SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4494-9
Superionic conductors exhibit high cation mobility arising from weak binding and continuous transport pathways, atomistically characterized by extensive structural disorder and partial occupancy akin to amorphization. This disorder, whether confined to a cation sublattice or extended to full amorphization, strongly impedes lattice thermal transport, rendering these materials intrinsically ideal thermal insulators. This work investigates Ag26I18W4O16, a superionic conductor tunable from fully amorphous to single-crystalline states, as a model system to probe the impact of disorder and amorphization on thermal transport. Extensive Ag+ disorder, in both crystalline and amorphous phases, reduces thermal conductivity to approximately the theoretical lower bound of 0.16 W/m-K with virtually no temperature dependence, while concurrently achieving the lowest mean sound velocity ever recorded for a dense solid. Pair distribution function (PDF) analysis of synchrotron X-ray total scattering data indicates that short-range disorder (< 5 Å), rather than long-range periodicity, governs thermal insulation performance in both phases. These findings suggest a design strategy reconciling structural stability with glass-like thermal insulation.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4294-4
Room-temperature phosphorescence (RTP) polymer materials are attractive for flexible electronics and information encryption due to their tunability and processability. However, achieving polymeric RTP systems that simultaneously exhibit high thermal sensitivity, reversible multicolor emission, and long phosphorescence lifetime (τPhos) with high quantum yield (ΦPhos) remains challenging. Here, we report an in-situ cross-linked self-assembly strategy that converts flexible polymers into rigid polymer microspheres, yielding long τPhos, high ΦPhos, and thermally and time-dependent tunable RTP. The resulting microspheres (PM0.1-0.01-1) exhibit a maximum τPhos of 1754 ms and ΦPhos of 42.83%, markedly superior to previously reported intrinsic polymer RTP materials. At 77 K, they display ultralong green emission with a lifetime of 6019 ms and visible afterglow lasting up to 99 s. The cross-linked microspheres enable time-dependent, continuously tunable RTP and thermally responsive color switching, while maintaining excellent phosphorescence stability in aqueous and high-temperature environments. This provides a versatile platform for dynamic information encryption, full-color afterglow LEDs, and temperature sensing. The strategy establishes a general design principle for developing multidimensional, controllable, and stable high-performance polymer RTP materials.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4166-5
Oxygen evolution reaction (OER) represents a significant kinetic bottleneck in sustainable energy conversion due to its complex multi-step electron transfer process. Spin manipulation has recently emerged as a promising strategy to overcome traditional catalytic scaling relationships. However, the commonly used ferromagnetic materials or external magnetic fields suffer from practical limitations including material constraints and high energy consumption. The chiral-induced spin selectivity (CISS) effect in chiral inorganic nanomaterials with high stability, conductivity, and exceptional chiroptical properties offers a groundbreaking alternative by enabling spin polarization without the need for external magnetic fields. This review systematically examines the application of chiral inorganic nanomaterials for improving OER efficiency via the CISS effect. The fundamental principles of CISS and its influence on OER kinetics are discussed. Recent experimental advances highlighting the enhanced catalytic performance are analyzed. Future research directions and challenges in leveraging chirality and spin as key design principles for next-generation OER electrocatalysts are highlighted.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3712-2
Electrochemical potential and ion diffusion of electrode materials restrain the energy and power densities of lithium-ion batteries, and these challenges also remain in the intercalation-type Li3VO4 (LVO). In this work, the local [VO4] coordination symmetry in LVO is broken by a higher concentration of oxygen vacancies (Vö), resulting in an increased average V–O bond length and a larger ligand field splitting. These alterations reduce the energy level of the lowest unoccupied orbitals (e*) and lift the electrochemical potential, resulting in a higher voltage output. Additionally, the broken local symmetry in Vö-LVO is found to reduce the band gap and expand the ion transport channels, which favors enhancing electronic conductivity and facilitates ion diffusion, thereby improving the electrochemical kinetics in the energy storage process. The local symmetry broken sample (Vö-LVO) achieves a significantly improved capacity of 532 mAh/g at 0.1 A/g in comparison with 394 mAh/g of pristine LVO, and long cycling stability with retained capacity of 398 mAh/g at 1 A/g over 500 cycles compared with 236 mAh/g of the pristine LVO. The fundamental understanding paves the way to exploit high-performance electrodes via ligand field engineering for next-generation rechargeable batteries.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3407-0
Grain boundary (GB) engineering has emerged as a promising strategy to enhance the near-room-temperature performance of Mg3(Sb,Bi)2-based thermoelectric materials, yet effective control of Mg distribution at GBs remains a significant challenge. Here, we report a novel approach to achieve targeted Mg segregation at GBs through strategic Ag incorporation in Mg3.3Sb0.5Bi1.497Te0.003. Through comprehensive microstructural characterization and first-principles calculations, we demonstrate that Ag preferentially segregates at GBs, forming Mg-rich MgAg alloy phases while maintaining limited solid solubility within the matrix. This unique GB architecture simultaneously optimizes multiple thermoelectric parameters: the Mg-rich GB regions significantly provide efficient carrier transport channels and enhance carrier mobility, while the MgAg phases and lattice disorders effectively scatter phonons without disrupting electron transport. Consequently, the optimized composition (x = 0.01) exhibits a remarkable enhancement in power factor at 300 K and maintains an average ZT of ~1.0 across 300–400 K. The material also demonstrates excellent mechanical properties and thermal stability, making it particularly suitable for near-room-temperature applications. Our findings not only establish an effective strategy for GB engineering in Mg3(Sb,Bi)2 systems but also provide valuable insights into the rational design of high-performance thermoelectric materials through interface modification.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025010608
This study investigated the occurrence and distribution of 27 per- and polyfluoroalkyl substances (PFAS) in surface water and sediment of the Fuchun River, a tributary of the Qiantang River Basin. Surface water samples were analyzed using ultra-performance liquid chromatography coupled with high-resolution mass spectrometry. Total PFAS concentrations (∑PFAS) in surface water ranged from 30.04 to 105.26 ng/L, with mean and median values of 59.64 ng/L and 51.43 ng/L, respectively. The dominant compounds were perfluorooctanoic acid (PFOA), hexafluoropropylene oxide dimer acid (GenX), and perfluorobutanoic acid (PFBA). Concentrations generally decreased from upstream to downstream, consistent with previous studies. Notably, GenX levels were significantly elevated compared to earlier reports. In sediment, ∑PFAS concentrations ranged from not detected (ND) to 0.59 ng/g dry weight, with mean and median values of 0.14 ng/g and 0.11 ng/g, respectively. PFOA and perfluorooctanesulfonic acid (PFOS) were the primary sediment contaminants. Source apportionment indicated that industrial wastewater discharge and sewage treatment plant effluents were the main sources of PFAS in the river. Risk assessment using risk quotients suggested low ecological risks to aquatic organisms for most detected PFAS. However, the presence of short-chain and novel PFAS warrants further investigation due to potential unknown risks.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202511090
In ecological restoration projects such as wetland reconstruction and mine reclamation, seedling transplantation or mechanical damage often leads to slow healing, reducing survival rates and weakening carbon sequestration and soil-water conservation functions. To address secondary pollution from traditional chemical remediation, this study developed a self-powered piezoelectric hydrogel for green electrical stimulation of plant wounds. The hydrogel, based on polyacrylamide/polyethylene glycol (PAM/PEG) with CaCl2, formed a microporous, locally ordered piezoionic network. Characterization included microstructure, piezoionic response, and water retention. At 30 °C and 55% relative humidity, the hydrogel retained about 70% mass after 80 h of continuous water loss. Under simulated environmental mechanical forces, the hydrogel generated a peak voltage of approximately 6 mV. In tomato seedling stem models, wound callus area ratios reached approximately 49.50%, 64.87%, and 86.13% at 3, 5, and 10 days, respectively, when the hydrogel was attached and driven by environmental forces. The PAM/PEG/CaCl2 hydrogel efficiently converts environmental mechanical energy into mild electrical signals, promoting plant wound healing, reducing exogenous chemical use, and offering a low-carbon, environmentally friendly material pathway for ecological restoration and urban green space management.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025021401
This study investigated the occurrence, distribution, sources, and ecological risks of 19 organophosphate triesters (OPEs) and 8 diesters (di-OPEs) in surface water and sediments from the Hangzhou section of the Qiantang River. Samples were analyzed using liquid chromatography-high resolution mass spectrometry. Concentrations of ΣOPEs in water ranged from 31.5 to 98.9 ng/L, and in sediments from 10.8 to 341 ng/g dry weight (dw). Σdi-OPEs ranged from 2.19 to 104 ng/L in water and 0.437 to 106 ng/g dw in sediments, indicating moderate to low contamination. TCIPP and TCEP dominated OPEs in water, while TEHP was the predominant OPE in sediments. DBP was the major di-OPE in water, and DPHP in sediments. Source apportionment via correlation and principal component analysis identified industrial production and human activities, including household, tire, plastic manufacturing, and agricultural practices, as primary sources. Ecological risk assessment revealed negligible risks for most OPEs in water, but notable risks in sediments: TEHP and EHDPP posed risks to crustaceans, and TPHP to algae. Moreover, combined toxicity at multiple sediment sampling sites raised concern, warranting further attention.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2026020207
Although the production and use of hexabromocyclododecanes (HBCDs) have been completely banned in China since December 2021, historical production activities may still leave high-concentration residual contamination in localized areas. This study investigated a typical legacy site of historical HBCDs production in eastern China. Surface and core soil samples were systematically collected both inside and outside the former plant area to characterize the occurrence, spatial distribution, and environmental burden of HBCDs, and to evaluate associated human health risks. Results showed that HBCD concentrations in soils outside the plant area ranged from below detection limit to 6.90×10² ng·g⁻¹ dw, while those inside the plant area were substantially higher, reaching up to 1.18×10⁶ ng·g⁻¹ dw. γ-HBCD was the dominant isomer; however, its relative abundance was lower than that reported in commercial HBCD mixtures and in previous studies conducted near production facilities. Outside the plant, HBCDs concentrations in soil generally decreased with increasing distance from the site, yet remained detectable at a distance of approximately 10 km (15.2 ng·g⁻¹ dw). Within the plant area, HBCDs concentrations in soil cores decreased with depth, declining from 1.08×10⁴–1.18×10⁶ ng·g⁻¹ dw in surface soils to 1.05–93.5 ng·g⁻¹ dw at depths of about 4 m. Analysis of the relative cumulative environmental burden indicated that although HBCDs loads were highest in the near-source area, they gradually accumulated over a broader spatial scale. Approximately 23.7%, 40.1%, 60.0%, and 87.1% of the total estimated burden accumulated within 2 km, 2.81 km, 4 km, and 6 km from the site, respectively. Health risk assessment indicated that oral ingestion of soil was the primary exposure pathway for different populations. Localized high-contamination zones within the plant area contributed significantly to non-carcinogenic risks, while overall risks for children outside the plant area were at acceptable levels.