SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4194-2
Lanthanide-doped upconversion nanoparticles (UCNPs) exhibit distinctive optical characteristics, including excellent photostability, large anti-Stokes shifts, narrow emission bands, and tunable luminescence lifetimes. Despite their advantages, UCNPs suffer from inherently weak light absorption because of the 4f-4f transitions of lanthanide ions. Near-infrared dye-sensitization has emerged as an effective strategy to enhance their absorption, yet the photoconversion performance remains constrained by photobleaching and interfacial energy losses. In this review, we systematically analyze the surface coordination environments and energy transfer pathways that govern dye-sensitized UCNPs. We evaluate critical molecular parameters, such as dye frameworks, surface binding affinity, and triplet-state energy alignment, in conjunction with nanoparticle structural features, including dopant concentration, core-shell architectures, and surface electronic configurations. By providing a fundamental assessment of these photophysical and photochemical processes, we propose targeted optimization strategies to enhance the performance and stability of these hybrid materials for advanced applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4203-7
The solution process holds great promise for organic light-emitting diode (OLED) fabrication owing to its minimal material loss, simple processing and low equipment investment. However, solution-processed blue OLEDs still face the challenges of low electroluminescence efficiency and poor working stability. In this study, two new cross-linkable blue light-emitting molecules, v-4CzBn and v-5CzBn, were synthesized. They featured a multicarbazole-substituted benzonitrile donor–acceptor structure as the emitting core, with two vinyl phenyl units on the carbazole rings serving as cross-linking groups. A singlet–triplet energy gap of ΔEST ≤ 0.10 eV and a high reverse intersystem crossing rate (kRISC > 10^6 s−1) were achieved because the three-dimensionally confined covalent network structure formed through a thermal cross-linking reaction limited intramolecular motions and vibrational relaxations of luminescent units. Moreover, this structure suppressed irreversible morphological changes and structural deterioration of light-emitting units due to aggregation or crystallization, improving the light-emitting performance of the device. Nondoped solution-processed OLEDs with the structure of ITO/PEDOT:PSS/TFB/S-4CzBn/TPBi/LiF/Al exhibited blue emission with a peak at 488 nm, achieving a maximum external quantum efficiency of 12.01%, a maximum luminance of 11,141.15 cd m−2, and a T50 lifetime of 1375.66 h@100 cd m−2. This result represents the longest operational lifetime reported to date for solution-process devices with cross-linked emitting layers.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3693-0
The development of catalysts with highly efficient oxygen evolution performance and low-Ir loading is key to scaling up the application of proton exchange membrane (PEM) water electrolysis technology. Here, an Ir-skin catalyst (Ir@KM) is realized on a potassium-manganese oxide (K0.25MnOx (KM)) using an ion-exchange method. The Ir-skin over the prepared Ir@KM has a low Ir–Ir atomic distance, endowing an energetically favorable oxide path mechanism to allow a low theoretical overpotential of 0.13 V. Ir@KM offers a low overpotential of ~280 mV at a current density of 10 mA cm−2 and provides a high mass activity of up to 18,500 A gIr−1 at a cell voltage of 1.8 V in PEM, which is 17.6 times higher than that of IrO2, demonstrating a significant advantage in reducing the cost of the membrane electrode. The presented Ir-skin concept represents a promising strategy to fabricate low-Ir catalyst with high activity and durability for practical applications of PEM.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3713-y
Layered double hydroxides (LDHs) are promising electrocatalysts for the oxygen evolution reaction (OER), yet their practical application remains limited by poor electrical conductivity and sluggish reaction kinetics. In this work, we synthesize three high-entropy LDHs (HELDHs) featuring a hierarchical architecture of microspheres assembled from ultrathin nanosheets, via a simple hydrothermal method using a combination of low-cost, catalytically active transition metals (Fe, Co, Ni, Mn, Zn, Cu, and Cr). Among them, the FeCoNiMnZn HELDH exhibits outstanding OER performance, requiring an overpotential of only 306 mV to reach a current density of 100 mA cm−2. Notably, during 200 h of continuous operation, the device exhibits a stable and, in some cases, increasing current output. This exceptional activity is attributed to the formation of abundant cation vacancies, induced by Zn leaching, which enhance the intrinsic catalytic properties by optimizing the adsorption energies of key OER intermediates. Density functional theory calculations further validate that these vacancies modulate the electronic structure and lower reaction barriers, underscoring the effectiveness of cation-vacancy engineering in high-entropy systems for efficient and durable water oxidation catalysis. The optimized catalyst was further evaluated as the air cathode in a zinc–air battery, demonstrating practical electrochemical performance.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202507029
This study systematically evaluates the environmental risks associated with the resource utilization of municipal solid waste incineration (MSWI) fly ash in the production of aerated concrete, co-prepared with multiple solid wastes. The focus is on the leaching behavior and total content of heavy metals (Cr, Pb, Cd, Cu, Zn) under CO2 curing and chelating agent stabilization. Water washing pretreatment parameters (liquid-to-solid ratio, washing time, ash-to-slag ratio) were optimized for chloride removal. Results demonstrate that CO2 curing suppresses the leaching of most metals; leaching concentrations of Cr, Pb, Cd, and Zn decrease with reduced fly ash content, whereas Cu leaching increases when fly ash is absent. The addition of 17.5% organic sulfur stabilizer (DTC) significantly outperforms inorganic sulfide (Na2S) in immobilizing heavy metals, achieving compliance with national standards without compromising compressive strength or carbon sequestration. Water washing effectively reduces soluble chloride content to below 1% (mass fraction), meeting the HJ 1134-2020 regulatory limit. Optimal parameters include a liquid-to-solid ratio of 5, washing time of 20 min, and a raw material ratio of incineration bottom slag:fly ash:slag = 40:20:40. Under these conditions, the final product exhibits a compressive strength of 1.50 MPa, with heavy metals and soluble chlorides fully compliant. This work provides key technical support for the safe recycling of MSWI fly ash in building materials.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202604020
Source reduction of volatile organic compounds (VOCs) from industrial emissions is a core task for air quality improvement during China's 15th Five-Year Plan period. Supercritical carbon dioxide (ScCO2) spraying technology emerges as a cutting-edge VOCs abatement approach, as it reduces both VOCs content in coatings and coating consumption. However, empirical research on coating efficiency enhancement and VOCs emission reduction at demonstration scale remains scarce. This study selected three solvent-based coating systems widely used in Chinese industry: wooden furniture-polyurethane, wooden furniture-acrylic, and metal parts-fluorocarbon. A calculation method for ScCO2 spraying efficiency and VOCs emission reduction rate was established, and emission reduction performance was systematically measured. Results indicated that compared with high-pressure airless spraying, average coating efficiency improvement rates of ScCO2 spraying at spray distances of 60 cm and 40 cm across the three scenarios were (30.62±8.75)% and (31.74±12.83)%, respectively. Correspondingly, average VOCs emission reduction rates were (62.10±1.59)% (60 cm) and (53.73±11.78)% (40 cm). VOCs content reduction rates for the three systems were 46.03%, 23.80%, and 37.60%, respectively. Diluent addition was reduced from 60% to 10%, achieving a substitution rate of 83%. The study confirms that ScCO2 spraying can achieve significant reductions in VOCs and solvent emissions in wooden furniture and metal parts coating processes, providing empirical support for industrial promotion.
The Chinese Journal of Process Engineering•2026•DOI: 10.12034/j.issn.1009-606X.225184
Thermal power units have long dominated China's energy structure due to the low cost of coal and their role in ensuring grid stability. However, under the dual pressures of climate change and national carbon peaking/neutrality goals, the environmental impact of their 'three wastes' has become critical, necessitating energy-saving retrofits. This review systematically examines mainstream energy-saving technologies for thermal power units, including boiler combustion optimization, heating surface cleaning, turbine flow path upgrades, waste heat recovery and cascade utilization, and cold-end system optimization. Using coal consumption rate as the core economic index, the study integrates case studies and operational data from typical domestic and international units to evaluate the latest progress, practical effects, advantages, and limitations of each technology. Results indicate that these technologies significantly improve energy efficiency and reduce pollution. For instance, boiler combustion optimization based on support vector machines and neural networks enhances thermal efficiency and reduces NOx emissions. Turbine flow path modifications, from full three-dimensional CFD optimization to advanced blades and combined steam seals, yield notable gains in cylinder efficiency and heat rate reduction. Low-temperature economizers reduce coal consumption and auxiliary power/water use in dust removal and desulfurization systems. Heat pump applications include absorption, compression, and hybrid types. In cold-end optimization, data-driven predictive maintenance and real-time performance tuning of condensers achieve nearly 50% energy savings in circulating water pumps and an average coal consumption reduction of 2-3 g/(kW·h). Despite these advances, gaps remain in multi-objective optimization robustness, intelligent diagnosis, and advanced materials. Future research should focus on deep reinforcement learning for adaptive control, sensor networks for real-time diagnostics and predictive maintenance, and high-temperature corrosion-resistant materials for heat exchangers, while balancing initial investment and maintenance costs.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3633-5
High-temperature interfacial diffusion in Half-Heusler (HH) thermoelectric devices poses significant challenges for practical applications, particularly the diffusion of Ag from conventional solders, which degrades material performance and device stability. This study reveals anomalous Ag diffusion through a Cr powder barrier layer into Ti0.5Zr0.5NiSn0.98Sb0.02, driven by Sn phase penetration. In contrast, employing a Cr foil barrier layer pre-densified the material, effectively preventing Sn phase penetration and eliminating Ag diffusion pathways, thereby preserving junction integrity. After aging at 973 K for 30 days, the Cr foil junction maintained a clean interface with a low contact resistivity of 0.27 μΩ cm2. Benefiting from this interfacial design, a Hf-free HH module achieved a high conversion efficiency of 10.4% at a hot-side temperature of 976 K, alongside long-term stability. This work addresses critical bottlenecks in developing high-performance, low-cost HH modules, facilitating their commercial application in waste heat recovery.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3802-0
Exploring efficient bifunctional electrocatalysts for both hydrogen and oxygen evolution reactions is key to water electrolysis. However, the inherently slow reaction kinetics of electrocatalysis are constrained by mass transfer limitations and unsuitable adsorption/desorption dynamics. Herein, a Fe-doped-Ni3S2/NiFeCoCeIn oxide hydroxide (FNS/HEOXY) crystalline–amorphous heterostructure electrocatalyst with a large work function difference (ΔΦ) and strong built-in electric field (BEF) is successfully designed and synthesized. Benefiting from the electron transfer behavior from FNS to HEOXY, the FNS/HEOXY shows outstanding catalytic activity for both hydrogen and oxygen evolution, along with ultra-high stability in an alkaline medium at an industrial-level current density. Moreover, the anion exchange membrane water electrolyzer (AEMWE) assembled by the FNS/HEOXY requires only a minimal cell voltage of 1.83 V to reach 1 A cm−2 at 80 °C. Both experimental and theoretical results confirm the interfacial charge redistribution induced by the strong BEF, thus finely optimizing the adsorption energy. This work proposes a new design principle toward efficient electrocatalysts for energy conversion.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3818-4
The electrocatalytic reduction of carbon dioxide (CO2RR) to multi-carbon (C2+) products is of significant interest due to its implications for chemical manufacturing and carbon neutrality. However, the competitive hydrogen evolution reaction (HER) and sluggish C–C coupling kinetics impede selectivity at industrial current densities. Here, we report an interfacial nanoconfinement strategy using N-(2-acetamido)iminodiacetic acid (ADA) to engineer a series of capping layer-covered Cu catalysts (Cu@ADA-x). A volcano-type correlation between capping layer thickness and C2+ selectivity is observed. The optimized Cu@ADA-m catalyst achieves a maximum Faradaic efficiency for C2+ products (FE C2+) of 86.8% and maintains over 80% of its initial FE C2+ after 42 hours at 200 mA cm−2, with an energy efficiency of 38.5%. In-situ Raman spectroscopy and density functional theory (DFT) calculations reveal that the capping architecture stabilizes metastable Cu species and optimizes gas adsorption, enhancing *CO intermediate utilization and lowering C–C coupling energy barriers. This work provides a catalyst design principle for industrial-scale carbon-neutral electrochemical production of multi-carbon products.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202509124
To reveal the spatiotemporal evolution and driving mechanisms of water quality in the Hanjiang River Basin, this study utilized monthly water quality monitoring data from 54 sections from January 2021 to April 2024. Methods including single-factor index, comprehensive water quality index (WQI), principal component analysis (PCA), and optimal parameters-based geographical detector (OPGD) were employed. Results indicated significant spatiotemporal differences, with total nitrogen (TN), chemical oxygen demand (COD), and permanganate index (CODMn) as major pollutants, TN being the most critical. Temporally, agricultural non-point source organic pollution dominated in wet season, while comprehensive organic pollution with industrial point source characteristics prevailed in dry season. Spatially, water quality deteriorated along the main stream, with tributary downstream areas showing severe pollution, forming a pattern of 'mountainous areas good, plains poor'. OPGD revealed combined effects of natural conditions and human activities, proposing a 'zonal control and targeted treatment' strategy.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202606004
To identify optimal watershed remediation pathways under environmental and economic dimensions, an integrated environmental-economic impact assessment framework combining life cycle assessment (LCA) and life cycle costing (LCC) based on openLCA was established, using 1 m³ of treated wastewater as the functional unit. This framework comprehensively evaluated the environmental impacts and economic costs of three ecological buffer measures—constructed wetlands, ecological intercepting ditches, and vegetation restoration projects—in non-point source pollution control. The results indicated that constructed wetlands offer the optimal environmental-economic profile, featuring the lowest comprehensive cost (¥1.01 yuan/m³) and the lowest load across most environmental impact categories, with only slightly higher land resource consumption intensity. Ecological intercepting ditches exhibited higher impacts in areas such as metal resource consumption due to the use of rebars and base fertilizer inputs, resulting in a moderate comprehensive cost (¥1.57 yuan/m³). Vegetation restoration projects incurred the highest comprehensive cost (¥61.14 yuan/m³) and produced the most significant environmental impacts, with elevated indicators such as human carcinogenic toxicity. This primarily stemmed from the extensive use of concrete grass pavers and base fertilizer in rural river sections. These findings provide quantitative references for environmental-economic integrated evaluation and decision-making regarding ecological buffer zone engineering schemes in similar watersheds.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3769-2
Proton exchange membrane water electrolyzers (PEMWEs) are pivotal for sustainable hydrogen production, yet the corrosion-induced TiOx on porous transport layers (PTLs) introduces Schottky contact barriers and pinch-off effects, severely impeding charge transfer and efficiency. Here, a cost-effective MoIrOx coating via spray deposition and thermal treatment on Ti felts is proposed. The coating forms a conductive interlayer that establishes a Schottky barrier staircase, reducing the effective electron transfer barrier and isolating TiOx from the ionomer to mitigate the pinch-off effect. The optimal PTL achieves a current density of 3.27 A cm−2 at 2 V, surpassing uncoated Ti felts by 59.5%. The MoIrOx interlayer suppresses localized electron accumulation at the interface, enabling stable operation with ultra-low catalyst loadings by preventing direct ionomer-TiOx contact. This work demonstrates a scalable strategy to enhance PEMWE efficiency and durability while minimizing precious metal reliance, offering critical insights into interface engineering for electrolyzers.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3811-6
The oxygen evolution reaction (OER) is a critical bottleneck in electrochemical water splitting, yet the stability of supported OER electrocatalysts under industrial conditions remains a formidable challenge. Here, we report an ultrastable supported OER electrocatalyst fabricated via a ripening-induced embedding strategy. This approach leverages controlled Ostwald ripening to embed catalytically active nanoparticles into a conductive oxide support, dramatically enhancing mechanical and electrochemical adhesion. The resulting catalyst exhibits an overpotential of only 245 mV at 10 mA cm−2 in 1 M KOH, with negligible degradation after 1000 hours of continuous operation at 100 mA cm−2, representing a 50-fold improvement in durability compared to conventional supported catalysts. Structural analyses reveal that the embedded architecture mitigates nanoparticle detachment and coalescence, preserving a high electrochemically active surface area (ECSA) of 85 m² g−1. Furthermore, the catalyst demonstrates exceptional performance in a proton exchange membrane (PEM) electrolyzer, achieving a cell voltage of 1.72 V at 1 A cm−2 with a decay rate of only 0.12 mV h−1 over 500 hours. This work provides a generalizable route to design robust OER electrocatalysts for industrial-scale water electrolysis, addressing the critical stability bottleneck that has hindered the deployment of renewable hydrogen production.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202509036
Algal-derived phosphorus (P) constitutes a significant fraction in eutrophic lakes, with particulate phosphorus (PP) serving as both a major internal P reservoir and a potential target for P resource recovery. This study proposed a chitosan-coupled electroflotation (CEF) technology for efficient enrichment and recovery of algal-derived P from high-algal water. Using Taihu Lake algae-laden water as the test medium, the effects of chitosan dosage and voltage on the enrichment of different P fractions were systematically evaluated. Results showed that the optimal P enrichment was achieved at a chitosan dosage of 15 mg·L−1, and higher voltages further enhanced the enrichment efficiency. Under optimal conditions, PP accounted for 83.57% of the enriched P, indicating a strong capability for particulate P capture. The mechanism involved chitosan-induced flocculation via charge neutralization and sweep flocculation, while higher voltages increased the positive charge density of chitosan molecules, enhancing charge neutralization and electroflotation. In P release experiments, open conditions significantly promoted the transformation of PP to dissolved P, whereas closed conditions inhibited this process. Additionally, chitosan's antibacterial action and physical retention effectively limited P release. Compared with conventional metal salt coagulants, this method avoids metal ion residues, offering high environmental safety and providing a green and feasible approach for the harmless disposal and resource utilization of algal-derived P in eutrophic lakes.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3989-4
Organic-inorganic hybrid metal halides (OIMHs) based on Cu(I) ions exhibit broad application prospects in stimulus-responsive luminescent materials due to their rich structural diversity and highly adjustable electronic states. However, achieving sensitive and broad-temperature-range thermal responses remains a significant challenge. Here, we synthesize a zero-dimensional warm white-light emitting OIMH, MPC-W ((C9H20N2O)4(Cu2I4)(Cu2I6)(H2PO2)2), using 4-morpholinopiperidine (4-MP) and CuI. MPC-W features hybrid structures of [Cu2I4]2− and [Cu2I6]4−. The coexistence of three luminescent mechanisms—organic cluster luminescence (CL), self-trapped exciton (STE) emission of [Cu2I6]4−, and cluster-centered (CC) state luminescence of [Cu2I4]2−—endows MPC-W with temperature- and excitation-wavelength-dependent dynamic luminescence. From 77 to 297 K, the luminescence color continuously tunes from blue to cyan, green, yellow-green, and white. In the range of 217–463 K, MPC-W exhibits abnormal luminescence enhancement with increasing temperature. Upon chemical stimuli, MPC-W reversibly transforms into blue-emitting MPC-B ((C9H20N2O)Cu2I4) and yellow-emitting MPC-Y ((C9H18N2O)7Cu8I8). These dynamic luminescent properties position MPC-W for applications in temperature sensing, optical anti-counterfeiting, and password locks. This work provides new insights for developing wide-temperature-responsive multifunctional intelligent luminescent materials.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3922-2
Photocatalytic reduction of CO2 to syngas (CO and H2) is pivotal for Fischer-Tropsch synthesis and carbon neutrality, yet suffers from rapid charge carrier recombination. Here, we report a solvent-induced defect engineering strategy to fabricate nitrogen vacancy (Nv)-modified Fe3O4 (Fe3O4-Nv-12h). Under visible light (λ ≥ 420 nm), Fe3O4-Nv-12h achieves a total syngas production rate of 43.55 mmol g−1 h−1 with a near 1:1 CO/H2 ratio, representing an 805.2-fold enhancement over pristine Fe3O4 and surpassing state-of-the-art systems. Electron paramagnetic resonance (EPR) and X-ray photoelectron spectroscopy (XPS) confirm that Nv introduction modulates the electronic structure, acting as electron traps to suppress recombination and enhance charge transport. In situ Fourier transform infrared (FTIR) spectroscopy identifies *COOH and *CO as key intermediates for CO formation. This work establishes an effective nitrogen vacancy modification strategy for efficient photocatalytic CO2 conversion to syngas, offering new avenues for high-performance catalyst design.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3995-6
The deployment of single-site metal catalytic nodes into zirconium-based metal-organic frameworks (Zr-MOFs) offers vast advantages in catalytic recyclability, product separation, and mechanistic analysis, underscoring their paramount significance in heterogeneous catalysis. Nonetheless, their occupation within pores/channels usually diminishes mass transfer and catalytic efficiency during reactions such as the hydroboration of carbonyl compounds, especially for bulkier substrates. To address this issue, three microporous single-site Ti(IV) embedded Zr-MOFs with sequentially extended ligand arms are novelly synthesized to enable precise pore modulation ranging from 9.04, 10.12, to 11.18 Å. The catalytic performance is investigated using eight carbonyl compounds of varying sizes and four additional larger-scale substrates, which demonstrates that the catalytic efficiency is increased through pore size regulation, yet still away from optimal catalytic performance. Then a further strategy was shifted to the linker installation of linear dicarboxylate ligands chelated single-site Ti(IV) within coordination-unsaturated windows of mesoporous Zr-MOFs, and the result elucidates that the obtained catalyst exhibits superior catalytic efficiency (all exceeding 90%) while preserving the inherent mesoporosity of Zr-MOFs with a pore size of approximately 21.73 Å. We believe this research provides critical guidance for future research on structural design and catalytic optimization of MOFs, opening new avenues in heterogeneous catalysis.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4116-0
The design of solid electrolyte interphases (SEIs) for poly(vinylidene fluoride)-based solid-state batteries has largely focused on solvent-affinity of Li+ to generate robust but ionically sluggish LiF-rich layers, inherently compromising transport kinetics. Here, we establish a paradigm based on quantifiable physicochemical descriptors (ionic potential and donor number) to guide the design of amphitropic ion pairs (AIPs). These AIPs are engineered to simultaneously tailor both the solvent-affinity and anion-affinity of Li+: a solvent-philic cation with high ionic potential (Al3+) first sequesters reactive solvents, clearing the path for a high-donor-number, lithium-philic anion (NO3−) to remodel solvation. This rationally guided, sequential mechanism enables the in situ synthesis of a LiF/Li3N heterostructured SEI, where dendrite-suppressing LiF domains are seamlessly integrated with ultra-fast Li3N ion channels. This design heterogeneity effectively enhances stability and kinetics, yielding a robust and highly conductive interface. Consequently, Li|Li cells achieve >2000 h of stable cycling, and Li|LiNi0.8Co0.1Mn0.1O2 full cells surpass 600 cycles.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4126-0
Flexible X-ray detectors are constrained by the difficulty of producing semiconductor films that simultaneously exhibit uniform morphology, high crystallinity, and mechanical robustness. Here, we introduce a hydrogen-bond engineered supramolecular (HBES) strategy to overcome these limitations in supramolecular bismuth halide clusters (PDBiI5). By incorporating polyacrylic acid (PAA), a dynamic supramolecular network is formed that suppresses the coffee-ring effect during ultrasonic spray-coating via increased solution viscosity and controlled kinetic balance between solvent evaporation and solute diffusion. The HBES approach also modulates crystallization kinetics, extending crystal growth time from 23 to 41 s, yielding densely packed films with enhanced crystallinity and reduced defect states. These improvements lead to superior charge transport: a hole mobility of 2.16 cm2 V−1 s−1 and a mobility-lifetime product of 9.1 × 10−4 cm2 V−1. The resulting X-ray detectors achieve a record sensitivity of 19,009 μC Gyair−1 cm−2 and an ultralow detection limit of 3.35 nGyair s−1, with excellent operational and environmental stability. Leveraging the mechanical robustness from the supramolecular network, we demonstrate the first direct-type flexible X-ray imager, retaining 85% performance after 1000 bending cycles. This imager overcomes geometric distortion and vignetting, maintaining 85% edge photocurrent versus 58% for rigid detectors, enabling clear imaging of curved objects. This work establishes a versatile supramolecular engineering paradigm for high-performance flexible X-ray detection and imaging.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4196-x
Aqueous zinc-ion batteries (AZIBs) are promising for safe, low-cost energy storage, but accurate cathode characterization is essential for understanding their electrochemical behavior. This study identifies a critical artifact: routine air-drying of deeply discharged cathodes triggers spontaneous aerial oxidation, which distorts post-mortem analysis. Using NH4V4O10 (NVO) as a model cathode, we show that ex situ X-ray photoelectron spectroscopy (XPS) of discharged electrodes reveals only V4+/V5+ signals, with no detectable V3+, implying a theoretical capacity of only 245.5 mAh g−1, yet experimentally measured capacity reaches ~334.5 mAh g−1 at 0.2 A g−1. This discrepancy arises because air exposure during sample preparation oxidizes the reduced vanadium states, leading to a self-charging effect that recovers ~83% of capacity. Electrochemical re-oxidation (EO-NVO) is superior to aerial oxidation (AO-NVO), producing a stable, long-range ordered bulk structure with efficient Zn2+ transport channels, whereas aerial oxidation induces only superficial changes and structural disorder. These findings resolve a key analytical inconsistency and reveal a novel capacity-contribution pathway, with direct implications for accurate material assessment and advanced battery design.