SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4500-8
Electroreduction of CO2 to ethylene offers a promising route for renewable electricity storage, yet achieving high ethylene selectivity at industrial current densities remains challenging due to the large energy barrier for C–C coupling. Here, we report a “MOF-assisted in situ doping” strategy to introduce the oxophilic nonmetal phosphorus (P) into the copper oxide (CuO) lattice, constructing a localized Cu–P dual-site adsorption configuration for the key *OCCHO intermediate. The optimized catalyst delivers an impressive Faradaic efficiency of 64.6% for ethylene with a partial current density of 646 mA cm-2. Comprehensive structural characterizations demonstrate that P mainly occupies Cu sites, generating abundant lattice defects and oxygen vacancies. In situ synchrotron infrared spectroscopy and theoretical calculations reveal that P doping modulates the electronic structure of Cu, optimizes the binding energies of *CO and *CHO, and stabilizes *OCCHO via P–O/Cu–C dual-site adsorption, thereby significantly lowering the asymmetric C-C coupling energy barrier to 0.74 eV. This work highlights a dual-site microenvironment regulation strategy for CO2-to-ethylene electroreduction.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4312-8
Carbazole phosphonic acid-based self-assembled molecules (SAMs) serve as effective hole-selective contacts in organic solar cells (OSCs), yet their molecular packing and aggregation behavior during solution processing remain difficult to control, limiting hole transport and device durability. This study introduces a polymer-templated self-assembly strategy to regulate molecular organization by one-step spin-coating a blend of [2-(9H-carbazol-9-yl)ethyl]phosphonic acid (2PACz) and PEDOT:PSS. The polycationic PEDOT+ framework acts as a template, providing supplementary anchoring interactions that promote ordered molecular arrangement and suppress unfavorable agglomeration. Pronounced face-on orientation and enhanced structural coherence of 2PACz within the polymer matrix are evidenced. The templated ordering improves vertical charge transport, interfacial homogeneity, and film morphology. In binary OSCs based on PM6:BTP-eC9, the hybrid hole transport layers (HTLs) yield a champion power conversion efficiency (PCE) of 20.26%, with an open-circuit voltage (VOC) of 0.874 V, a short-circuit current (JSC) of 28.97 mA cm-2, and a fill factor (FF) of 80.02%. Devices incorporating hybrid HTLs exhibit exceptional operational stability, retaining over 90% of initial PCE (T90) after 405 h of continuous operation at the maximum power point (MPP). This work establishes polymer-directed SAM assembly as a scalable route to simultaneously optimize nanoscale molecular packing, interfacial energetics, and long-term device stability for high-performance OSCs.
Nano Research Energy•2026•DOI: 10.26599/NRE.2025.9120181
Solid-state lithium metal batteries (SLMBs) demand quasi-solid polymer electrolytes (QSSPEs) that simultaneously deliver high ionic conductivity, interfacial stability, and oxidative resistance. This study reports a QSSPE membrane (MP46) formulated with MG30:LiTFSI:succinonitrile at a 10:4:6 weight ratio, exhibiting a wide electrochemical window of 5.1 V. Complementary infrared spectroscopy, small-angle X-ray scattering, and electron microscopy reveal a hierarchical ionic conductive network consisting of sphere-like nanostructures embedded within microphase-segregated architectures. This morphology enhances lithium-ion transport while preserving mechanical integrity. The strong interfacial adhesion between MP46 and lithium metal enables stable lithium plating and stripping for over 800 h at 0.2 mA·cm–2, effectively mitigating dendrite formation. When paired with LiFePO4 and LiCoO2 cathodes, MP46 sustains prolonged cycling, retaining 80.1% capacity after 1400 cycles at 2 C and 92.1% after 200 cycles at 4.5 V, respectively. Pouch-type cells further demonstrate mechanical flexibility and operational safety under deformation. These results establish MP46 as a viable candidate for stable high-energy-density SLMBs, offering fundamental insights into the design of next-generation polymer electrolytes.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4201-0
Open fracture fixation faces dual critical challenges: bacterial infection and impaired bone healing. This study presents a rationally designed biomacromolecular network coating (Ti-GOED) on titanium alloy bone plates to simultaneously address these issues. The coating integrates antimicrobial and osteogenic components, achieving an optimal balance between antibacterial efficacy and biocompatibility. In vitro assays demonstrated that Ti-GOED eliminates over 99% of common pathogenic bacteria by inhibiting peptidoglycan synthesis, disrupting bacterial cell wall formation, compromising membrane integrity, and leading to intracellular DNA leakage and bacterial death. Concurrently, Ti-GOED enhances the proliferation and osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs) via activation of the PI3K-Akt and HIF-1 signaling pathways. In vivo animal experiments confirmed strong antibacterial and osteogenic properties. This work provides a strategy for developing antibacterial coatings on medical devices, with significant potential for preventing and treating infections post-fracture fixation.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3863-x
Lead-free double perovskites are promising for optoelectronic applications due to their tunable optical properties, stability, and non-toxicity. However, achieving efficient ultrabroadband near-infrared (NIR) emission and X-ray radioluminescence (RL) simultaneously remains challenging. Here, we report a Mo4+-doped Cs2(Na0.4Ag0.6)InCl6 double perovskite that exhibits efficient blue-light-excitable NIR emission with a near-unity photoluminescence quantum yield. The emitter demonstrates robust thermal stability, retaining 84% of its initial emission intensity at 420 K relative to 300 K. Under X-ray irradiation, the material shows bright NIR RL with a high light yield of 39,400 ± 1100 photons/MeV. A flexible film of Mo4+-doped Cs2(Na0.4Ag0.6)InCl6/polydimethylsiloxane (PDMS) was fabricated and applied as an NIR light source and X-ray scintillator. A dual-functional platform for cooperative NIR and X-ray imaging was established using a bullfrog palm as the target, achieving pixel-level fusion of NIR and X-ray images without spatial mismatch or complex image processing. The fused image simultaneously visualizes blood vessels and skeleton textures under the skin tissue. This work provides a viable strategy for lead-free double perovskites in advanced optoelectronic devices, particularly for multispectral imaging.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202607011
Anaerobic digestion (AD) is a viable route for energy recovery from food waste (FW), yet it often suffers from process instability due to volatile fatty acids (VFAs) accumulation and subsequent pH drop. This study modified red mud (RM) with hydrochloric acid to produce acid-modified red mud (AMRM), aiming to optimize its alkalinity and physicochemical properties. The efficacy of AMRM as an additive in FW anaerobic digestion was systematically evaluated. Results demonstrated that adding 3% AMRM significantly enhanced the buffering capacity and controlled VFAs accumulation, particularly propionic acid. This was attributed to the developed pore structure of AMRM, whose specific surface area increased by 347% compared to raw RM, facilitating rapid VFAs adsorption. Furthermore, AMRM enriched hematite (Fe2O3), which elevated electron transport system (ETS) activity and coenzyme F420 content, suggesting its role as an electron carrier promoting direct interspecies electron transfer (DIET) between syntrophic bacteria and methanogens. Consequently, the cumulative methane yield reached 633.9 mL/g VS, which was 175.1% and 55.2% higher than the control and raw RM groups, respectively. The VS removal efficiency was 75.1%. This study provides a dual-pathway mechanism—adsorption and electron transfer—for enhancing AD performance, offering a cost-effective and sustainable strategy for FW treatment and RM valorization.