SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4183-3
Excessive ultraviolet (UV) radiation poses significant risks to human health, necessitating highly sensitive detection systems. Organic photodetectors (OPDs) offer high sensitivity and tunable spectral response, but their UV performance is constrained by conventional glass/indium tin oxide (ITO) substrates and electrodes, and insufficient photoactive layer responsivity. Here, we report high-performance UV-OPDs achieved through UV-transparent window and active-layer optimization. Replacing glass/ITO with a UV-transparent window comprising a quartz substrate and PH1000 electrode enhances UV transmittance. Integrating the high UV-responsive blend PM6:Y6:PC71BM as the active layer, the optimal ternary UV-OPD exhibits external quantum efficiency (EQE) exceeding 53% across 280–400 nm, with a peak EQE of 78.29% and responsivity of 214.68 mA/W at 340 nm, alongside a rapid response time of 2.6/2.1 μs. This performance represents the best combination of responsivity and response time reported to date in the UV region. We demonstrate the potential of these UV-OPDs for outdoor real-time UV monitoring. This work presents a promising strategy for developing high-performance UV-OPDs through transparent substrate and electrode engineering, and active-layer optimization.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3943-y
Biodegradable polymers are promising for bioelectronic materials, yet simultaneously improving their mechanical, electrical, and optical performance remains a major challenge. Poly(3-hydroxybutyrate-co-4-hydroxyvalerate) (P34HB), a microbially synthesized polyhydroxyalkanoate (PHA), exhibits excellent biocompatibility and degradability but suffers from poor chain length control, limiting its functional performance. Here, we report a low-temperature, non-destructive supercritical ethyl alcohol-assisted polymerization (SEAP) strategy to enhance P34HB at the molecular level. Operating at 40 °C and 1500 psi, SEAP combines the permeability of supercritical CO2 with ethanol-mediated catalysis to promote in situ dehydration polymerization and efficiently remove impurities. Post-treatment, P34HB exhibits a 16% increase in number-average molecular weight, along with a record-high Young's modulus of 51.08 GPa and a 144% increase in elongation at break, overcoming the conventional trade-off between stiffness and ductility. Optical performance is also improved, with transmittance rising by 44% and refractive index increasing to 1.2. Material analyses confirm a higher ester group density and reduction of residual impurities. Electrical insulation is notably enhanced, with leakage current reduced by 50% to below 1 pA and reduced dielectric loss to 0.06. Cytotoxicity assays further verify excellent biocompatibility. This work establishes SEAP as a sustainable strategy for functionalizing P34HB, enabling its deployment in next-generation bioelectronics and flexible electronics.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60659-7
Coal gasification fine slag (CGFS), a solid waste from entrained-flow coal gasification, is characterized by fine particles and high silicon and aluminum content. This study proposes a simple and economical hydrothermal synthesis of ZSM-5 molecular sieve using CGFS as raw material. Impurities were removed by acid washing, followed by alkaline extraction of silicon and aluminum species. The extracted Si-Al precursors were crystallized hydrothermally at 170 °C for 48 h, yielding ZSM-5 with a high specific surface area of 358 m2/g. Adsorption experiments showed that the synthesized ZSM-5 exhibited excellent Pb2+ removal performance: at 25 °C, the removal efficiency for a 50 mg/L Pb2+ solution reached 83.7%, with an adsorption capacity of 104.625 mg/g under optimized conditions. The adsorption process is mainly governed by chemisorption mechanisms, including surface complexation, precipitation, and ion exchange. Thermodynamic analyses indicated that Pb2+ adsorption is spontaneous and endothermic, consistent with multilayer chemisorption. The synthesized ZSM-5 shows promising potential for application in the treatment of lead-containing wastewater, offering a high-value utilization route for coal-based solid waste.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202607014
Reducing ammonia emissions and recovering lost nitrogen are critical for enhancing nitrogen content in compost. Biological trickling filters, as end-of-pipe odor control, retain ammonia nitrogen in effluent, offering a reuse pathway. However, the impact of nitrogen-rich wastewater reuse within the optimal C/N range (20.0:1–30.0:1) remains unclear. This study composted biogas residue, sawdust, food waste, and mushroom residue, setting initial C/N as the control variable. Four groups were established: low C/N with nitrogen-rich wastewater (LRN), low C/N with deionized water (LRW), high C/N with nitrogen-rich wastewater (HRN), and high C/N with deionized water (HRW). Simulated wastewater (2000 mg/L NH4+-N and 2000 mg/L NO2−-N) was recycled. Results showed no inhibition of final maturity; pH (8.17–8.48) and seed germination index (GI) (90.85%–122.96%) met organic fertilizer standards. HRN reduced cumulative total greenhouse gases, N2O, and NH3 by 20.32%–30.35%, 0.67%–53.38%, and 52.14%–62.15% compared to LRN and LRW. Although HRN emissions were slightly higher than HRW (total GHGs +4.56%, NH3 +4.99%), HRN final nitrogen content (4691.27 mg/kg) exceeded HRW (4514.96 mg/kg), attributed to sufficient carbon enhancing microbial assimilation. Conversely, low C/N with nitrogen-rich wastewater increased NH3 and N2O emissions (LRN vs LRW: +26.43% and +112.99%) due to carbon limitation. Thus, high initial C/N with nitrogen-rich wastewater reuse effectively reduces gaseous nitrogen loss and greenhouse gas emissions while maintaining compost maturity.
SCIENCE CHINA Materials•2025•DOI: 10.1007/s40843-025-3366-9
Organic solar cells (OSCs) have transitioned from <1% initial power conversion efficiency (PCE) to a benchmark exceeding 20% in single-junction and tandem architectures, marking a critical milestone for solution-processable photovoltaics. This review consolidates recent reports (2022–2025) on OSCs with PCE >20%, analyzing key strategies: photoactive material innovation (wide-bandgap polymer donors, narrow-bandgap non-fullerene acceptors), multi-component system construction, deposition protocol optimization, solid/solvent additive engineering, and hole/electron transport layer development. Empirical data from 15 high-impact studies reveal PCEs of 20.0–20.6% in single-junction devices and 20.2–26% in perovskite/organic tandem cells, with interfacial engineering (e.g., yttrium phosphotungstate, carbazole-modified 2PACz, naphthalene diimide interlayers) suppressing bimolecular recombination and enabling scalable large-area fabrication. Operational stability remains a bottleneck: amide-based cathode interlayers achieve 20% PCE with dual-modification mechanisms, while self-assembled monolayers enable hole transport layer-free devices with 18% efficiency and improved stability. The review identifies next-stage challenges: reducing voltage losses (to <0.5 V), scaling deposition uniformity beyond 100 cm², and achieving cost parity with silicon (<$0.30/Wp). These issues are critical for flexible and wearable power suppliers, where mechanical durability (<5% PCE degradation after 1000 bending cycles) and low-temperature processing (<150°C) are mandatory. The analysis provides a roadmap for industrial translation, emphasizing that material–device co-optimization, rather than isolated breakthroughs, will determine commercial viability.