SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3617-x
Macrophages are pivotal in infection resolution and tissue repair via dynamic M1-to-M2 phenotypic polarization. Although various nano-biomaterials can modulate macrophage polarization, achieving sequential M1-to-M2 transition using a single nanoformulation remains challenging. Here, we propose a strategy employing transition metal carbide/nitride (MXene) nanosheets, internalized by macrophages, as the sole regulator to induce sequential polarization. Under a rotating magnetic field, the high electrical conductivity and magnetoelectric activity of endocytosed MXene generate electrical signals and reactive oxygen species (ROS), driving M1 polarization. Upon magnetic field removal, the inherent bioactivity of MXene facilitates repolarization to the M2 phenotype. Mechanistically, this transition involves inhibition of the NF-κB signaling pathway and activation of the JAK-STAT signaling pathway. In vivo, MXene nanosheets under on-off rotating magnetic field stimulation enabled sequential M1-to-M2 polarization, promoting bacterial clearance and tissue regeneration in infected wounds. This two-step sequential strategy targeting macrophages offers a promising therapeutic approach for infected wound healing.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202506080
Thallium (Tl) is a highly toxic trace heavy metal, posing severe risks to human health and the environment. Cement kilns are significant sources of gaseous Tl emissions, with concentrations up to 25 μg·m−3, which can poison SCR catalysts and cause environmental contamination. This study developed MnO2/γ-Al2O3 adsorbents via wet impregnation with varying Mn loadings (0–15 wt%) to capture gaseous TlCl. Fixed-bed adsorption experiments at 300 °C with 20% O2 revealed that capture capacity initially increased with Mn loading, peaking at 10 wt% MnO2 (10MnO2/γ-Al2O3), then declined at 15 wt%. Characterization (XRD, O2-TPD, H2-TPR) indicated that Mn species enhanced redox properties, oxidizing Tl+ to Tl3+ and immobilizing it on the surface. DFT calculations showed that TlCl forms stronger Al–Cl and Mn–Cl bonds on MnO2/γ-Al2O3 than on γ-Al2O3, with higher adsorption energy and greater charge transfer, corroborating experimental results. The optimal adsorbent, 10MnO2/γ-Al2O3, demonstrates superior Tl capture performance, offering a promising upstream solution for protecting SCR catalysts and reducing atmospheric Tl emissions from cement kilns.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3847-5
The convergence of artificial intelligence, Internet of Things, and soft electronics has advanced tactile perception in flexible electronic skins, enabling applications in robotics, healthcare, and human-machine interfaces. However, conventional tactile sensing architectures separate sensing and processing, requiring analog-to-digital converters and data transfer to microcontrollers, which is energy-intensive and introduces latency. In-sensor computing integrates sensing and processing, reducing power consumption and enabling in-situ analog operations such as multiplication-accumulation (MAC) for artificial neural networks. Wang et al. developed a capacitive in-sensor tactile computing system combining a flexible pressure sensor array with electrical switching networks and a fixed capacitor to perform MAC operations in the charge domain. The sensor unit uses an ionic dielectric layer of PVA/H3PO4 prepared via sandpaper-templated molding, sandwiched between Au electrodes on waterborne polyurethane substrates, achieving high sensitivity of 0.36 nF/kPa and excellent stability. A 3×3 kernel of sensors with programmable bias voltages implements averaging and Laplacian filters for noise reduction and edge detection, validated experimentally. The system processes binary and analog tactile stimuli, with output voltage scaling proportionally with pressure. This in-sensor computing approach addresses energy and latency bottlenecks, offering a pathway for real-time, power-constrained e-skin applications in autonomous robotics, prosthetics, and intelligent interfaces.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202607017
Distillers' grains, the largest organic solid waste stream in the brewing industry, require efficient low-carbon valorization to support China's Dual Carbon Goals. This study employs life cycle assessment (LCA) to quantify CO2 emissions and carbon reduction benefits of two mainstream routes: pyrolysis to biochar and fermentation to organic fertilizer. Based on public process data, the total life-cycle CO2 emission for biochar production from 1 t of distillers' grains is 250.02 kg, with a carbon sequestration reduction of 120.29 kg, demonstrating superior long-term carbon fixation. In contrast, organic fertilizer production emits 536.14 kg CO2 per ton, achieving a carbon reduction of only 86.22 kg, indicating inferior mitigation performance. Techno-economic analysis reveals net profits of 471.97 CNY/t for biochar and 822.27 CNY/t for organic fertilizer, showing that the organic fertilizer route offers higher profitability. Both pathways effectively reduce CO2 emissions, with biochar prioritizing environmental sustainability and organic fertilizer excelling economically. This study provides data-driven insights for selecting organic solid waste recycling strategies, promoting low-carbon technologies, and establishing circular economy models in the brewing industry.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4181-6
Green hydrogen production via electrocatalytic water splitting is pivotal for sustainable energy, yet the high cost and scarcity of platinum (Pt) catalysts impede large-scale adoption. Ruthenium (Ru)-based materials emerge as promising alternatives, but their performance requires enhancement. Two-dimensional transition metal dichalcogenides (TMDs), particularly ReS2, offer intrinsic 1T' phase with good conductivity and stability, yet suffer from inert surfaces limiting water adsorption. Here, we report a heterostructure comprising Ru nanoclusters anchored on ReS2 nanosheets (Ru/ReS2) to modulate electronic structure via d-p coupling. This design enhances water dissociation kinetics and optimizes hydrogen adsorption free energy (ΔG_H*). The Ru/ReS2 catalyst exhibits superior hydrogen evolution reaction (HER) activity in acidic media, achieving an overpotential of 47 mV at 10 mA cm−2 and a Tafel slope of 38 mV dec−1, outperforming commercial Pt/C (overpotential 54 mV, Tafel slope 45 mV dec−1). Notably, it demonstrates exceptional stability, with negligible degradation after 10,000 cyclic voltammetry cycles, contrasting with Pt/C's 54 mV overpotential increase. Density functional theory calculations reveal that d-p coupling between Ru and ReS2 optimizes the electronic structure, facilitating water adsorption and dissociation. This work provides a rational strategy for designing efficient, durable, and cost-effective HER electrocatalysts for green hydrogen production.