SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4418-7
Glioblastoma (GBM) remains the most lethal primary brain tumor, with the blood-brain barrier (BBB) severely restricting effective treatment options. Immunotherapy has achieved remarkable success in cancers such as lung cancer and melanoma, yet its efficacy in GBM is constrained by the immunosuppressive tumor microenvironment and a paucity of tumor-infiltrating T cells. This study developed a biomimetic nanocomposite for the co-delivery of an immunogenic cell death (ICD) inducer and an indoleamine 2,3-dioxygenase 1 (IDO-1) inhibitor to overcome these challenges. Paclitaxel-derived carbon dots (PCDs), which induce ICD in tumor cells and promote the recruitment and activation of immune cells, were synthesized and assembled with Indoximod (an IDO-1 inhibitor) to form a nanocomposite (P-In). A biomimetic coating was subsequently applied to create M@P-In. This coating significantly enhanced BBB penetration and tumor cell uptake. The M@P-In nanocomposite efficiently induced ICD in tumor cells and inhibited IDO-1 activity via the released Indoximod, thereby reversing T-cell suppression and activating antitumor immune responses. Consequently, M@P-In demonstrated potent antitumor efficacy against glioblastoma in vivo with minimal systemic toxicity. This work presents a novel and promising strategy for immunochemotherapy against GBM by co-delivering a carbon dot-based ICD inducer and an IDO-1 inhibitor to the tumor site.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025012001
Nanozymes, nanomaterials capable of mimicking natural enzyme catalytic activity, exhibit exceptional stability, high catalytic activity, cost-effectiveness, and environmental friendliness, demonstrating immense potential in water treatment. This review article delves into the applications of metal nanozymes in water treatment, focusing on the pivotal roles of peroxidase-like, oxidase-like, and multi-enzyme active nanozymes. In this article, the central role of metals of nanozymes in the catalytic activity was analyzed, enhancing catalytic activity and the oxidation efficiency of pollutants. It is emphasized that the synergistic effect of bimetals further enhances catalytic activity and the oxidation efficiency of contaminants. This article offers profound insights into the catalytic mechanisms of nanozymes, providing a reference for selecting appropriate metals based on the characteristics of water pollution and developing metal nanozymes with specific catalytic activities.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202511010
Complete catalytic oxidation of methane requires catalysts with high low-temperature activity, long-term thermal stability, and excellent water resistance for industrial application. This study constructed supported Pd-Ru/S-1 bimetallic catalysts using hydrophobic all-silica zeolite Silicalite-1 as support. Systematic catalytic performance tests evaluated methane oxidation activity, thermal stability, and water resistance, while multiple physicochemical characterizations revealed the reaction mechanism. Results showed that the catalyst with Pd/Ru ratio of 2:1 (2Pd-1Ru/S-1) exhibited optimal comprehensive performance, achieving T90 of 380 °C, maintaining 94% methane conversion at 375 °C for 48 h, and demonstrating excellent water resistance. Mechanistic studies indicated that PdO is the main active phase, and the reaction follows the Eley-Rideal (E-R) mechanism. The electronic synergy between Pd and Ru enhances the interaction between PdO and the support, effectively inhibiting sintering and water poisoning of active components. This study aims to provide a new strategy for industrial catalyst design to advance the industrialization of low-concentration methane catalytic technology, addressing its climate and pollution impacts.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2026021202
To investigate the sources and health risks of heavy metals in PM2.5 during winter in Xi'an, hourly concentrations of eight heavy metals (Cu, Pb, Ni, Cr, etc.) were measured using an Amms-100 online analyzer at the Xi'an International Horticultural Exposition site from November 2024 to March 2025. The positive matrix factorization (PMF) model was applied for source apportionment, and the U.S. EPA health risk assessment model was used to evaluate carcinogenic and non-carcinogenic risks for different populations. Results showed that PM2.5 concentrations varied significantly across pollution levels, with an average of 173.5 μg·m−3 during heavy pollution, 4.1, 1.9, and 1.3 times higher than during non-pollution, light, and moderate pollution periods, respectively. Concentrations of Pb, Mn, and Cu increased with pollution level, indicating a combined effect of coal combustion and unfavorable dispersion. PMF identified five sources during non-pollution periods (industrial metallurgy, crustal dust, metal processing, etc.) but only four during polluted periods, with Cu contribution increasing significantly, suggesting a shift to traffic-related mechanical wear. Health risk assessment indicated that carcinogenic risks were highest in adult males, followed by adult females and children. Non-carcinogenic risks (HQ) for Zn and Cu were below 1, but Pb and Mn posed non-carcinogenic risks, with Mn being significant. The incremental lifetime cancer risks (ILCR) for As and Cr exceeded 10−4, identifying them as primary carcinogenic metals. This study provides scientific evidence for targeted air pollution control in Xi'an, emphasizing the need to strengthen controls on coal combustion, traffic, and industrial emissions during heating periods.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202512052
Constructed wetlands (CWs) with conventional substrates often exhibit limited removal of nitrogen and antibiotics from secondary effluent. This study developed an iron-carbon-manganese ore (Fe-C-Mn) composite substrate CW to enhance simultaneous removal of nitrogen and tetracycline (TC). Under influent TC of 2 mg·L−1 and total nitrogen (TN) of 15 mg·L−1, the Fe-C-Mn system achieved average TC removal of 91.3%, significantly higher than the gravel control (27.2%). TN and nitrate nitrogen (NO3−-N) removals reached 71.7% and 83.3%, respectively, versus 7.8% and 1.2% in the control. Substrate analysis revealed increased surface roughness and synergistic generation of active components (Fe(II)/Fe(III) and Mn(II)), driving autotrophic denitrification and TC biodegradation/chemical degradation. Microbial community analysis indicated reduced overall diversity but selective enrichment of potential TC degraders (e.g., Trichosporon, Bacillota) and denitrifiers (e.g., unclassified_f_Rhodocyclaceae). TC degradation pathways included demethylation, hydroxylation, and ring-opening, ultimately yielding small metabolites. These findings provide theoretical and technical support for enhanced removal of antibiotics and nitrogen from secondary effluent using CWs.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202608013
Eutrophication and cyanobacterial blooms threaten aquatic ecosystems and drinking water safety globally. This study evaluated the efficacy of a compound algicide (PQGA-126, PAC, and red soil) combined with submerged plants (Vallisneria natans and Hydrilla verticillata) for suppressing blooms and restoring eutrophic water. Indoor static experiments used algae-laden water from Nanhu Lake, Gongqingcheng, Jiangxi. Six treatments were established: control, V. natans alone, H. verticillata alone, algicide alone, algicide + V. natans, and algicide + H. verticillata. Results demonstrated that combined treatments significantly reduced total nitrogen (TN), total phosphorus (TP), chlorophyll-a (Chl-a), and turbidity, markedly lowering eutrophication within a short period. The combined approach outperformed single-plant treatments, with algicide + V. natans achieving the greatest reduction in the comprehensive trophic state index. Additionally, the algicide significantly enhanced V. natans growth rate and H. verticillata catalase (CAT) activity, indicating species-specific physiological responses. These findings suggest that integrating compound algicide with submerged plants, particularly V. natans, offers a promising strategy for rapid and effective eutrophic water remediation.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4097-3
The on-demand patterning of two-dimensional transition metal dichalcogenides (TMDs) with tailored edges is critical for electronic and optoelectronic applications but remains technically challenging. Here, we report a stress-guided anisotropic etching strategy for producing large-area, well-ordered MoS2 nanostructures, including nano-ribbons and nano-squares, without templates. By applying uniaxial cumulative stress followed by selective thermal etching, MoS2 monolayers are statistically etched into ribbon-like structures whose width inversely correlates with applied stress magnitude. The newly etched edges are macroscopically straight or serrated, predominantly Mo-zigzag terminated, and enhance photoluminescence by a factor of ~8.0. The edge type depends on the angle between stress direction and crystallographic orientation, corroborated by theoretical calculations. Biaxial stressing generates well-defined nano-squares, offering a scalable, versatile patterning route for engineering 2D materials with tailored functional edges, promising for electrocatalytic and optoelectronic applications.