SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4312-8
Carbazole phosphonic acid-based self-assembled molecules (SAMs) serve as effective hole-selective contacts in organic solar cells (OSCs), yet their molecular packing and aggregation behavior during solution processing remain difficult to control, limiting hole transport and device durability. This study introduces a polymer-templated self-assembly strategy to regulate molecular organization by one-step spin-coating a blend of [2-(9H-carbazol-9-yl)ethyl]phosphonic acid (2PACz) and PEDOT:PSS. The polycationic PEDOT+ framework acts as a template, providing supplementary anchoring interactions that promote ordered molecular arrangement and suppress unfavorable agglomeration. Pronounced face-on orientation and enhanced structural coherence of 2PACz within the polymer matrix are evidenced. The templated ordering improves vertical charge transport, interfacial homogeneity, and film morphology. In binary OSCs based on PM6:BTP-eC9, the hybrid hole transport layers (HTLs) yield a champion power conversion efficiency (PCE) of 20.26%, with an open-circuit voltage (VOC) of 0.874 V, a short-circuit current (JSC) of 28.97 mA cm-2, and a fill factor (FF) of 80.02%. Devices incorporating hybrid HTLs exhibit exceptional operational stability, retaining over 90% of initial PCE (T90) after 405 h of continuous operation at the maximum power point (MPP). This work establishes polymer-directed SAM assembly as a scalable route to simultaneously optimize nanoscale molecular packing, interfacial energetics, and long-term device stability for high-performance OSCs.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4138-5
Electrocoagulation (EC) has emerged as a promising electrochemical technology for wastewater treatment, offering distinct advantages over conventional chemical coagulation and membrane processes. This review systematically summarizes recent advancements in EC, focusing on the underlying mechanisms, key operating parameters, and diverse technical applications. The EC process involves three stages: electrolytic oxidation and in-situ coagulant formation, destabilization of contaminants, and floc formation. Unlike chemical coagulation, EC requires no external chemical additives, and process control is achieved by adjusting current density, voltage, or electrode materials, enabling adaptation to varying wastewater qualities. The review highlights the influence of dissolved organic matter (DOM) on EC efficiency, as clarified by Luo et al. (Water Research, 2025). Furthermore, it discusses reactor design innovations, including continuous-flow and cascade-type configurations, and the role of current waveforms in mitigating electrode passivation. The integration of EC with membrane bioreactors and forward osmosis is also examined, demonstrating enhanced treatment performance and fouling mitigation. Key challenges, such as energy consumption and electrode scaling, are addressed, along with future research directions. This comprehensive analysis provides a critical framework for optimizing EC systems and scaling them for industrial wastewater treatment, emphasizing the need for holistic reactor design and process integration to achieve sustainable water reuse.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4217-y
Rational design and construction of effective photocatalysts is a promising way for green and sustainable chemistry, but still a great challenge. Herein, taking triphenylamine-containing aldehydes as reactants, two covalent triazine frameworks (CTFs), tris(4-formylphenyl)amine (TPA)-CTF and tris(4-formylbiphenyl)amine (TBPA)-CTF, were rationally constructed. The strong electron donor property of the triphenylamine moieties derived from the initial reactants and the strong electron acceptor nature of the in-situ formed built-in triazine rings in CTFs endowed these robust triphenylamine-based CTFs with donor-acceptor (D-A) or donor-π-acceptor (D-π-A) structure features. Photocatalytic experiments revealed that, compared with the controlled phenyl analogue CTF, 1,3,5-tri(p-formylphenyl)benzene (TFPB)-CTF, both of the triphenylamine-based CTFs exhibited superior photocatalytic activity not only in photocatalytic hydrogen peroxide generation, but also in photocatalytic aerobic oxidations of diverse organic substrates. Theoretical studies further confirmed that their enhanced photocatalytic performance should be attributed to their unique D-A or D-π-A features in the constructed triphenylamine-based CTFs. This work successfully demonstrated that rational selection of reactants containing electron donor moieties to construct CTFs should be a reliable way for the construction of effective photocatalysts for photocatalytic oxidation reactions.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3637-6
Traditional optical fiber communication encryption methods lack sufficient dynamic adaptability and hardware flexibility, while reconfigurable logic gates can overcome this limitation, thereby significantly improving the flexibility of encryption systems. This study reports a reconfigurable optoelectronic logic gate (OELG) system based on hafnium-zirconium oxide (HZO) ferroelectric thin films. Through ultra-low temperature atomic layer deposition technique, the fabricated HZO thin films demonstrate an exceptional pyroelectric coefficient of 1835.91 μC m−2 K−1 and robust multi-level polarization stability, enabling efficient broadband photon-to-current conversion. By leveraging the pyroelectric effect and tunable polarization states, the OELG device achieves dynamic optical signal modulation and logic processing. The OELG device supports five fundamental logic operations (AND, OR, NAND, NOR, NOT) via electrical bias and polarization control, without requiring hardware modifications. The OELG device demonstrates stable performance over 10^9 cycles with no degradation, meeting practical application requirements. Furthermore, a convolutional neural network (CNN)-integrated image encryption-decryption framework was validated, achieving 95.01% recognition accuracy on decrypted data, while unauthorized decryption attempts resulted in significant feature loss. This study addresses security challenges in optical communication networks by proposing an innovative solution that integrates pyroelectric materials with reconfigurable logic gate technology, offering a new pathway to enhance physical-layer security.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3761-7
Ruthenium-based materials, including metallic Ru and RuO2, are promising electrocatalysts for electrochemical water splitting (EWS) due to their high activity for both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). However, their practical application is hindered by the relatively strong adsorption of reaction intermediates on Ru surfaces and the oxidative dissolution of RuO2 under operating conditions. This review provides a comprehensive overview of recent progress and challenges in Ru-based electrocatalysts for EWS. We first summarize the fundamentals of EWS, including reaction mechanisms and activity descriptors. Then, we detail typical synthesis methods such as hydrothermal/solvothermal syntheses, organic ligand-assisted syntheses, pyrolysis, acid etching, cation exchange, and molten salt-assisted syntheses. Subsequently, we focus on enhancement strategies, including alloying, doping, structure design, interface engineering, single-atom catalyst design, high-entropy alloy design, phase engineering, and defect engineering, with typical examples illustrating structure-property correlations. Finally, we address remaining challenges and future prospects for the development of efficient and durable Ru-based electrocatalysts for sustainable hydrogen production.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025101901
Hexachlorobutadiene (HCBD) is a persistent organic pollutant (POP) regulated under the Stockholm Convention. Chlorinated chemical production processes are major sources of unintentional HCBD emissions, posing potential threats to ecosystems and human health. This study systematically reviews the formation, emission, and environmental impact of HCBD from such processes. HCBD is widely generated as a by-product during chlorination stages of producing carbon tetrachloride, dichloroacetylene, tri-/tetrachloroethylene, and chlorobenzene, via free-radical mechanisms. It is released through waste gas, wastewater, and solid waste. In the environment, HCBD exhibits multimedia distribution, undergoing long-range atmospheric transport and adsorbing onto soil and sediments, thereby becoming secondary pollution sources. HCBD shows significant bioaccumulation and food-chain magnification; it is toxic to aquatic organisms and causes hepatic and renal damage with potential carcinogenicity in mammals. Effective pollution control requires combined process improvements and end-of-pipe treatments, supplemented by stringent emission standards and life-cycle management. Future research should focus on developing precise emission inventories, elucidating multi-media transport and transformation mechanisms, and assessing composite ecotoxicological effects, thereby providing scientific support for implementing international conventions and formulating effective prevention strategies.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3933-9
The global cold chain consumes vast amounts of energy and emits greenhouse gases, while many regions lack proper refrigeration. To address this, we developed a dual-layer electrospun membrane (PZ-PML) for energy-free fruit preservation. The top PVDF-HFP/ZIF-8 layer offers 97.64% solar reflectance and 92.5% mid-infrared emissivity, providing 70 W/m2 radiative cooling. The bottom PAN/MIL-101/LiCl layer, with 2.18 g/g water uptake at 80% RH, delivers ~156 W/m2 evaporative cooling, lowering surface temperature by 6.1 °C under ~400 W/m2 irradiation. The membrane also shows ≥99% antibacterial efficiency against E. coli and S. aureus. Applied to strawberries, it reduced dehydration to 20.2% after 9 days, compared to 68.2% and 74.4% in controls. Additionally, it demonstrates durability, superhydrophobicity, and UV stability. This scalable solution offers energy-free fruit cooling, reducing postharvest losses while maintaining quality and safety.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4178-y
Rational design of metal–nitrogen–carbon (M–N–C) single-atom catalysts (SACs) for selective CO2 electroreduction is still largely guided by first-shell coordination engineering, while the catalytic impact of the surrounding non-coordinated “second-shell” microenvironment remains underexplored. Here, we show that tailoring the peripheral nitrogen microenvironment can decisively switch product selectivity in Cu-based SACs, even with an identical Cu–N4 first-shell motif. Using a polymer coordination strategy, pyrrolic-N–regulated Cu–Npr–C and pyridinic-N–regulated Cu–Npy–C exhibit strikingly divergent behaviors: Cu–Npr–C selectively produces formate with 72.6% Faradaic efficiency (FE) at −0.7 V vs. RHE and sustains >67% FE over 10 h, whereas Cu–Npy–C predominantly drives H2 evolution (up to 69% FE). In situ attenuated total reflection surface enhanced infrared spectroscopy captures an earlier emergence of the key HCOO* intermediate on Cu–Npr–C, evidencing accelerated formate-pathway kinetics enabled by the pyrrolic microenvironment. Density functional theory calculations further support that pyrrolic second-shell regulation promotes the O-bound formate route while disfavoring hydrogen adsorption, whereas the pyridinic microenvironment renders H adsorption more competitive and biases the reaction toward hydrogen evolution reaction. Extending this second-shell strategy to Ni SACs confirms its generality: Ni–Npy–C achieves 96.8% CO selectivity, while Ni–Npr–C shows mixed CO/H2 production. This work establishes second-shell microenvironment regulation as a general and actionable design principle for steering selectivity in M–N–C SACs toward targeted CO2 reduction products.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3905-9
Heteroatom doping is a widely adopted strategy to enhance the electrocatalytic activity of transition metal compounds, yet the intrinsic role of dopants beyond conventional electronic effects remains unresolved. This study reveals a missed heteroatom-doping effect using a graphene-supported Co-doped FeS2 catalyst for the oxygen evolution reaction (OER). Comprehensive characterization and in situ Raman spectroscopy demonstrate that Co incorporation disrupts S–S bond symmetry and orbital matching within FeS2, generating abundant S2− species that accelerate surface reconstruction into active FeOOH under electrochemical conditions. After reconstruction, Co atoms remain integrated within the FeOOH lattice, upshifting its d-band center and optimizing oxygen intermediate adsorption, as confirmed by theoretical calculations. This dual functionality of Co dopants—facilitating rapid reconstruction in the pre-catalyst and modulating the electronic structure of the active phase—provides novel mechanistic insights into dopant-induced dynamic reconstruction for electrocatalysis. The findings challenge the conventional understanding of doping effects and offer a rational design principle for Fe-based OER electrocatalysts, potentially lowering overpotentials and improving stability for practical water splitting.