SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3630-2
This study demonstrates a dual-interface engineering approach for performance enhancement in perovskite-silicon tandem solar cells. By applying ethylenediamine dihydroiodide (EDAI2) to simultaneously modify both top and bottom interfaces of wide-bandgap perovskite layers, we achieve synergistic defect suppression and charge transport optimization. Time-resolved photoluminescence characterization reveals extended carrier lifetimes and improved spatial homogeneity in dual-modified perovskite films. The optimized single-junction wide-bandgap (>1.66 eV) perovskite solar cells attain a champion efficiency of 22.75% with enhanced operational stability. Implemented in perovskite-silicon tandem configuration, the devices achieve over 31% power conversion efficiency, validating the effectiveness of organic ligand-mediated dual-interface engineering in regulating carrier dynamics and advancing perovskite-based tandem photovoltaics.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2024122402
Carbamazepine (CBZ), a typical emerging contaminant, poses significant environmental and health risks due to its frequent detection, high toxicity, and resistance to conventional degradation. This study synthesized a composite material (PH-BC3-600) via high-temperature pyrolysis of mining waste pyrite and discarded Polygonatum kingianum dregs biochar. The composite was employed to activate peroxymonosulfate (PMS) for CBZ degradation. Results demonstrated that biochar incorporation provided pyrite with more active sites, achieving 88.19% removal of 2.5 mg·L−1 CBZ within 5 minutes, with excellent resistance to Cl−, NO3−, and humic acid. Quenching experiments confirmed the involvement of ·OH, SO4·−, 1O2, and e− in the degradation process. The biochar increased the content of highly reductive sulfur species (S2−, S2−2, Sn2−) in PH-BC3-600, facilitating the reduction of Fe(III) to Fe(II) and thereby enhancing PMS activation. Additionally, PH-BC3-600 exhibited lower iron leaching compared to traditional pyrite-based materials, overcoming a key drawback of conventional catalysts. This study highlights the promising potential of PH-BC3-600 for activating PMS in the treatment of emerging contaminants in water.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2024112106
Selective synergistic catalytic elimination (SSCE) of CH3SH and CO2 represents a significant approach towards achieving green chemistry objectives. In this study, a series of Al2O3 catalysts with different surface hydroxyl coordination states were designed and fabricated through a simple water bath strategy. The performance of the corresponding catalysts for selective synergistic catalytic elimination of CH3SH and CO2 was systematically evaluated. The catalysts were comprehensively characterized by BET, XRD, XPS, NMR and CO-DRIFTS techniques. The experimental results revealed that the synthesized samples exhibited uniform specific surface areas (150 m2·g−1) and pore sizes (12 nm), while demonstrating varying hydroxyl coordination states, which significantly affects the surface acidity of W-Al2O3 catalyst. Notably, W80-Al2O3, synthesized at 80 °C via water bath heating, displayed the highest proportion of μ1-type hydroxyl coordination. This unique structural feature endowed the catalyst with enhanced Brønsted acidity and superior CO adsorption capacity compared to other catalysts, which significantly promotes the further hydrogenation of CO to CH4 in the SSCE process. As a result, the SSCE performance of W80-Al2O3 was significantly improved, achieving complete conversion of CH3SH (100%) and a CH4 product concentration of 1326 μmol·g−1, which is significantly higher than that of Al2O3 (56 μmol·g−1) and W-Al2O3 (54 μmol·g−1). This work provides a new strategy for the synergistic reduction of typical sulfur-containing odorous pollutants and carbon dioxide.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4079-4
Utilization of ultrahigh-nickel LiNi_xCo_yMn_1-x-yO_2 (NCM) (x > 0.97) in Li-ion batteries can distinctively boost energy density through enhanced discharge capacity. However, capacity and thermal stability deteriorate as Ni content approaches the limit. Here, we propose a facile strategy by introducing high-valence tungsten (W) into ultrahigh-nickel polycrystalline LiNi_0.98Co_0.01Mn_0.01O_2 (PCNCM98). W-doped PCNCM98 (W-PCNCM98) exhibits refined, compactly stacked primary particles, whereas PCNCM98 shows equiaxial, non-uniform larger particles. The refined microstructure enhances mechanical strength: average particle hardness of W-PCNCM98 is 104 MPa, 1.5 times higher than PCNCM98 (68 MPa). This improved mechanical property suppresses lattice volume changes and relieves microcrack formation from H2–H3 phase transition. Consequently, cycling performance in pouch-type full cells is significantly enhanced, with capacity retention of 73% after 2000 cycles at 1 C and 25 °C, 54% higher than PCNCM98. Enhanced structural stability and strong electron affinity of W6+ also improve thermal stability: exothermic peak for W-PCNCM98 is postponed to 203 °C with heat generation of 1287 J g−1, versus 190 °C and 1528 J g−1 for PCNCM98. This high-valent doping strategy stabilizes ultrahigh-nickel NCM cathodes, accelerating large-scale EV applications.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202510044
The efficient treatment of sulfur-containing volatile organic compounds (S-VOCs) has become a critical task for air pollution control and green low-carbon transition under China's 14th Five-Year Plan. Industrial emissions often contain multiple S-VOC species, whose interactions can complicate degradation pathways, generate uncontrollable byproducts, and deactivate catalysts, limiting practical application. This review systematically summarizes the past decade of research on catalytic degradation of thiols and thioethers in multi-pollutant systems, focusing on competitive adsorption mechanisms, interfacial reaction pathways, and environmental factor regulation. Performance differences and reaction mechanisms across various catalyst systems under coexisting S-VOCs and inorganic sulfur are compared. Key findings indicate that mixed thiol systems exhibit faster deactivation than single-component systems due to temperature-dependent competitive adsorption and pathway switching, governed by molecular size–active site matching. Strategies such as metal–support strong interactions, zeolite confinement, nanocluster effects, and single-atom catalysts have improved activity and stability. However, dynamic competition mechanisms at active sites remain unresolved. Future research should develop atomic/molecular-level characterization techniques and multi-variable kinetic models, and shift from end-of-pipe purification to resource recovery, e.g., converting H2S and thiols into high-value chemicals like methanethiol, achieving dual goals of pollution control and sulfur resource recycling.