SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4473-9
Selective ion separation is critical for resource recovery, water treatment, lithium extraction from salt lakes, and nuclear waste management, yet the differences in size, solvation structure, and coordination behavior among ions are often minimal, and separation is further complicated by valence, interfacial charge, and competing ions. Nanoporous materials with tunable sub-nanometer channels and chemically active interfaces can regulate ion entry, solvation reorganization, interfacial partitioning, intrapore migration, and release. This review examines three mechanistic categories—size and solvation sieving, chemical recognition, and dynamic gating—from the perspective of confined transport and ion–pore interactions, and compares their roles and coupling in systems of monovalent–monovalent, divalent–divalent, heterovalent, and chemically similar multivalent ions. We further distinguish selective adsorption, membrane enrichment, and transmembrane transport, and discuss how selectivity definitions, ion flux, feed composition, driving force, and operating time affect performance evaluation. Current research faces three major challenges: lack of comparability of performance data across different test conditions, insufficient direct evidence of ion solvation, site occupancy, and migration under operating conditions, and the complexity of feed streams. By adopting a sequential ion transport process as a unified conceptual framework, this review systematically compares separation mechanisms across diverse nanoporous materials, including MOFs, COFs, zeolites, 2D materials, microporous polymer membranes, ion-exchange membranes, biomimetic nanochannels, organic–inorganic composites, functionalized porous carbons, and biochars. This transport-process-oriented framework provides a general and mechanistic perspective for understanding and comparing selective ion separation across diverse nanoporous platforms.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4269-4
Self-assembled molecular interlayers (SAMs) are promising hole-selective contacts for high-efficiency organic solar cells (OSCs) due to their well-defined energy alignment and minimal parasitic absorption. However, their intrinsically limited mechanical robustness often leads to structural degradation and performance loss under mechanical deformation, restricting their application in flexible devices. Here, we report a nanoparticle-reinforced self-assembled composite interface that simultaneously enhances mechanical reliability and optoelectronic performance. Uniformly dispersed SiO2 nanoparticles are introduced as high-modulus reinforcing building blocks without disturbing molecular self-assembly. In contrast to NiOx nanoparticles, which suffer from aggregation and parasitic absorption, SiO2 nanoparticles exhibit excellent dispersion and optical transparency, enabling formation of a structurally compatible hybrid interface. Mechanistic studies reveal that SiO2 nanoparticles redistribute interfacial stress and form dynamic hydrogen-bond networks with phosphonic acid groups of 2PACz, providing efficient energy dissipation during cyclic deformation. Meanwhile, modulation of interfacial polarity extends the crystallization time window of the active layer, resulting in enhanced molecular ordering and improved charge transport. As a result, devices based on the SiO2/2PACz composite interface achieve a power conversion efficiency of 20.14% for rigid devices and 19.30% for flexible devices, placing the flexible devices among the highest-performing flexible OSCs reported to date, while retaining over 90% of their initial efficiency after repeated bending cycles. This work establishes a general strategy for overcoming the trade-off between electronic selectivity and mechanical robustness in ultrathin self-assembled molecular interfaces, providing design insights for high-performance flexible organic optoelectronics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4342-3
Electron acceptors containing single-bond-linked building blocks offer attractive advantages for organic solar cells owing to their synthetic simplicity and structural modularity. However, achieving backbone planarity without compromising electronic compatibility remains a persistent challenge. Conventional conformational locking strategies based on alkoxy substitution can effectively suppress torsional freedom but often elevate the highest occupied molecular orbital energy level, limiting compatibility with widely used donor polymers. Here, we report a partially fused electron acceptor design that achieves intrinsic backbone planarity through heterocycle selection rather than side-chain-assisted conformational locking. By incorporating a benzodifuran core and furan-thiophene linkages, the resulting acceptors exhibit a near-coplanar backbone geometry as revealed by density functional theory calculations, without the need for electronically perturbing alkoxy groups. Devices based on the optimized acceptor (BDF-1) deliver a binary power conversion efficiency of 12.2%, and further improvement to 19.5% is achieved in a ternary blend with PM6 and BTP-eC9. The enhanced performance is accompanied by favorable morphology, balanced charge transport, and suppressed recombination losses. This work provides molecular-level insight into partially fused acceptor design and demonstrates that heteroatom-guided conformational locking offers a viable strategy for expanding the design space of acceptors with single-bond-linked building blocks while maintaining compatibility with mainstream donor systems.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4277-1
Two-dimensional (2D) magnetic materials hold promise for next-generation spintronics, yet most exhibit Curie temperatures (Tc) far below room temperature, limiting practical applications. Here, we report the realization of room-temperature ferromagnetism in CuCrSe2 nanosheets via controlled anion removal achieved by post-synthetic vacuum annealing. Raw CuCrSe2 shows a low Tc of ~120 K, whereas annealed CuCrSe2 (A-CuCrSe2) nanosheets exhibit robust ferromagnetic ordering above 300 K. Structural and compositional analyses, including transmission electron microscopy, Raman spectroscopy, and X-ray absorption spectroscopy, confirm that A-CuCrSe2 retains the original layered crystal structure with an estimated Se vacancy concentration of approximately 10%. Magnetic measurements reveal room-temperature ferromagnetism in exfoliated nanosheets, corroborated by magnetic imaging and electric transport measurements. Anomalous Hall effect (AHE) measurements uncover the coexistence of two ferromagnetic phases within the same sample: one with low Tc (~120 K) and another with high Tc (>300 K), indicating spatially heterogeneous magnetic ordering driven by anion removal distribution. Density functional theory (DFT) calculations elucidate the microscopic mechanism, suggesting that Se vacancies modulate the magnetic exchange interactions, enhancing Tc. This work demonstrates that anion modulation is an effective intrinsic strategy to achieve room-temperature ferromagnetism in 2D materials, potentially advancing spintronic applications.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025010302
Cadmium (Cd) contamination of agricultural soils poses significant economic and health risks. While extensive research has focused on Cd accumulation in staple crops like rice, data on oilseed crops remain scarce, hindering safety assessments of edible oils and oilseed meals. This study investigated Cd accumulation and translocation in rapeseed (Brassica napus) grown in You County, Hunan Province, a region severely contaminated with Cd. Rhizosphere soil and plant tissues (roots, stems, seeds) were collected and analyzed for Cd concentrations. Results showed that approximately 71% of rhizosphere soil samples exceeded the agricultural soil pollution risk screening value for Cd, indicating high ecological risk. Cd concentrations in roots and stems were (0.49 ± 0.39) mg·kg⁻¹ and (0.54 ± 0.31) mg·kg⁻¹, respectively, comparable to or higher than soil Cd levels (0.51 ± 0.31) mg·kg⁻¹, with elevated bioaccumulation and translocation factors. This suggests that improper disposal of rapeseed roots and stems, such as returning them to fields or burning, could lead to secondary Cd pollution. In contrast, Cd bioaccumulation and translocation factors in seeds were less than 1, and Cd concentrations in seeds, oil, and oilseed meals were relatively low. Comparative analysis with sesame, camellia oleifera, and peanut indicated that rapeseed-derived oil and meal contain lower Cd levels, positioning rapeseed as a promising low-Cd-accumulating edible oil crop for cultivation in Cd-contaminated areas.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202604003
Emerging contaminants (ECs) in wastewater from urban transportation infrastructure remain poorly characterized. This study employed high-resolution mass spectrometry (HRMS)-based non-target screening to systematically identify the composition and spatial distribution of ECs in wastewater from three functional zones of a metro maintenance depot: storeroom (S1), office/residential area (S2), and final discharge outlet (S3). A total of 417 contaminants were detected, spanning eight categories including industrial materials, pharmaceuticals, pesticides, and natural products. Among these, 48 substances were identified with Level 1 confidence via spectral matching. Pesticides exhibited the highest detection frequency and concentration levels, representing the primary contaminant load. Semi-quantitative concentration heatmaps of 24 pesticides revealed significant spatial variation: S2 showed the highest number and concentration of contaminants, reflecting inputs from landscaping and vector control; S1 and S3 showed lower levels, indicating dilution, migration, and attenuation. Representative pesticide bifenox displayed a clear concentration gradient (S2 > S1 > S3), suggesting transport mechanisms such as surface runoff, hydraulic transfer, and sorption. These findings underscore the complexity and diversity of EC sources in metro depot wastewater, highlight the need to prioritize pesticides in regulatory management, and provide fundamental data for understanding EC environmental behavior and informing water environment risk assessment.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3487-x
Continuous carbon fiber-reinforced ZrB2-SiC ceramic matrix composites are promising thermal protection materials for hypersonic vehicles and reusable spacecraft. Although injection-assisted vacuum impregnation (IVI) offers advantages such as shorter processing cycles, lower costs, and reduced fiber damage compared to conventional methods, phenolic/acetone-based IVI systems yield composites (designated as CPS) with limited ceramic contents. To address this, an aqueous slurry-based IVI approach was developed, producing composites designated as CHS. After a single IVI cycle, CHS achieved a ZrB2 phase volume fraction of 25 vol.%, 47% higher than CPS, while reducing processing time by 49%. After chemical vapor infiltration, CVI-CHS composite exhibited a room-temperature compressive strength of 106.78±10.53 MPa, representing a 28% improvement over CVI-CPS. Crack propagation analysis revealed discontinuous zigzag patterns under compression, dominated by fiber bridging and pull-out energy dissipation mechanisms. Flexural results revealed both composites retain considerable strength (111.15±12.46 and 83.15±12.03 MPa) along with low flexural modulus (13.00±2.41 and 13.52±6.99 GPa) and high strain tolerance (1.32%±0.018% and 1.07%±0.34%). It is attributed to the anisotropy of fiber preforms and the elastic modulus mismatch among different phases, which hindered effective constraint of fibers by the matrix and, in turn, facilitated mitigation of stress concentration. Additionally, CVI-CPS demonstrated superior X-band electromagnetic interference (EMI) shielding (34–36 dB) compared to CVI-CHS (22–27 dB), resulting from synergistic effects between pyrolitic and deposited carbon in the matrix of the former. Both composites showed enhanced EMI shielding efficiency with increasing temperature up to 600°C. This eco-friendly aqueous IVI strategy enables high-performance, cost-effective thermal protection materials with higher ceramic loading and tunable multifunctional properties.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3938-0
Chirality is a fundamental property ubiquitous in nature, playing a pivotal role across physics, chemistry, biology, and materials science. With the advent of nanotechnology, chiral research has extended to the nanoscale, where chiral quantum dots have attracted attention due to high photoluminescence quantum yields and stability. However, conventional II–VI quantum dots often contain toxic heavy metals, exhibit poor water solubility and biocompatibility, and require complex preparation. Carbon dots (CDs), a novel class of carbon-based nanomaterials under 10 nm, offer low toxicity, straightforward synthesis, and excellent biocompatibility. Chiral carbon dots (Ch-CDs) combine the advantages of CDs with intrinsic chirality, endowing them with circularly polarized luminescence (CPL) and distinctive photophysical and chemical properties. This review systematically refines and summarizes construction strategies for Ch-CDs, including one-step synthesis, surface modification, and assembly methods. It comprehensively elaborates on recent advances in optical properties, focusing on tunable multicolor CPL, CPL enhancement, and triplet-state emission, addressing a gap in reviews on triplet-related chiral functionalities. The challenges and future perspectives for diversified applications are proposed. Ch-CDs have been extensively applied in photoelectric detection, optical devices, biomedicine, information anti-counterfeiting, and encryption. This review aims to summarize current achievements and stimulate further research, fostering rapid development in the Ch-CDs field.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025100102
Per- and polyfluoroalkyl substances (PFAS) are emerging contaminants of concern in China, and drinking water is a major exposure pathway. This study investigated 17 PFAS in surface water from 12 drinking water sources along the Hubei section of the Yangtze River mainstream during dry, normal, and wet seasons. Total PFAS concentrations ranged from 10.84 to 41.05 ng/L (dry), nd to 62.60 ng/L (normal), and 6.77 to 29.00 ng/L (wet). Predominant compounds were PFBS, PFOA, PFHxA, PFBA, and PFOS. Lake-type sources exhibited significantly higher concentrations than river-type sources, and dry and normal seasons showed higher levels than wet season. Compared to other Chinese sources, PFAS levels in Hubei were moderate, with fluorochemical plant inputs and population density as likely influencing factors. Ecological and health risk assessments indicated acceptable risks. In four selected water supply systems, PFAS distribution from source to tap was examined; PFOA, PFBA, PFHxA, and PFBS were dominant, and secondary water supply did not significantly introduce or remove PFAS. Health risks from tap water were within acceptable limits.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202606022
This study presents a numerical simulation of the internal flow field in a volatile organic compounds (VOCs) catalytic combustion reactor used in an enameled wire enterprise. Using ANSYS Fluent, the effects of inlet expansion section length, inlet expansion section angle, and catalyst bed spacing on the velocity field were systematically investigated. Additionally, the influence of heating tube configuration on the temperature field was analyzed. The results indicate that an expansion section length of 250 mm is optimal, balancing spatial constraints and the avoidance of recirculation zones. A zero-degree expansion angle yields the most uniform velocity distribution, though practical considerations necessitate case-specific angle selection. A catalyst bed spacing of 0.05 m satisfies the engineering requirement of maintaining pressure drop across a single catalyst layer below 200 Pa while significantly improving gas distribution within the bed. Alternating heating tubes on both sides of the reactor enhance temperature uniformity and elevate the overall catalyst bed temperature, thereby promoting efficient VOCs catalytic combustion. These findings provide quantitative guidance for reactor design optimization, contributing to improved catalytic performance and extended catalyst lifespan.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202511003
Tailings dam leakage can cause secondary sudden water pollution events, imposing severe combined stress of high turbidity and heavy metal contamination on natural water bodies within a short period, threatening aquatic ecological security. Existing studies have systematically revealed the pollution characteristics and biological effects of such events, which are fundamentally distinct from natural high-turbidity water and industrial wastewater leakage. Compared with natural high-turbidity water, tailings leakage inputs finer particles with higher specific surface area, leading to more intense and prolonged turbidity stress. Meanwhile, heavy metals in tailings are more enriched than natural sediments, with higher proportions of active forms and bioavailability, causing significant bioaccumulation and toxic effects, and long-term decline in benthic community species richness. Compared with industrial wastewater leakage, tailings leakage simultaneously releases high concentrations of fine suspended solids and multiple heavy metals, forming a unique 'physical-chemical' combined stress. This synergistic effect amplifies biological toxicity through multiple pathways such as mechanical damage, light limitation, and oxidative stress, resulting in severe and often irreversible ecological damage, such as impaired fish swimming behavior and collapse of benthic community structure. Analyzing the long-term impacts of tailings leakage on aquatic ecosystems from the perspective of combined stress is helpful for providing scientific basis for emergency response and medium-to-long-term ecological risk prevention of related sudden water pollution events.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3843-9
Lignocellulose-based electromagnetic interference (EMI) shielding materials are gaining prominence across multiple sectors, driven by the growing EMI issues associated with rapid advances in communication technologies and electronic devices. These materials have demonstrated significant superiority over traditional EMI shielding solutions, which are often hampered by high cost and environmental concerns. This review emphasizes the excellent potential of lignocellulose as a cost-effective and flexible alternative to deliver the hierarchical structures and functional properties that qualify it for EMI shielding applications. The underlying EMI shielding mechanisms are then elucidated, with a focus on the benefits conferred by lignocellulose in such material systems. Furthermore, typical fabrication strategies for lignocellulose-based EMI shielding materials are comprehensively summarized, along with a discussion of their emerging applications in diverse scenarios. Finally, the challenges encountered in developing lignocellulose-based EMI shielding materials and their significant prospects for future boosting high-performance design and application are also outlined. The insights presented herein are expected to promote the development of efficient and green lignocellulose-based EMI shielding materials that meet the evolving demands of modern society.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3995-6
The deployment of single-site metal catalytic nodes into zirconium-based metal-organic frameworks (Zr-MOFs) offers vast advantages in catalytic recyclability, product separation, and mechanistic analysis, underscoring their paramount significance in heterogeneous catalysis. Nonetheless, their occupation within pores/channels usually diminishes mass transfer and catalytic efficiency during reactions such as the hydroboration of carbonyl compounds, especially for bulkier substrates. To address this issue, three microporous single-site Ti(IV) embedded Zr-MOFs with sequentially extended ligand arms are novelly synthesized to enable precise pore modulation ranging from 9.04, 10.12, to 11.18 Å. The catalytic performance is investigated using eight carbonyl compounds of varying sizes and four additional larger-scale substrates, which demonstrates that the catalytic efficiency is increased through pore size regulation, yet still away from optimal catalytic performance. Then a further strategy was shifted to the linker installation of linear dicarboxylate ligands chelated single-site Ti(IV) within coordination-unsaturated windows of mesoporous Zr-MOFs, and the result elucidates that the obtained catalyst exhibits superior catalytic efficiency (all exceeding 90%) while preserving the inherent mesoporosity of Zr-MOFs with a pore size of approximately 21.73 Å. We believe this research provides critical guidance for future research on structural design and catalytic optimization of MOFs, opening new avenues in heterogeneous catalysis.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4044-3
Efficient sequestration of radioactive iodine species (I2, CH3I, I3−) is vital for nuclear safety and environmental protection. However, developing multifunctional adsorbents that remain effective under diverse conditions remains a significant challenge. Herein, we report two functionalized PD-COFs (PD-WS and PD-WY) with moderate crystallinity, outstanding thermal stability, and robust chemical resistance. They exhibit superior adsorption performance in both gas and liquid phases. Specifically, at 75°C, PD-WY achieves capacities of 4.88 g g−1 for I2, 1.55 g g−1 for CH3I, and 5.55 g g−1 for the I2/CH3I mixture, while high capacities are also retained at room temperature. In solution, PD-WY adsorbs up to 3.56 g g−1 of I3− in water and 2.00 g g−1 of iodine in cyclohexane. These COFs display rapid kinetics (K80% = 3.25 g g−1 h−1 for I2 and 7.89 g g−1 h−1 for I3−) and excellent selectivity. Mechanistic studies indicated that the excellent iodine affinity of PD-COFs arises from their rich electronic structures, abundant active sites, and charge transfer interactions. These findings position PD-COFs as highly promising adsorbents for nuclear waste treatment and environmental remediation.
SCIENCE CHINA Materials•2025•DOI: 10.1007/s40843-025-3587-4
Unstable zinc interfaces arising from dendrite growth and parasitic reactions impede the practical deployment of rechargeable aqueous zinc-ion batteries. This study introduces 1-(2-pyridylazo)-2-naphthol (PAN) as a parts-per-million (ppm) level electrolyte additive to stabilize the Zn anode. Theoretical and experimental analyses reveal that PAN undergoes parallel adsorption on the Zn surface, establishing strong π-π interactions between adjacent molecules that efficiently repel water. The OH, pyridine N, and azo N groups in PAN chelate Zn2+, modulating Zn2+ diffusion and promoting uniform deposition while suppressing dendrite formation. A 10 ppm (0.04 mM) PAN addition extends the lifespan of a symmetrical cell to 1500 h at 2 mA cm−2 and 1 mAh cm−2. The Zn||Cu half-cell achieves a Coulombic efficiency of 99.91% over 3500 cycles at 5 mA cm−2 and 1 mAh cm−2. Full cells with NH4V4O10 and MnO2 cathodes exhibit enhanced cycling stability. Notably, a Zn||NH4V4O10 pouch cell retains 71.1% capacity after 250 cycles at 0.8 A g−1. This work demonstrates a viable strategy for selecting high-efficiency additives for aqueous metal-based batteries.