SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4319-x
This erratum corrects an error in the Acknowledgments section of the original article 'Investigation on graphene growth by roll-to-roll chemical vapor deposition' published in Science China Materials, Vol. 65, Issue 4, page 1042, 2022. The authors regret that the funding number (No. (2021)105) for the Shenzhen Science and Technology Program was incorrectly used. The correct funding number is No. KQTD20200820113010022. The authors apologize for any inconvenience caused. This correction does not affect the scientific content, results, or conclusions of the original paper. The original research focused on the kinetics of graphene growth via roll-to-roll chemical vapor deposition (CVD), a scalable method for producing high-quality graphene films. The study addressed challenges in continuous manufacturing, such as uniformity, growth rate, and defect control, and provided insights into optimizing process parameters for industrial-scale production. The erratum ensures accurate attribution of funding sources, maintaining the integrity of the research record.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3748-9
Direct regeneration is a sustainable solution for recycling spent lithium-ion batteries (LIBs), yet the irregular strains induced by the irreversible FePO4 phase after cycling hinder Li+ replenishment in spent LiFePO4 cathodes. This study proposes a lattice stress modulation strategy that reduces FePO4 to Fe2P2O7, reducing unit cell volume from 271.7 to 122.6 Å3, releasing residual stress and reconstructing continuous Li+ transport channels. The phase transformation reconstructs FeO6 octahedra, lowering the migration energy barrier for ions. This synergistically weakens steric effects, facilitating Li+ replenishment and eliminating Li-Fe anti-site defects. Regenerated LiFePO4 cathodes achieve 80.2% capacity retention after 1000 cycles at 2C, outperforming commercial cathodes. The work establishes fundamental principles for the pre-treatment stage of direct regeneration and provides a paradigm-shifting solution for sustainable LIB recycling.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202507038
To enhance the engineering practicality of pollutant pre-assessment, this study conducted environmental chamber tests for formaldehyde and TVOC emissions from 34 common decoration materials (25 solid and 9 liquid categories). Using the IndoorPACT software, variations in indoor pollutant concentrations under different material area loading rates and air change rates were simulated. Taking Harbin as a case study, concentration response ranges for various single materials under different area loading and ventilation conditions were simulated, leading to the construction of a simplified concentration prediction reference table. Results indicate that indoor pollutant concentrations from both solid and liquid materials peak on the second day after decoration, but decay rates differ significantly: liquid materials decrease by 70%–90% within about one week, and given their typically higher area loading rates in real projects, they exert a more significant impact on indoor air quality in the early post-decoration period. In contrast, solid materials decay more slowly and become the dominant long-term pollution source. The simplified estimation method based on these emission characteristics demonstrates good engineering applicability, providing effective reference for material selection, scheme comparison, and preliminary indoor air quality prediction and control in actual decoration projects.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3862-x
Hexagonal boron nitride (hBN) is indispensable for next-generation electronics and quantum technologies, yet controlled synthesis of isotopically engineered hBN with macroscopic scalability and atomic-level precision remains challenging. Here, we present a plasma-enhanced chemical vapor deposition (PECVD) method using elemental boron (B) and nitrogen (N) precursors to achieve wafer-scale growth and precise isotopic control of hBN films. High-quality hBN films are synthesized on Cu substrates via optimized B evaporation and N2 plasma activation. The growth mechanism involves an oxygen-mediated pathway for B transport and a layer-by-layer (Frank-van der Merwe) mode for multilayer formation. By employing isotopically enriched B powders (10B and 11B) and N2 gases (14N2 and 15N2), we demonstrate tunable isotopic compositions with phonon mode shifts quantitatively matching harmonic oscillator predictions. Furthermore, we realize unprecedented in-plane h10BN-h11BN heterostructures through dynamic B source switching during growth. This PECVD strategy establishes a transformative synthesis platform merging industrial-scale production capacity with atomic-scale isotopic precision, enabling new opportunities to engineer thermal transport, optical response, and quantum coherence in two-dimensional materials.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2026050701
Azo food colorants are persistent aquatic pollutants posing risks to ecosystems and human health. Utilizing biomass waste to produce low-cost activated carbon offers a sustainable strategy for their removal. In this study, activated carbon (HPR-AC) was synthesized from Haematococcus pluvialis residue via phosphoric acid activation, and its adsorption performance was evaluated using Sunset Yellow (SY), Ponceau 4R (P4R), and Tartrazine (TY) as model pollutants. The effects of solution pH, adsorbent dosage, initial dye concentration, and temperature on adsorption efficiency were systematically examined. Characterization by BET, FTIR, XRD, and XPS revealed that HPR-AC possesses a high specific surface area and an abundant mesoporous structure. The adsorption process was well described by the Langmuir isotherm and pseudo-second-order kinetic models, indicating monolayer chemisorption and an endothermic nature. At pH 5 and 55 °C, the maximum adsorption capacities reached 67.12, 79.72, and 72.75 mg·g−1 for SY, P4R, and TY, respectively. Statistical physics modeling further suggested a multilayer physical adsorption mechanism, primarily governed by pore filling, electrostatic interactions, hydrogen bonding, π-π stacking, and charge transfer. These findings provide both theoretical insights and empirical data for the valorization of H. pluvialis residue and the development of efficient, sustainable adsorbents for azo dye removal from water.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4132-y
Manganese-iron-based mixed polyanionic cathodes are promising for sodium-ion batteries (SIBs) due to high energy density and operating voltage, but suffer from Jahn-Teller distortion of Mn3+ that degrades cycling stability. Here, a structural modulation strategy via Mg2+ doping is reported. Electrochemically inert Mg2+ forms stronger chemical bonds, adjusts lattice parameters, and suppresses Jahn-Teller distortion, enhancing structural stability. Mg2+ also widens sodium-ion diffusion channels, improving diffusion kinetics. Additionally, an in-situ three-dimensional carbon nanotube (CNT) conductive network boosts electronic conductivity. The resulting NFMPP-Mg@CNTs cathode delivers a discharge capacity of 126 mAh g−1 at 0.1 C (near theoretical 129 mAh g−1), retains 80% capacity after 3000 cycles at 0.5 C, and achieves an energy density of 401 Wh kg−1, among the highest reported for mixed phosphate systems. Ex-situ XPS and first-principles calculations confirm that Mg2+ resists geometric distortion by enhancing lattice stability and widening Na+ diffusion pathways (migration barrier reduced from 0.566 to 0.398 eV). This work provides a viable route for high-energy, long-life SIB cathodes suitable for large-scale energy storage.