SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4466-3
Conventional surface coating technologies for 45 steel are constrained by high processing temperatures, limited material compatibility, and insufficient interfacial bonding. This study introduces ultrasonic vibration-assisted mechanical coating (UVAMC) as a low-temperature deposition route that mitigates these limitations. The process yields a chromium coating on 45 steel with a nanoscale elemental interdiffusion transition layer at the interface, achieving a bonding strength of 66.0 MPa. The coating delivers improved corrosion resistance in aggressive environments while preserving the substrate's original compressive and tensile strength. The method also demonstrates broad process adaptability, successfully depositing copper, aluminum, and 316 stainless steel powders, and forming complex shapes such as the "SZU" pattern. These results establish UVAMC as a viable surface functionalization strategy for metallic materials, combining efficient deposition with operational flexibility.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4028-5
The escalating thermal management demands of modern electronics necessitate materials with superior thermal conductivity and matched thermal expansion. Cu/Diamond composites are promising, yet their fabrication typically requires extreme conditions (high temperature/pressure) or complex coating processes. This work introduces a one-step, heat-source-free cold manufacturing method using ultrasonic vibration to consolidate Cu/Diamond composites at room temperature and a low pressure of ~16 MPa within seconds. The applied pressure is reduced by 200–500 times, and the required temperature is only 20% of that used in conventional high-temperature high-pressure sintering. Direct metallurgical bonding at Cu-Cu interfaces and solid embedding of diamond particles in the Cu matrix are achieved, yielding a composite with a high yield strength of 150 MPa. The method enables a maximum diamond proportion of ~60%, resulting in a thermal conductivity exceeding 1043 W/(m·K) and a coefficient of thermal expansion below 10×10⁻⁶ K⁻¹. Complex shapes are readily fabricated, and heat dissipation tests demonstrate superior performance compared to commercial Al₂O₃ and AlN substrates. The loose preparation conditions and rapid processing confer significant industrial production potential.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202511041
Hydroxyl radicals (·OH) generated via dark reactions under fluctuating redox conditions significantly influence pollutant degradation and elemental cycling, yet the key electron supply mechanisms driving their sustained production remain unclear. This study aimed to elucidate the electron-driven processes underlying sustained dark ·OH generation in mangrove soils under redox fluctuations. Simulated tidal redox cycles were conducted, and electron donating capacity (EDC), three-dimensional fluorescence spectroscopy, nuclear magnetic resonance, and high-throughput sequencing were employed to analyze the dynamics of different Fe(II) species, key organic matter components, and microbial communities. Results demonstrated that, without exogenous electron donors, mangrove soils exhibited stable ·OH generation potential and EDC. During early redox cycles, total EDC of soil suspensions was dominated by reactive Fe(II), while the contribution of reduced organic matter increased over time, with solid-phase components accounting for 94.5%–97.6% of total EDC. Humic acids in soil organic matter facilitated reversible electron transfer via quinone functional groups, maintaining redox activity. Geothermobacter and Desulfobulbus were identified as dominant iron-reducing bacteria, likely key microorganisms for regenerating the "iron-organic matter" electron sources. This study reveals the mechanisms of endogenous electron donor regeneration and sustained dark ·OH generation mediated by iron and organic matter cycling in mangrove soils, providing theoretical support for understanding the long-term environmental effects of ·OH in tidal environments and its impact on biogeochemical cycles.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4332-3
This correction addresses an error in the affiliations of the authors of the article 'Intrinsic pseudocapacitive Na0.44MnO2 prepared by novel ion-exchange method for high rate and robust sodium-ion batteries' originally published in Science China Materials, volume 66, issue 10, 2023, pages 3810–3816. In the original publication, one affiliation of the first author (Yuge Cao) was missing, and the affiliations of the authors were incorrectly labeled. The corrected affiliations are as follows: Yuge Cao is affiliated with the State Key Laboratory of High-Performance Ceramics and Superfine Microstructures, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050, China; the Beijing National Laboratory for Molecular Sciences and State Key Laboratory of Rare Earth Materials Chemistry and Applications, College of Chemistry and Molecular Engineering, Peking University, Beijing 100871, China; and the Center of Materials Science and Optoelectronics Engineering, University of Chinese Academy of Sciences, Beijing 100049, China. The other authors' affiliations are also corrected accordingly. The corresponding authors are Hui Bi ([email protected]) and Fuqiang Huang ([email protected]). This correction does not affect the scientific content of the original article.