SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3757-2
β-Ga2O3 is a promising candidate for solar-blind ultraviolet photodetection owing to its suitable bandgap of approximately 4.9 eV, excellent photoresponse characteristics, and high stability. However, the lack of a sufficient driving force within the material leads to extensive bulk charge recombination, limiting its photocurrent and thus posing significant challenges in designing high-performance Ga2O3-based photodetection. In this study, we propose a gradient doping strategy to achieve a Sn-doping concentration gradient along the β-Ga2O3 film thickness. By combining sol–gel synthesis with rapid thermal annealing, a spatially graded band structure with a full-space built-in electric field is constructed, which increases the width of band bending over a large region and is crucial for significantly enhancing carrier separation and transport in the bulk. The resulting gradient Sn-doped β-Ga2O3 enables exceptional photoelectric performance without an external bias under 254 nm irradiation, including a superior responsivity of 66.88 mA W−1, a high detectivity of 8.12 × 10^11 Jones, and a fast rise/decay time of 79/65 ms, outstanding most existing similar reported photoelectrochemical (PEC) type optoelectronic devices. Additionally, the device exhibits excellent long-term stability and enables high-resolution underwater ultraviolet imaging. This study demonstrates that the gradient doping strategy provides a feasible approach for enhancing the PEC performance of β-Ga2O3 photoelectrodes.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202507021
The accumulation of heavy metals in soil around municipal solid waste landfills poses potential risks to human health. This study selected a municipal solid waste landfill and monitored the concentrations of eight heavy metals (Zn, Pb, Cd, Ni, Hg, Cu, As, Cr) in surrounding soil. The geo-accumulation index method was used for pollution assessment, and a health risk assessment model recommended by the USEPA, combined with Monte Carlo uncertainty analysis, was employed to evaluate the pollution status and health risks to nearby residents. Results showed that among the eight metals, Pb, Ni, and Cd exceeded risk screening values at 4.26%, 6.38%, and 4.26% of sampling points, respectively. Geo-accumulation indices indicated overall clean conditions (mean < 0), but slight pollution by Pb, Zn, Ni, Hg, and Cd at some points. Probabilistic risk assessment based on Monte Carlo simulation revealed that for both adults and children, the cumulative non-carcinogenic risk was negligible, while carcinogenic risk was acceptable. However, there was a very low probability (approximately 0.2%) of non-carcinogenic risk for children, and probabilities of unacceptable carcinogenic risk were 0.64% for adults and 3.21% for children. Nickel was the primary contributor to carcinogenic risk, and children faced higher health risks than adults. These findings provide a reference for pollution prevention and health risk management of soil around municipal solid waste landfills.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(25)60622-0
Photocatalytic production of hydrogen peroxide (H2O2) from sustainable biomass-derived carbon catalysts offers a renewable route to valuable chemicals, yet the regulatory role of surface functional groups on reaction kinetics remains underexplored. Here, hydrothermal carbon spheres (CS) rich in oxygen-containing functional groups demonstrated a remarkably high H2O2 production rate of 653 μmol/(g·h) in both pure water and actual seawater, without any sacrificial agent. The catalyst also exhibited outstanding activity in visible-light-driven photocatalytic oxidation of benzylamine to imines, achieving 92% conversion and >99% selectivity. Comprehensive analysis revealed that CS was rich in surface oxygen-containing functional groups, a feature strongly associated with its high photocatalytic efficiency. The observed positive Zeta potential of CS in seawater likely diminished electrostatic repulsion against positively charged intermediates, facilitating their accumulation at the liquid-solid interface. This work proposes a strategic framework for developing metal-free photocatalysts from biomass, offering a sustainable pathway for photocatalytic applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3877-7
Circularly polarized (CP) photodetectors are pivotal for optical communication, polarization imaging, and target recognition. Chiral organic materials offer structural tunability, solution processability, and compatibility with flexible substrates, yet their development is hindered by synthetic challenges, enantiomeric separation difficulties, and intrinsically weak chiroptical responses. Recent advances in molecular design and solid-state assembly have markedly enhanced device performance. This review summarizes developments in chiral organic materials for CP photodetection, focusing on molecular design and supramolecular engineering. It highlights strategies such as chiral non-fullerene acceptors, cooperative supramolecular polymerization, and chiral 2D supramolecular organization in single crystals, which amplify dissymmetry factors and enable high-performance detection across UV to near-infrared regions. Potential applications in spin-encoded communication, biological sensing, and quantum computing are discussed. The review aims to deepen understanding and foster interdisciplinary research in this emerging field.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202509080
Plastic pollution poses a global environmental challenge, and developing efficient, low-cost pyrolysis catalysts is crucial for resource recovery from plastic waste. This study investigates ex-situ catalytic pyrolysis of low-density polyethylene (LDPE) over ZSM-5 (Si/Al = 25) modified with Zn and Fe at loadings of 5% and 10% via impregnation. Catalysts were characterized by XRD, FT-IR, XPS, SEM, TEM, and BET. TGA was used to assess thermal behavior, and catalytic pyrolysis experiments were conducted in a tube furnace at 450 °C, with product analysis by GC-MS. Results show that metal incorporation preserved the ZSM-5 framework while modifying acid site distribution and surface morphology, enhancing cracking and dehydrogenation. All modified catalysts increased light gasoline-range hydrocarbon yield and reduced heavy fractions compared to non-catalytic runs. Among them, 10% Zn/ZSM-5 exhibited the best performance, boosting light gasoline hydrocarbons to 74.77%, approximately three times that of the non-catalytic case, significantly improving oil quality. This study demonstrates the potential of low-cost metal-modified zeolites for efficient and economical plastic waste pyrolysis.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60652-4
The performance of industrial zeolite catalysts, exemplified by fluid catalytic cracking (FCC) catalysts, is governed by microscopic behaviors including mass transfer, acidity, and coking. Conventional characterization techniques such as XRD, N2 physisorption, and TPD provide bulk-averaged or static ex situ information, failing to resolve dynamic processes under realistic reaction conditions. Recent advances in super-resolution fluorescence imaging enable nanoscale visualization of these key processes. This review systematically summarizes three critical applications: (1) Mass transfer diffusion: heterogeneous diffusion of reactant molecules within hierarchical pore networks is revealed, quantifying diffusion barriers and tortuosity. (2) Acid site accessibility: nanoscale localization of acid sites and their accessibility is achieved, correlating with catalytic activity. (3) Coking behavior: spatiotemporal evolution of coke species is identified, linking coke precursors to deactivation. The review elaborates how super-resolution imaging deepens understanding of fundamental catalytic mechanisms, providing theoretical support for rational design of high-performance catalysts through pore structure optimization, acid site regulation, and coking suppression. Current challenges and future directions are discussed, emphasizing the need for in situ correlation with catalytic performance.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3810-y
Amorphous metal-organic frameworks (aMOFs), with abundant defects and unsaturated coordination sites, are ideal precursors for investigating electrocatalytic reconstruction mechanisms. However, systematic understanding of how different modulation strategies affect reconstruction pathways and final active species remains lacking. Here, an amorphous MOF constructed from 3,4,9,10-pyrene-tetracarboxylic acid (PTA) serves as a controllable precursor to compare doping and alloying effects on structural reconstruction and oxygen evolution reaction (OER) performance. Doping promotes preferential reconstruction into Fe-rich (oxy)hydroxides with more exposed active sites, whereas alloying yields Fe-Co mixed (oxy)hydroxides with limited site exposure. The doped system FeCo0.05-PTA exhibits outstanding OER activity in alkaline conditions, with overpotentials of 208 and 248 mV at 50 and 100 mA cm−2, respectively, and a low Tafel slope of 36.2 mV dec−1. In situ Fourier transform infrared spectroscopy (FTIR) captures the OOH* intermediate, confirming the adsorbate evolution mechanism. Density functional theory (DFT) calculations show the doped system has the lowest free-energy barrier (ΔG = 0.59 eV) at the rate-determining step. This study underscores the decisive role of precursor design, elucidates distinct effects of doping and alloying on reconstruction pathways and final properties of amorphous MOF-derived (oxy)hydroxides, and provides insights for designing related electrocatalysts.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3858-8
High-quality β-Ga2O3 membranes are pivotal for fabricating high-performance memristive devices. Here, vertical Ag/β-Ga2O3/Pt memristors built on high-crystalline-quality β-Ga2O3 membranes via lattice epitaxy engineering and a sacrificial-layer-assisted exfoliation strategy are reported. The resulting β-Ga2O3-based device demonstrates a high ON/OFF ratio exceeding 10^8, low SET/RESET voltages of 0.13 V/−0.11 V, low programming current of 10^-10 A, stable data retention beyond 4 × 10^4 s, and excellent subthreshold characteristics of ~0.47 mV/dec. Adjustable compliance current enables the coexistence of volatile and non-volatile switching modes. Additionally, the resistive switching versatility is predominantly governed by the migration of Ag ions, as supported by electrical characterizations and first-principles calculations. Furthermore, a β-Ga2O3 memristor-based circuit that functions as a reconfigurable and non-volatile exclusive OR (XOR) logic gate has been designed and simulated, enabling both image encryption/decryption and edge detection. This work not only demonstrates lattice-engineered, high-quality β-Ga2O3 membranes for fabricating advanced memristors but also extends their applicability to digital logic and reconfigurable image processing.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202510060
Wastewater treatment plant (WWTP) effluent is a significant pathway for emerging contaminants (ECs) to enter natural water bodies. This study investigated the removal of ECs by two field-scale gravel-based constructed wetlands: a horizontal subsurface flow constructed wetland (QL-CW) and a surface flow constructed wetland (BL-CW), both treating actual WWTP effluent. The influence of operation mode and wetland plant type on EC removal was examined. Using liquid chromatography-mass spectrometry, principal component analysis, and ecological risk assessment, the removal efficiencies and mechanisms for various ECs were explored. In QL-CW, biodegradation was more pronounced, particularly via ammonia-oxidizing bacteria co-metabolism, favoring ECs with benzyl, secondary amine, secondary amide, tertiary amide, halogenated, and carboxyl functional groups. In BL-CW, electrostatic attraction and hydrophobic interactions were more significant, with plant and root-microorganism uptake and adsorption playing key roles. Surface flow mode achieved significantly higher removal of antibiotics (45.3% vs. 34.1%) compared to horizontal subsurface flow, while no significant differences were observed for non-antibiotic pharmaceuticals (66.6% vs. 64.4%) and pesticides (49.8% vs. 34.2%). Planting Cyperus alternifolius (windmill grass) was more beneficial for antibiotic removal (43.6% vs. 30.1%) than planting Ipomoea aquatica (water spinach). The wetlands effectively reduced the ecological risks of most ECs to marginal levels. This study provides insights into the deep treatment of ECs in WWTP effluent by constructed wetlands.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60643-3
The adsorption behavior and electron transfer mechanism of CO on Ptn/γ-Al2O3 catalysts (n = 4, 13) were systematically investigated using density functional theory (DFT) calculations, complemented by infrared (IR) spectroscopy, electron difference density (EDD), and charge decomposition analysis (CDA). The study reveals that Pt cluster size critically governs the adsorption configuration, electron transfer, and C–O vibrational frequency. For small Pt4 sub-nanometric clusters, highly unsaturated Pt atoms exhibit strong d-electron back-donation, leading to substantial filling of CO π* antibonding orbitals, significant weakening of the C–O bond, and a redshift in IR frequency. Conversely, large Pt13 clusters, characterized by dense structures and electron delocalization, exhibit weakened back-donation, enhanced C–O bonding, and a blueshift. The electron transfer intensity follows the order: linear < bridge < multi-terminal adsorption. Bridge adsorption is most sensitive to cluster size, displaying an IR blueshift of 81 cm−1 when Pt atoms increase from 4 to 13. Multi-terminal adsorption shows stable frequencies due to a 'saturation effect'. This study establishes a comprehensive correlation among Pt size, electronic structure, adsorption properties, and infrared response, providing atomic-scale theoretical guidance for designing efficient Pt-based catalysts with optimized CO adsorption strength and resistance to poisoning.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025040705
Chromium is a common environmental metal pollutant. Shewanella oneidensis MR-1 can generate extracellular electrons, facilitating the reduction of Cr(VI) to Cr(III), thereby mitigating its toxicity. Both biochar and electroactive dissolved organic matter (e-DOM) regulate extracellular electron transfer during Cr(VI) bioreduction. In practice, surface DOM on biochar can detach and enter the environment, while the biochar matrix (BCM) remains the predominant form and coexists with e-DOM. However, the combined effects of BCM and e-DOM on microbial Cr(VI) removal are unclear. This study investigated the individual and combined impacts of biochar matrix and AQDS (a model e-DOM) on Cr(VI) reduction by S. oneidensis MR-1. Results showed that biochar matrix or AQDS alone promoted Cr(VI) removal, primarily by accelerating electron transfer during the fast reduction phase. However, when both were added, an antagonistic effect was observed, attributed to increased repulsive forces between the biochar matrix-AQDS complex and the bacterial cells, which inhibited electron transfer to Cr(VI). This research elucidates the electrochemical interactions between biochar matrix and e-DOM, providing a theoretical basis for biochar applications in environmental remediation and risk assessment.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4000-1
Formamidine lead-based perovskites (FAPbI3) exhibit significant potential in optoelectronic applications. Nevertheless, they encounter challenges related to δ-phase instability and reliance on toxic solvents. In this study, we present a green solvent-additive synergy strategy that employs γ-valerolactone (GVL) in conjunction with reductive acids like oxalic acid (OA), to stabilize α-FAPbI3 single crystals (SCs). GVL enhances the stability of the precursors through the formation of FA+-GVL hydrogen bonds and high-valence [PbIx]2−x clusters, resulting in ambient-stable α-phase SCs, yielding a marked improvement in stability compared to SCs prepared with the toxic solvent γ-butyrolactone (GBL). Additive modulation demonstrates that H+ and reductive groups play a critical role in regulating crystallization, suppressing the δ-phase by promoting FA+ dissociation and inhibiting MA+ deprotonation. A solvent-involved intermediate, δ-FAPbI3-GVL, has been identified; this intermediate evolves into α-FAPbI3 at a low temperature of 60 °C, thereby reducing the energy barriers associated with the α to δ phase transition. In contrast, non-reductive acids and reductive ionic liquids do not inhibit δ-phase formation, with the latter even promoting the crystallization of pure δ-FAPbI3. By utilizing low-volatility OA as an additive, optimized FA0.9MA0.1PbI3 single crystal thin films exhibit a low defect density of 8.3 × 10^11 cm−3. Subsequently, a photodetector was fabricated. Under zero bias voltage and 780 nm illumination, the device exhibited a responsivity of 14.5 mA/W, a detectivity of 3.75 × 10^10 Jones, and a response speed of 149/65 μs. Moreover, without any encapsulation, the device’s performance diminished by only 17% after 30 days of storage in ambient conditions, indicating remarkable stability.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2026022702
This study systematically investigated the occurrence and vertical distribution of per- and polyfluoroalkyl substances (PFAS) in solid waste, leachate, and surrounding groundwater at a municipal solid waste landfill in Fuyang City, Anhui Province, China. A total of 23 PFAS were detected in solid waste, with total concentrations (∑PFAS) ranging from 7.95 to 172.28 ng·g⁻¹. Trifluoroacetic acid (TFA), an ultrashort-chain PFAS, was ubiquitous, contributing on average 59% to the total PFAS mass. PFAS composition varied with depth: long-chain PFAS dominated in middle and upper layers, while short-chain and ultrashort-chain PFAS were more abundant in deeper layers, indicating enhanced downward migration of shorter-chain compounds. Sulfonic acid PFAS exhibited increasing relative abundance with depth. Leachate ∑PFAS concentration was 14.35 μg·L⁻¹, dominated by short-chain compounds such as PFPrS and PFBS, consistent with the composition in bottom-layer waste. Groundwater surrounding the landfill contained multiple PFAS, with concentrations decreasing with distance from the landfill, confirming the landfill as a source of PFAS to the surrounding environment. Multivariate analyses (PCoA and Bray–Curtis dissimilarity) revealed that some groundwater samples closely resembled leachate in PFAS composition, suggesting direct impact via leachate migration. These findings underscore the role of landfills as significant reservoirs and sources of PFAS, particularly ultrashort-chain compounds, and highlight the need for improved leachate management to mitigate groundwater contamination.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4029-4
Chemical sensing technology is pivotal in modern industry and daily life, with sensor performance critically reliant on nanomaterials. While sensors based on traditional nanomaterials, such as inorganic semiconductors and organic conductive polymers, have achieved commercialization, they face persistent challenges. As an emerging subclass, conductive metal-organic frameworks (c-MOFs) not only inherit the core advantages of traditional MOFs—high specific surface area, porosity, and tunable composition/structure—but also offer adjustable electrical conductivity, rendering them ideal for sensing applications. This review systematically elucidates the construction and properties of c-MOFs across microscopic crystalline and macroscopic micro-nano structural scales. Special emphasis is placed on the structural design and regulation of c-MOFs for analytical sensing, and the intrinsic structure-performance relationship is clarified to achieve higher sensitivity, selectivity, response speed, and long-term stability, as well as other performance metrics. Finally, we comprehensively summarize the typical applications of c-MOFs-based sensors, covering environmental and safety monitoring, photoelectric detection, and health monitoring and diagnosis. At the same time, the key challenges existing in this field, such as the controllable preparation of high-quality single-crystal materials, the theoretical analysis of intrinsic electrically conductive mechanisms, and the balance between macroscopic material stability and the processing performance of devices, were evaluated. The future research directions should focus on developing new ligands and metal combinations to optimize the band structure, deepening the exploration of the mechanisms of emerging physical effects such as piezoelectricity, and promoting the integration and application of materials in practical scenarios such as flexible electronics and wearable devices.