SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4337-2
Silica aerogels are recognized as leading super-insulating materials due to their ultralow thermal conductivity, yet their intrinsic brittleness and poor processability restrict practical deployment in complex industrial and extreme environments. This study introduces a macro-scale 'stiff–soft' synergistic strategy, combining a macroscopically processable, soft-and-tough framework as the load-bearing component with hard-and-brittle polymethylsilsesquioxane (PMSQ) aerogels as the insulating component. A pressure-driven assembly process enables viscosity-tunable PMSQ gel inks to be controllably infused into various hollow frameworks, including honeycomb panels, wheat straws, and hollow fibers. Guided by a modified Hagen–Poiseuille model, ink viscosity is precisely matched to the geometric parameters of the hollow structures. The resulting composites achieve compressive strength of 2.5 MPa, flexural strength of 6.25 MPa, and tensile strength of 40 MPa, while maintaining excellent thermal insulation. This versatile and scalable approach offers a new design paradigm for mechanically adaptive silica aerogel composites in thermal management applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3660-5
High-sensitivity piezoelectric ceramics with high piezoelectric constants (d33) are crucial for miniaturized, low-power, and high-efficiency transducers. However, conventional performance enhancement relies on intrinsic parameter modulation, which is limited and blind. This study introduces a performance-driven metamaterials creation model to develop structure-function-integrated piezoelectric materials. We systematically investigated the effects of metastructure design on d33 across two-dimensional straight rod (SR) structures, three-dimensional dot-matrix (Octa) structures, complex triply periodic minimal surface (TPMS) structures, and hybrid Octa&SR structures. The results demonstrate that metastructures combining high polarization charge conversion efficiency with low compression modulus (stiffness) effectively enhance d33. The SR structure exhibited optimal polarization charge conversion, the Fks-Shellular (FksS) structure within TPMS showed low stiffness, and the Octa&SR structure combined both properties. Notably, all three structures displayed exceptional piezoelectric performance. Specifically, the FksS structure achieved a substantial d33 of 194 pC/N, a 24% enhancement over conventional solid BaTiO3, while maintaining isotropic and stress-insensitive properties. This work elucidates the mechanism for designing piezoelectric metastructures, offering a novel pathway for developing high-performance, high-failure-strength piezoelectric materials.
New Carbon Materials•2026•DOI: 10.1016/S1872-5805(25)61036-5
Large graphene oxide (LGO) sheets offer significant advantages over smaller ones in various applications, yet their production via Hummers-type oxidation of large natural graphite flakes remains challenging due to difficulties in achieving full oxidation and avoiding fragmentation. This study provides the first direct evidence that large graphite flakes (up to 1 mm) can be completely oxidized without fragmentation under static conditions, as revealed by in-situ monitoring. The oxidation process is governed by diffusion of the oxidizer between layers, described by Fick's law, where a high oxidizer concentration gradient increases the diffusion rate. By minimizing the amount of concentrated H2SO4 solvent, we achieved a semi-solid state that elevates oxidizer concentration, facilitating Mn(VII) diffusion and enabling complete oxidation of gram-scale large flakes with significantly reduced reagent consumption. Reaction temperature was optimized to balance graphite oxidation and Mn(VII) self-decomposition. Using this approach, 200-, 100-, and 50-mesh natural graphite were fully oxidized with reduced H2SO4 and KMnO4 usage. After exfoliation, LGO with average lateral sizes of 27.3, 58.7, and 116.2 μm were obtained, respectively, with 100% conversion and yield over 165%. This work not only provides a scalable, cost-effective strategy for LGO production but also advances the fundamental understanding of Hummers-type oxidation.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3760-y
Layered chalcogenide compounds have attracted considerable attention for optoelectronic applications due to their rich structural diversity and unique physical properties, including high carrier mobility, ferromagnetism, ferroelectricity, and outstanding optoelectronic and thermoelectric performance. Their tunable bandgaps and strong light absorption render them highly suitable for next-generation photodetectors. However, the environmental instability of many 2D chalcogenides poses a critical challenge for practical applications. In this work, we report a high-performance, polarization-sensitive photodetector based on an air-stable ternary chalcogenide FeIn2Se4. Angle-resolved polarized Raman spectroscopy reveals that the four characteristic Raman modes exhibit a 60° periodic variation in intensity, highlighting the material's pronounced in-plane anisotropy. Benefiting from its strong absorption over a broad spectral range (510–1028 nm), the FeIn2Se4-based device demonstrates reliable photoresponse under multiple excitation wavelengths (405, 473, 515, and 638 nm), showcasing its wideband detection capabilities. Furthermore, XPS measurements after prolonged air exposure confirm the enhanced chemical stability of FeIn2Se4 compared to binary chalcogenides. These findings demonstrate that 2D ternary FeIn2Se4 is an excellent candidate for advanced anisotropic optoelectronic devices, offering broadband photodetection, robust polarization sensitivity, and excellent environmental resilience.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025020603
The high cellulase-producing strains were screened and the enzyme production conditions were optimized, providing strain resources for the effective utilization of agricultural solid waste. A promising cellulolytic strain S3 was isolated from the soil of Hengshui Lake Wetland Park. The isolation process employed Congo red plate staining method for primary screening, followed by secondary screening through cellulase activity determination and straw degradation experiments. Through morphological observation and molecular biology identification, the strain S3 was identified to be Bacillus cereus. The ratio of transparent circle to colony diameter of strain S3 was 4.01±0.17. The filter paper enzyme activity of strain S3 was 42.09 U·mL−1, and the degradation rate of corn stover reached 19.29% after 10 days of fermentation. It was found that the optimum carbon source of strain S3 was the mixture of microcrystalline cellulose and wheat bran with the addition amount of 4%, and the optimum nitrogen source was soybean powder with the addition amount of 2%. Single factor experiment and response surface methodology were used to optimize the enzyme production conditions of the strain S3. The optimal conditions were fermentation time of 76 h, fermentation temperature of 36℃, initial pH of 6, and inoculation volume of 4%. Under these conditions, the filter paper enzyme activity reached 60.13 U·mL−1, which was 1.43 times higher than that before optimization. The strain S3 showed the high cellulase-producing capability, demonstrating its potential as an efficient microbial candidate for the degradation and utilization of agricultural solid waste.
Environmental Chemistry•2026•DOI: 10.0000/202605-1
A method for the determination of hydrazoic acid and sodium azide in workplace air was established using ion chromatography with suppressed conductivity detection. Vapor and mist states of hydrazoic acid were collected in 40 mg·L−1 KOH absorption solution, while sol states of hydrazoic acid or sodium azide were collected on microporous membranes and eluted with 40 mg·L−1 KOH. Separation was performed on a Dionex IonPac™ AS11-HC (250 mm × 4.0 mm) anion analytical column with KOH gradient elution, followed by suppressed conductivity detection. The azide ion (N3−) exhibited good linearity in the range of 0.005–0.5 mg·L−1, with a correlation coefficient (r) of 0.9997. The limit of detection (S/N=3) was 0.002 mg·L−1, and the limit of quantification (S/N=10) was 0.005 mg·L−1. The minimum quantifiable concentrations in air were 0.00256 mg·m−3 for hydrazoic acid and 0.00387 mg·m−3 for sodium azide, based on a 10.0 mL sample solution and a 20 L air sample. Spiked recoveries ranged from 92.0% to 100.4%, with relative standard deviations (RSD, n=6) between 0.76% and 2.51%. The method is efficient, accurate, and sensitive, suitable for monitoring and safety assessment of hydrazoic acid and sodium azide in workplace air.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3717-6
Poly(ethylene oxide) (PEO)-based all-solid-state polymer electrolytes (SPEs) hold significant promise for high-specific-energy and high-safety Li batteries, yet suffer from poor mechanical robustness and low Li+-conducting efficiency. Aramid nanofibers (ANFs), with exceptional mechanical strength and abundant intramolecular/intermolecular interactions, are effective additives, but their strictly symmetric interchain interactions generate a highly ordered hydrogen-bond network, producing inert aggregates that compromise electrolyte stability. Here, we construct a poly(ethylene glycol) (PEG)-mediated asymmetric interaction between ANF chains. PEG chains introduce weaker H-bonding acceptor sites, higher steric hindrance, and abundant lithiophilic groups, simultaneously disrupting strong symmetric ANF-ANF interactions and creating rapid Li-ion channels. The resulting electrolyte maintains excellent mechanical properties (yield stress of 3.25 MPa) and enables stable cycling of Li||Li symmetric cells for over 1600 h with low polarization voltage. In LCO||Li cells, the electrolyte achieves a capacity retention of 82.7% after 300 cycles at 1 C, markedly higher than the unmodified counterpart (35.5%). This synergistic optimization of interfacial compatibility and mechanical performance demonstrates a practical route toward safe, high-energy-density all-solid-state polymer batteries.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60652-4
The performance of industrial zeolite catalysts, exemplified by fluid catalytic cracking (FCC) catalysts, is governed by microscopic behaviors including mass transfer, acidity, and coking. Conventional characterization techniques such as XRD, N2 physisorption, and TPD provide bulk-averaged or static ex situ information, failing to resolve dynamic processes under realistic reaction conditions. Recent advances in super-resolution fluorescence imaging enable nanoscale visualization of these key processes. This review systematically summarizes three critical applications: (1) Mass transfer diffusion: heterogeneous diffusion of reactant molecules within hierarchical pore networks is revealed, quantifying diffusion barriers and tortuosity. (2) Acid site accessibility: nanoscale localization of acid sites and their accessibility is achieved, correlating with catalytic activity. (3) Coking behavior: spatiotemporal evolution of coke species is identified, linking coke precursors to deactivation. The review elaborates how super-resolution imaging deepens understanding of fundamental catalytic mechanisms, providing theoretical support for rational design of high-performance catalysts through pore structure optimization, acid site regulation, and coking suppression. Current challenges and future directions are discussed, emphasizing the need for in situ correlation with catalytic performance.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025032601
This study investigated the pollution characteristics of chlorate and perchlorate in tea from Anhui region and assessed the health risks associated with tea consumption. A total of 132 tea samples, including green tea (n=89), black tea (n=30), yellow tea (n=10), and white tea (n=3), were collected from major tea-producing areas. Chlorate and perchlorate levels were quantified using isotope dilution liquid chromatography-tandem mass spectrometry. Chlorate was detected in 15.9% of samples, with concentrations ranging from not detected to 0.040 mg·kg−1, and no samples exceeded the regulatory limit. Perchlorate was detected in 100% of samples, with concentrations ranging from 0.011 to 1.611 mg·kg−1, and 2.3% of samples exceeded the limit. Pollution characteristics analysis revealed that perchlorate levels were significantly correlated with tea type and geographical origin, with environmental contamination in tea-growing areas being the primary determinant. A significant positive correlation was also observed between chlorate and perchlorate levels. Health risk assessments were conducted for the general tea-consuming population, sub-groups loyal to specific tea types (green and black tea), and sub-groups preferring local tea from high-pollution regions (Lu'an City and central Anhui). Assessments were based on mean and 95th percentile (P95) exposure levels. For chlorate, the maximum hazard quotient (HQ) was 0.003, far below 1, indicating negligible risk. For perchlorate, all HQ values were below 1, regardless of tea type or region, based on both mean and P95 levels, using the Chinese provisional tolerable daily intake (tTDI). However, perchlorate contamination in central Anhui, particularly Lu'an City, warrants continued monitoring due to elevated levels and occasional exceedances.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025032401
Diazepam (DZP), a benzodiazepine anxiolytic drug, has been a persistent contaminant in fishery water environments. In China, DZP is classified as a veterinary drug that must not be detected in animal-derived foods, yet it is frequently found in aquatic products, posing significant risks to ecological health and food safety. This review systematically summarizes the current pollution status of DZP in fishery water and its adverse effects on aquatic organisms, emphasizing its persistence in both water and aquatic products. The paper comprehensively examines advances in detection techniques, including gas chromatography-mass spectrometry (GC-MS) and liquid chromatography-tandem mass spectrometry (LC-MS/MS), as well as treatment technologies such as adsorption, photolysis, chemical oxidation, and biodegradation. Critical gaps remain in the integration of these technologies for practical remediation. The review underscores the urgent need for enhanced monitoring and risk assessment of DZP contamination, alongside the development of more efficient and scalable treatment methods. By consolidating current knowledge, this work provides technical support for aquatic organism protection and fishery water management, and serves as a reference for future research and technological innovation in this field.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3950-x
Photocatalytic oxygen reduction reaction (ORR) for hydrogen peroxide (H2O2) production via the two-electron pathway offers an environmentally friendly oxidant and a clean fuel. However, challenges exist in optimal oxygen (O2) adsorption capacities and maintaining O–O bond during O2 activation. Herein, we present a zinc single-atom catalyst (Zn/VN-CN) incorporating nitrogen vacancies (VN), designed to modulate the electronic structure of the photocatalyst, leading to optimized O2 adsorption energy and a remarkable enhancement in H2O2 yield. Benefiting from the synergistic effect between nitrogen vacancies and Zn single atoms, the optimized Zn/VN-CN catalyst exhibits a photocatalytic H2O2 production rate of 2.399 mmol g−1 h−1 under visible-light irradiation, representing a 12-fold enhancement compared to pristine g-C3N4 (CN), along with a high H2O2 selectivity of 87.4%. Combined experimental and theoretical studies indicate that the Zn-N3 sites act as highly active reaction centers, while nitrogen vacancies increase the charge density and downshift the d-band center of the Zn sites, thereby moderating O2 adsorption strength, lowering the activation energy barrier for the formation of *H2O2, and further converting it to H2O2. This work proposes an effective strategy for tuning O2 adsorption behavior to achieve highly selective and active photocatalytic H2O2 production.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2026031103
Sintering ash washing wastewater from steel plants is characterized by high salinity, high chloride content, high thallium load, and coexistence of multiple metals, posing significant treatment challenges. This study employed thermodynamic simulation to elucidate the speciation and transformation of thallium in such wastewater, and systematically investigated a combined process of sulfide precipitation coupled with coagulation-flocculation. The results showed that at pH 9–10, thallium predominantly existed as Tl+. Under oxidizing conditions, the stable complex anion [TlCl4]− dominated at pH < 8.1, while at pH > 8.1, a mixed system of solid Tl2O3 and dissolved TlClO3 coexisted. Under optimized conditions (pH 12, 2.0% thallium removal agent, 1.0% multi-effect auxiliary agent), the thallium concentration in the wastewater decreased from an initial 9.58 mg·L−1 to 4.31 μg·L−1, meeting the stringent discharge limit of ≤5 μg·L−1. Concurrent removal of Cu, Zn, and Cd was achieved. The primary removal mechanism was sulfide precipitation, with lattice substitution between Tl+ and K+ serving as an auxiliary pathway. This study provides a practicable technical route for advanced treatment of high-chloride, high-thallium industrial wastewater.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025051404
Rubber additives, such as 1,3-diphenylguanidine (DPG) and p-phenylenediamine antioxidants (PPDs), are widely used in the rubber industry and have been increasingly detected in aquatic environments. This study investigated the distribution characteristics and potential sources of seven typical rubber additives (DPG, 6PPD, IPPD, DPPD, CPPD, DNPD, and 77PD) and the transformation product 6PPD-Q in surface water of the Guangzhou section of the Pearl River, China. A total of 29 sampling sites were analyzed. Total concentrations of the target compounds ranged from 205 to 5400 ng·L−1, with a mean of (820±1100) ng·L−1. DPG was the dominant compound in both dissolved and particle phases, accounting for (99±1.9)% and (66±13)% of the total concentrations, respectively. Source analysis indicated that aquaculture, vessel navigation, agricultural runoff, and wastewater treatment plant discharges likely influence the occurrence of rubber additives in this river section. Risk quotient (RQ) assessment revealed that 6PPD-Q posed high ecological risk at all sampling sites (RQ > 1), while DPG exhibited moderate to high risk at most sites (RQ > 0.1). In contrast, 6PPD, IPPD, CPPD, and DPPD showed low ecological risk. These findings highlight the need for heightened attention to the ecological risks posed by 6PPD-Q and DPG in the Pearl River Basin and provide scientific data for pollution prevention and risk management.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202608026
Biochar and microbial inoculants are widely used for agricultural soil amendment. To investigate the effects of different straw biochars and Bacillus subtilis inoculant, applied individually or combined, on nitrogen transformation in dryland soil, a 60-day laboratory incubation experiment was conducted with six treatments: control (CK), 4% rice straw biochar (S), 4% rapeseed straw biochar (Y), 4% rice straw biochar plus 5 mg/kg inoculant (SJ), 4% rapeseed straw biochar plus 5 mg/kg inoculant (YJ), and inoculant alone (J). Results showed that rice straw biochar significantly increased soil nitrate nitrogen content by 148.74%–152.68% compared to CK, enhancing nitrification. Combined application with inoculant further increased average net nitrogen mineralization rate by 77.28%–99.38%. Conversely, rapeseed straw biochar decreased nitrate nitrogen by 51.66%–57.61%, and combined application reduced net nitrogen mineralization rate by 82.07%–84.73%. Treatments S, Y, SJ, and YJ promoted microbial biomass nitrogen (MBN) synthesis, with S and Y increasing MBN by 2.02- and 2.20-fold over CK, respectively. Combined treatments further increased MBN by 103.26%–149.44% relative to single biochar treatments. These findings indicate that biochar type governs nitrification and net nitrogen mineralization, while combined application exerts synergistic effects on MBN. For comprehensive dryland soil improvement, YJ treatment is optimal, reducing inorganic nitrogen loss risk and enhancing microbial nitrogen activity.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4008-2
Lung cancer, particularly non-small cell lung cancer (NSCLC), remains a leading cause of cancer-related mortality, with conventional therapies hampered by poor tumor specificity, low drug accumulation, and suboptimal efficacy. To address these challenges, we rationally designed a tumor-targeted, ferrocene-bearing, covalently immobilizable theranostic probe, dIR-CDF, for near-infrared (NIR) imaging-guided photodynamic-ferroptosis synergistic therapy. The probe exploits the overexpression of sulfenated proteins in the tumor microenvironment to specifically target integrin αvβ3-positive NSCLC cells and undergo covalent anchoring via the reaction between 1,3-cyclohexanedione and sulfenic acid, thereby enhancing tumor accumulation and retention. Under 808 nm irradiation, dIR-CDF generates singlet oxygen (1O2) for photodynamic therapy (PDT), while the sustained release of ferrocene catalyzes Fenton reactions to produce hydroxyl radicals (·OH), inducing ferroptosis. The synergistic action of PDT and ferroptosis amplifies lipid peroxidation and disrupts antioxidant defenses, leading to efficient suppression of NSCLC tumors in living mice. This work presents a universal and powerful theranostic platform for precise cancer diagnosis and treatment, with the covalent targeting strategy offering enhanced specificity and retention.