SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4505-9
Transition metal hydroxides are promising oxygen evolution reaction (OER) catalysts for alkaline water electrolysis. This study reports Ce-doped Co(OH)2 electrocatalysts synthesized via one-step electrodeposition, where the Ce3+/Ce4+ ratio is precisely controlled by deposition temperature. The optimized Ce-Co(OH)2 catalyst, obtained at 40°C, exhibits an overpotential of 236 mV at 10 mA cm-2 and maintains stability for 200 h. In an anion-exchange membrane water electrolyzer (AEMWE), the Ce-Co(OH)2 anode achieves a cell voltage of 2.04 V at 1 A cm-2 and operates for over 500 h at 500 mA cm-2. Mechanistic analysis reveals that Ce3+/Ce4+ dynamic electron buffering regulates surface reconstruction: during OER, electron transfer direction reverses (Ce → O → Co), with Ce donating electrons to Co sites to prevent over-oxidation and structural collapse. This work establishes a versatile strategy for balancing surface reconstruction and structural stability in Co-based OER catalysts, providing a foundation for designing high-performance, durable alkaline water oxidation electrocatalysts.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3581-2
Radiotherapy (RT) is a standard cancer treatment that directly kills tumor cells and promotes systemic immune responses. However, RT can exacerbate tumor hypoxia, which suppresses dendritic cell (DC) antigen presentation and weakens systemic anti-tumor immunity. Here, we report oxygen-loaded in situ gels carrying bacterial outer membrane (MOGel) that slowly degrade to release oxygen and bacterial outer membrane (OM). Oxygen release alleviates tumor hypoxia, while OM continuously activates DCs, enhancing their antigen-presenting capability. In vitro, MOGel combined with RT induced the strongest tumor cell apoptosis. In an orthotopic colon cancer model, MOGel+RT achieved an 80% tumor suppression rate. Notably, MOGel+RT elicited an enhanced abscopal effect, with hypoxia relief and enhanced DC activation contributing to systemic immune responses. These findings suggest that OM-based oxygen gels offer a novel strategy to enhance systemic immune responses to RT.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202507021
The accumulation of heavy metals in soil around municipal solid waste landfills poses potential risks to human health. This study selected a municipal solid waste landfill and monitored the concentrations of eight heavy metals (Zn, Pb, Cd, Ni, Hg, Cu, As, Cr) in surrounding soil. The geo-accumulation index method was used for pollution assessment, and a health risk assessment model recommended by the USEPA, combined with Monte Carlo uncertainty analysis, was employed to evaluate the pollution status and health risks to nearby residents. Results showed that among the eight metals, Pb, Ni, and Cd exceeded risk screening values at 4.26%, 6.38%, and 4.26% of sampling points, respectively. Geo-accumulation indices indicated overall clean conditions (mean < 0), but slight pollution by Pb, Zn, Ni, Hg, and Cd at some points. Probabilistic risk assessment based on Monte Carlo simulation revealed that for both adults and children, the cumulative non-carcinogenic risk was negligible, while carcinogenic risk was acceptable. However, there was a very low probability (approximately 0.2%) of non-carcinogenic risk for children, and probabilities of unacceptable carcinogenic risk were 0.64% for adults and 3.21% for children. Nickel was the primary contributor to carcinogenic risk, and children faced higher health risks than adults. These findings provide a reference for pollution prevention and health risk management of soil around municipal solid waste landfills.
New Carbon Materials•2026•DOI: 10.1016/S1872-5805(26)61101-8
Phenolic compounds are typical refractory organic pollutants in coal chemical coking wastewater, posing significant risks to ecosystems and human health. Conventional treatment methods are inefficient, necessitating advanced oxidation processes (AOPs). Here, we report a low-cost Fe/N–C catalyst synthesized from coal-tar pitch, a common by-product of the coal chemical industry, via a self-assembly and pyrolysis strategy using graphitic carbon nitride (g-C3N4) as a template and nitrogen source, with dicyandiamide as an auxiliary nitrogen source and FeCl3·6H2O as the iron precursor. The resulting nitrogen-doped carbon nanosheets possess abundant defects (sp3-C/sp2-C = 0.66) and atomically dispersed iron species. The Fe/N–C catalyst exhibits outstanding catalytic activity for peroxydisulfate (PDS) activation, achieving over 98% phenol degradation within 30 minutes and a 60% total organic carbon (TOC) removal rate. Mechanistic studies, including radical quenching and electron paramagnetic resonance (EPR) experiments, reveal that both radical and non-radical pathways contribute to phenol degradation, with singlet oxygen (1O2) as the primary reactive oxygen species. Electrochemical analyses demonstrate that atomically dispersed Fe sites significantly enhance interfacial electron transfer. Post-reaction characterization indicates the consumption of pyrrolic-N, C=O, and carbon defects as active sites, while graphitic-N and Fe–N structures remain stable, confirming the catalyst's stability. This work provides an economical route to convert coal-tar pitch into high-performance catalytic materials for efficient water treatment, embodying the circular economy concept of waste-to-resource utilization.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202509051
Recyclables constitute a significant fraction of municipal solid waste (MSW) and hold substantial potential for resource utilization and greenhouse gas (GHG) emission reduction, contributing to carbon peak and carbon neutrality goals. However, reported GHG emission factors (EFs) for various recyclables vary widely across databases and literature, ranging from -19,110 to -125 kgCO2-eq·t⁻¹, with significant differences both among categories and within the same category, complicating accurate accounting. This study systematically integrates literature data on EFs for different recyclable categories, focusing on identifying factors causing intra-category variability. Data were collected from global databases (ecoinvent, WARM, CPCD, NAEI) and peer-reviewed studies over the past two decades, normalized to a functional unit of 1 tonne of recyclable. Statistical analysis (mean ± standard deviation) provided reference ranges for each category. Results show paper recyclables EFs range from -3,140 to 270 kgCO2-eq·t⁻¹, with corrugated cardboard and writing paper exhibiting higher absolute values than packaging paper due to structural strength and resource value. Plastic recyclables EFs range from -3,096 to -566 kgCO2-eq·t⁻¹, with EPS showing the highest reduction potential, followed by PET and PVC, then HDPE, LDPE, PP, and other plastics. Key influencing factors include functional unit definition, accounting scenario, system boundary, electricity emission factor selection, and calculation assumptions. The study recommends selecting EFs matching the specific accounting scenario and performing error analysis. Data gaps remain for LDPE, EPS, and other plastics, necessitating further experimental or field data. To enhance accuracy, calibration methods such as process-level and life-cycle inventory data calibration are proposed. This work provides a scientific basis for EF selection and calibration in GHG accounting of recyclables.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202606014
Microplastics, as emerging environmental pollutants, can adsorb psychotropic drugs in aquatic environments, facilitating their migration and transformation, ultimately posing ecological risks. This study investigated the adsorption behavior and mechanisms of four common microplastics—polyethylene (PE), polypropylene (PP), polystyrene (PS), and polyvinyl chloride (PVC)—each with a particle size of 50 μm, toward three psychoactive drugs: diazepam, fluoxetine, and mianserin. Adsorption kinetics, isotherms, and the effects of pH and salinity were examined. Kinetic data fitted well to a pseudo-second-order model, indicating chemisorption as the rate-limiting step. Isotherm analysis using Langmuir and Freundlich models revealed that PE exhibited the highest affinity for fluoxetine, PP for mianserin, and PVC for diazepam, while PS showed linear adsorption for fluoxetine, suggesting partitioning. The adsorption of diazepam was maximal at pH 6.5–8.5, typical of natural surface waters, and increased with NaCl concentration, indicating that non-electrostatic interactions dominate and that higher ionic strength enhances adsorption. Mechanistic insights suggest that hydrophobic interactions, hydrogen bonding, π-π interactions (for PS), and halogen bonding (for fluoxetine) contribute to adsorption. These findings highlight the potential of microplastics to act as vectors for psychoactive drugs, necessitating further research on their environmental fate and ecological implications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3823-4
The global demand for chlorine gas continues to rise, driven by its indispensable role in chemical synthesis, disinfection, and wastewater treatment. Electrocatalytic chlorine evolution from seawater presents a promising alternative to the energy-intensive chlor-alkali process, yet it is hampered by the competing oxygen evolution reaction and the sluggish kinetics of chlorine evolution on conventional catalysts. Here, we report a novel hollow porous CoNiSe2/NiSe2 heterostructure nanosheet array synthesized via ion exchange and calcination, which exhibits exceptional catalytic activity and selectivity for the chlorine evolution reaction in acidic seawater-like electrolytes. The unique hollow porous morphology provides a high specific surface area, facilitating mass transport and exposing abundant active sites. Crucially, the heterointerface between CoNiSe2 and NiSe2 promotes d-p orbital hybridization between Co/Ni 3d and Se 4p states, which lowers the reaction energy barrier for chlorine evolution. The catalyst achieves a low overpotential of 108 mV to reach a current density of 100 mA cm−2 in 4.0 M NaCl acidic medium, with excellent stability and Cl2 selectivity. This work demonstrates the potential of non-noble metal selenides as efficient and durable catalysts for chlorine production, offering a pathway toward more sustainable chlor-alkali technology.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4116-0
The design of solid electrolyte interphases (SEIs) for poly(vinylidene fluoride)-based solid-state batteries has largely focused on solvent-affinity of Li+ to generate robust but ionically sluggish LiF-rich layers, inherently compromising transport kinetics. Here, we establish a paradigm based on quantifiable physicochemical descriptors (ionic potential and donor number) to guide the design of amphitropic ion pairs (AIPs). These AIPs are engineered to simultaneously tailor both the solvent-affinity and anion-affinity of Li+: a solvent-philic cation with high ionic potential (Al3+) first sequesters reactive solvents, clearing the path for a high-donor-number, lithium-philic anion (NO3−) to remodel solvation. This rationally guided, sequential mechanism enables the in situ synthesis of a LiF/Li3N heterostructured SEI, where dendrite-suppressing LiF domains are seamlessly integrated with ultra-fast Li3N ion channels. This design heterogeneity effectively enhances stability and kinetics, yielding a robust and highly conductive interface. Consequently, Li|Li cells achieve >2000 h of stable cycling, and Li|LiNi0.8Co0.1Mn0.1O2 full cells surpass 600 cycles.
SCIENCE CHINA Materials•2025•DOI: 10.1007/s40843-025-3551-5
Flexible photonic crystal (PC) materials exhibit exceptional optical properties but suffer structural degradation under repeated mechanical stress, leading to photonic band gap impairment and limited sustainability. This study introduces a self-healing thermoplastic polyurethane (STPU) with an inverse-opal PC structure, inspired by natural structural coloration and self-healing mechanisms. Synergistic dynamic covalent disulfide bonds and hydrogen bonds enable reversible mechanical adjustment, yielding a tensile strength of 26.76 MPa and elongation at break of 2000%. The inverse opal structure facilitates reversible color transitions in response to solvents (water, ethanol) and mechanical strain (0–70%) via lattice spacing modulation. Incorporating an interpenetrating network of polyacrylamide hydrogel and carbon nanotubes enhances strain sensitivity and structural color stability. The material demonstrates broad potential in flexible sensors, adaptive optical devices, bioinspired robotic skins, and dynamic anti-counterfeiting encryption, overcoming traditional PC limitations such as high fragility and single functionality. This strategy advances durable intelligent sensing materials with enhanced environmental adaptability and multifunctional integration.