SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4315-2
High-temperature X-ray imaging demands scintillators with high crystallinity, efficient scintillation, and robust thermal stability, yet suitable materials remain scarce. Here, we report an ultra-high-crystallinity transparent glass-ceramic (GC) scintillator strategically designed via controllable heat-treatment-induced crystallization. A sequential precipitation method is employed, where cubic CaF2 nanocrystals initially form, subsequently promoting heterogeneous nucleation and growth of hexagonal BaAl2Si2O8. Intrinsic nanoscale phase separation into F-rich and O-rich domains significantly reduces atomic diffusion distances, yielding an unprecedented crystallinity of up to 97.6%. Notably, defect traps (oxygen vacancy defects, likely located within the lattice or at crystalline/amorphous interfaces) enable efficient carrier capture and thermally stimulated release, contributing to remarkable resistance to thermal quenching. Consequently, the GC scintillator maintains 90.6% of its integrated X-ray excited luminescence (XEL) intensity at 300 °C, with the integrated XEL intensity reaching 94.2% of commercial Bi4Ge3O12 (BGO) at room temperature. This enables stable high-temperature X-ray imaging with a spatial resolution of ~10.4 lp mm−1 up to 225 °C. This work provides a versatile pathway for developing high-sensitivity scintillators for extreme-environment X-ray imaging.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4212-x
Idiopathic pulmonary fibrosis (IPF) is a lethal interstitial lung disease with limited therapeutic options. Current treatments, such as nintedanib and pirfenidone, target downstream fibrosis but fail to address the upstream drivers, including persistent alveolar epithelial injury and abnormal repair. This study presents an inhalable, reactive oxygen species (ROS)-responsive liposomal system (SAB/GC-1@Lip-cRGD) that co-delivers the antioxidant salvianolic acid B (SAB) and the thyroid hormone receptor β (TRβ) agonist Sobetirome (GC-1). The liposomes are surface-modified with cRGD peptides for targeted delivery to fibrotic lesions and possess a negative surface charge to enhance mucus penetration. In the high-ROS fibrotic microenvironment, the liposomes destabilize, releasing SAB and GC-1. SAB scavenges ROS to remodel the fibrotic niche, while GC-1 reactivates TRβ signaling, driving the differentiation of stalled Krt8+ transitional epithelial cells into functional alveolar type I (AT1) cells. In a mouse model of pulmonary fibrosis, SAB/GC-1@Lip-cRGD significantly reduced pro-inflammatory cytokines (TNF-α, IL-1β, IL-6) and TGF-β1 in bronchoalveolar lavage fluid and lung homogenates. The proportion of CD206+ M2 macrophages decreased from 27.4% in the model group to 6.2% after treatment, indicating potent anti-inflammatory and anti-fibrotic effects. This synergistic strategy of microenvironment remodeling and epithelial regeneration achieved robust collagen depletion, restoration of alveolar integrity, and recovery of pulmonary function, outperforming single-drug or non-targeted formulations. The work provides a generalized paradigm for integrating microenvironment regulation with regenerative repair in pulmonary diseases.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4151-2
The rapid increase in atmospheric CO2 due to fossil-fuel consumption has heightened the demand for efficient carbon capture and utilization technologies. Ionic liquids (ILs) have emerged as versatile media and catalysts for CO2 conversion, offering advantages such as negligible volatility, wide electrochemical windows, and strong CO2 affinity. However, the vast design space of ILs and limited experimental data make traditional trial-and-error screening inefficient. This review summarizes recent advancements in applying machine learning (ML) to the design and screening of ILs for CO2 conversion. The roles of ILs in catalytic processes and the limitations of traditional screening methods are discussed. ML-based workflows are explored, with emphasis on addressing challenges posed by small and noisy datasets. Finally, future opportunities in mechanism-informed descriptors, multi-objective optimization, and the integration of domain expertise with data-driven approaches are highlighted to accelerate the discovery of next-generation ILs for sustainable CO2 conversion.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4232-1
Polyanionic cathode materials are widely considered as potential cathode materials for sodium-ion batteries due to their strong three-dimensional framework and intrinsic thermal safety. Nevertheless, the limitation of the specific capacity and energy density hindered their application, which can be ascribed to the common reliance of single-electron redox reaction of the transition metal. By realizing the reversible double redox reaction of vanadium-based and manganese-based polyanion cathodes, researchers have successfully opened up a new way to break through the long-term performance limitations. Recent studies disclose that vanadium and manganese-based polyanionic cathodes exhibit the possibility of realizing a reversible double-redox reaction, which opened up new avenues to overcome the capacity dilemma. However, many fundamental issues remain unclear, including insufficient structural stability at high operating voltages, irreversible structural evolution induced by sodium extraction, sluggish electronic and ionic transport kinetics, and Jahn–Teller distortion. Therefore, it is imperative to summarize recent work in order to clarify the pathway for future investigation. In this review, the key challenges associated with the activation of the double-redox reaction are outlined, followed by the realization and regulation of the double-redox reaction in polyanionic cathode materials. A systematic summary of recent studies is performed for both vanadium and manganese-based compounds, which could contribute to the fundamental understanding of the double-redox reaction mechanism. Combined with the modification strategy and future perspective, this review provides insights into the rational design of polyanionic cathodes with a reversible double-redox reaction. It also offers insights into the development of high-energy-density cathode materials for next-generation sodium-ion batteries.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3607-9
Enhancing light olefin selectivity and extending catalytic durability remain critical challenges for ZSM-5 zeolites in methanol-to-olefins (MTO) conversion, primarily due to inherent diffusion restrictions along the MFI b-axis and poor coke accommodation. Here, we report a hierarchically single-crystalline ZSM-5 sheet architecture featuring interconnected multiscale porosity and a remarkably reduced b-axis thickness (<50 nm), quantitatively verified by three-dimensional electron tomography. Real-time confocal laser scanning microscopy tracking demonstrated significantly enhanced molecular diffusivity compared to conventional micron-sized ZSM-5 (Micro-ZSM-5). This engineered structure distributes abundant aluminum sites on highly accessible diffusion pathways, achieving an enlarged coke accommodation of 16.31 wt% with a coke deposition rate of 0.59 mg g−1 h−1, only one third of that in Micro-ZSM-5. In continuous MTO operation, the hierarchical ZSM-5 sheet (Hier-ZSM-5-S) maintained an average ethylene and propene selectivity of 63.5% for 22.2 hours (WHSV = 3.6 h−1, T = 480°C), which was 19% higher and 6.5 times longer than Micro-ZSM-5, respectively. This hierarchically shortened b-axis structure establishes a generalizable paradigm for enhanced diffusion and coke accommodation in precisely designed pore systems, applicable to various reactions.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3629-3
Electrically pumped lasers with reduced physical dimensions are critical for future optical information processing, storage, and photonic integrated circuits. However, electrical injection in perovskite lasers faces challenges including material instability, non-radiative losses, and Joule heating. Here, we demonstrate an ultralow-threshold perovskite microlaser decorated with gold nanoparticles (AuNPs), enabling simultaneous optical pumping and current injection at ambient temperature. The lasing threshold is reduced to 8.6 μJ/cm², approximately 44% lower than that of pristine devices (15.3 μJ/cm²). The AuNPs, with optimized size, enhance both lasing performance and electrical properties, achieving a current injection density of 2.98 kA/cm². AuNPs accelerate hot-carrier cooling, reducing non-radiative recombination and mitigating Joule heating. The threshold decreases progressively with increasing electrical assist fraction. Stability tests confirm excellent resistance to aging and humidity, with stable lasing output under co-excitation in ambient air. This work underscores the feasibility of electrically driven perovskite microlasers, offering a pathway toward electrically pumped microlaser diodes.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3608-8
Polymeric carbon nitride (PCN) is a promising photocatalyst for H2O2 production due to its visible-light response, low cost, and high selectivity for the two-electron oxygen reduction reaction (ORR). However, its H2O2 yield is limited by narrow light absorption, low charge separation efficiency, and insufficient active sites. Here, crystalline poly(heptazine imide) (PHI)-based carbon nitride with highly dispersed In sites and N defects was prepared via an ionothermal method using LiCl/KCl molten salts. The large π-conjugated system and N defects enhance visible-light harvesting. Remaining K+ ions in nitrogen cavities act as interlayer electron channels, while N defects induce asymmetric charge distribution on the heptazine network, promoting interlayer and in-plane charge separation and transfer. In sites accelerate charge transfer dynamics and serve as active sites for ORR. The synergistic effect of metal modification and defect engineering boosts electron delocalization, significantly improving photocatalytic activity. The H2O2 production rate of 10InPHI reaches 15.3 mmol g−1 h−1 via a two-step single-electron ORR pathway, underscoring the potential of modified carbon nitride for efficient H2O2 photosynthesis.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2024112603
Sulfamethoxazole (SMX) and microplastics (MPs) are ubiquitous co-existing pollutants in aquatic environments. This study investigated the effects of polyethylene (PE), polypropylene (PP), and polystyrene (PS) MPs with varying aging degrees on the photodegradation of SMX. In the absence of MPs, SMX photodegradation was only 28%, while the presence of virgin PE increased it to 34%. Aging PE for 200, 400, and 600 h further enhanced degradation to 46%, 56%, and 77%, respectively. Pseudo-first-order kinetics showed that the rate constant (kobs) increased from 0.066 h−1 to 0.224 h−1 with aged PE. Aged MPs generated more reactive oxygen species (ROS) under irradiation, including hydroxyl radicals (·OH), singlet oxygen (1O2), and superoxide anions (O2·−), as confirmed by radical quenching and EPR analysis. Density functional theory identified the benzene ring, five-membered heterocycle, and sulfonyl group as primary ·OH attack sites. LC-MS analysis revealed degradation products such as p-aminobenzenesulfonamide, indicating both direct and indirect photolysis pathways. This work provides mechanistic insights into antibiotic-MP interactions and informs strategies for managing co-existing pollutants.
Environmental Chemistry•2026•DOI: 10.0000/202604-1
An analytical method was developed for the simultaneous determination of 11 organic ultraviolet absorbents (OUVs) in coral tissues using ultra-high performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS). Target analytes included benzophenones (BP, BP-2, BP-3, BP-8) and other common UV filters. Sample pretreatment and chromatographic conditions were systematically optimized. Coral tissue samples were extracted by combined vortexing and ultrasonication, separated on a CAPCELL PAK MG C18 column using a mobile phase of methanol-0.1% formic acid aqueous solution under gradient elution, and determined by multiple reaction monitoring (MRM) with internal standard quantification. Method validation demonstrated good linearity for all target compounds over the range of 0.1–500 μg·L−1 (R2 > 0.990), with method detection limits ranging from 0.020 to 0.133 ng·g−1. The mean recoveries at low, medium, and high spiking levels ranged from 60.5% to 120.3%, with relative standard deviations (RSDs) of 1.6%–10.7%. The method offers advantages of simple pretreatment, good repeatability, and high accuracy, making it suitable for high-throughput determination of OUVs in complex biological matrices such as corals. The method was applied to analyze 89 coral samples collected from Xidao Island, Sanya, and five target OUVs were detected in the samples. This method provides reliable technical support for elucidating the accumulation characteristics of OUVs in corals and assessing their potential ecological risks.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3928-4
Circularly polarized afterglow (CPA) materials provide an advanced optical signature to light emission, offering great potential for advanced photonic technologies. However, practical implementation remains challenging due to the lack of satisfactory performance, that is, high luminescence dissymmetry factor (g_CPA), long visualization time, and good processability. Here, we develop processable, full-color CPA materials composed of cholesteric liquid crystal polymers (CLCPs) and inorganic phosphors embedded in polymers, achieving a high g_CPA value of up to 0.74 and a long visualization time of 7 min. The materials are constructed with a bilayer structure comprising CLCPs and inorganic luminophors such as Y2O2S:Eu,Mg,Ti, SrAl2O4:Eu,Dy, and Sr2MgSi2O7:Eu. The CLCPs are synthesized from polymerizable liquid crystal monomer RM257, chiral dopants R/S5011, dipropylamine, photoinitiator Irgacure 651, cross-linker PETMP, and chain extender. The resulting materials exhibit excellent circularly polarized optics, enabling the implementation of circular polarization differential imaging (CPDI), where images are generated by subtracting two images captured through left- and right-handed circularly polarized filters. This work demonstrates the unique application of CPA in imaging, opening a new pathway for the use of purely inorganic solid-state luminophors in chiral functional materials.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202607016
Lead (Pb) is a highly toxic heavy metal that poses severe risks to environmental and human health, particularly affecting children's neurological development. This study investigates the adsorption performance and mechanisms of biochars derived from pyrolysis of Napier grass (Pennisetum purpureum), food waste digestate, and their mixtures for Pb²⁺ removal from aqueous solutions. Biochars were prepared at different mass ratios, and the optimal material (HP3SD1-B, Napier grass:digestate = 3:1) exhibited a maximum equilibrium adsorption capacity of 306.45 mg/g and a theoretical Langmuir maximum capacity of 447.62 mg/g, significantly outperforming pure digestate biochar and lower-ratio blends. Adsorption kinetics followed a three-stage profile: rapid liquid-film diffusion (0–180 min), intraparticle diffusion (180–360 min), and equilibrium at 360 min. The adsorption process was well described by the pseudo-second-order kinetic model (R² > 0.99) and the Langmuir isotherm, indicating monolayer chemisorption. Characterization via FTIR, XPS, SEM-EDS, and Zeta potential revealed that Pb²⁺ immobilization occurs primarily through surface precipitation (Pb₃(CO₃)₂(OH)₂ and PbO), complexation with hydroxyl, ether, and aromatic C=C groups, and auxiliary mechanisms including electrostatic attraction and K⁺/Mg²⁺ ion exchange. Optimal adsorption occurred at pH 6, correlating with the point of zero charge (PZC ≈ 2). This study demonstrates that co-pyrolysis of agricultural and organic solid wastes offers a cost-effective, high-performance biochar for heavy metal remediation, aligning with circular economy principles.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4079-4
Utilization of ultrahigh-nickel LiNi_xCo_yMn_1-x-yO_2 (NCM) (x > 0.97) in Li-ion batteries can distinctively boost energy density through enhanced discharge capacity. However, capacity and thermal stability deteriorate as Ni content approaches the limit. Here, we propose a facile strategy by introducing high-valence tungsten (W) into ultrahigh-nickel polycrystalline LiNi_0.98Co_0.01Mn_0.01O_2 (PCNCM98). W-doped PCNCM98 (W-PCNCM98) exhibits refined, compactly stacked primary particles, whereas PCNCM98 shows equiaxial, non-uniform larger particles. The refined microstructure enhances mechanical strength: average particle hardness of W-PCNCM98 is 104 MPa, 1.5 times higher than PCNCM98 (68 MPa). This improved mechanical property suppresses lattice volume changes and relieves microcrack formation from H2–H3 phase transition. Consequently, cycling performance in pouch-type full cells is significantly enhanced, with capacity retention of 73% after 2000 cycles at 1 C and 25 °C, 54% higher than PCNCM98. Enhanced structural stability and strong electron affinity of W6+ also improve thermal stability: exothermic peak for W-PCNCM98 is postponed to 203 °C with heat generation of 1287 J g−1, versus 190 °C and 1528 J g−1 for PCNCM98. This high-valent doping strategy stabilizes ultrahigh-nickel NCM cathodes, accelerating large-scale EV applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3946-2
High energy-density lithium–sulfur (Li–S) batteries with rapid intermediate conversion and forbidden shuttle effect require superior electrocatalysts with tunable catalytic activity. In this protocol, binary FeNi3 alloy nanoparticles homogeneously embedded within carbon nanosheets (FeNi3/CNS) are synthesized to regulate the conversions of sulfur species. Time of flight-secondary mass ion spectroscopy reveals a significantly improved catalytic effect of binary FeNi3 alloy compared to bare Ni, which is confirmed by a larger Li2S amount generated during in situ X-ray diffraction measurement. Further anode characterization validates efficient shuttling suppression and good lithium metal protection. In Li–S batteries, electrochemical tests demonstrate a remarkable rate capability of 852 mAh g−1 at 3.0 C, and outstanding long-term cycle at 1.0 C (639 mAh g−1 after 500 cycles). Even under a wide operation temperature range (−15–60 °C), Li–S batteries exhibit stable cycling with high specific capacities under high current rates. Moreover, Li–S batteries using FeNi3/CNS attain a maximum areal capacity of 5.60 mAh cm−2 under ~4.0 mg cm−2 sulfur. This study highlights the advantages of adopting binary or multi-component metal alloys as electrocatalysts and points out the research directions to advance Li–S batteries into practical applications.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60670-6
Direct conversion of syngas to higher alcohols (C2+ alcohols) is critical for coal-based resource utilization and energy security. Here, a series of Na-modified CoFe/Al2O3 catalysts were synthesized via incipient wetness impregnation and evaluated for syngas-to-alcohol reactions. Multiple characterizations (XRD, N2 adsorption-desorption, H2-TPR, XPS, DRIFTS, in situ Raman, Mössbauer spectroscopy) elucidated synergistic effects of Na and Fe promoters. Na facilitated formation of Co-Fe alloy sites during reaction, while Fe modified electronic state of Co and promoted transformation of lattice oxygen to adsorbed oxygen, increasing surface oxygen vacancies. Synergistic interaction between alloy and carbide sites enhanced CO insertion into olefin intermediates, improving C2+ alcohol selectivity. Under 260 °C and 2 MPa, Co1Fe1Na1 catalyst (n(Co):n(Fe):n(Na)=1:1:1) achieved total alcohol selectivity of 45%, with C2+ alcohols comprising 94.1% of total alcohols. This study provides insights into rational design of Co-based catalysts for efficient syngas conversion to C2+ alcohols.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202608015
Inter-basin water diversion projects can profoundly alter the water quality dynamics of receiving basins. Taking the Qincun Reservoir and its downstream reaches in the Huangze River Basin as a case study, this research quantitatively evaluates water-quality responses under multiple coordinated management measures. An integrated Environmental Fluid Dynamics Code-Soil and Water Assessment Tool (EFDC-SWAT) modeling framework was established, coupling a two-dimensional hydrodynamic-water-quality model for the reservoir with a hydrology-water-quality model for the downstream reaches. Seven management scenarios were designed to reflect various combinations of point- and non-point-source pollution control strategies. Simulations focused on spatiotemporal variations in key indicators—total nitrogen (TN), total phosphorus (TP), ammonia nitrogen (NH3-N), and permanganate index (CODMn)—and assessed pollution-load reduction effectiveness. Comparative analysis using the comprehensive water quality identification index (CWQII) revealed that under Scenario 3 (highest pollution-control standards with lowest diversion volume), TN and TP concentrations in the reservoir decreased by 80% and 50%, respectively, achieving Class II water-quality standards. Downstream TN and TP levels declined by 36% and 33%, and the CWQII improved from 4.211 to 3.410. Land consolidation contributed 77% and 45% to TN and TP load reductions in the reservoir, respectively, while a 20% reduction in diversion volume was most effective in improving downstream TN (>50%). These results demonstrate that the coupled EFDC-SWAT model effectively elucidates mechanisms through which inter-basin water diversion influences water quality in supply areas. Moreover, synergistic point- and non-point-source controls exhibit a nonlinear enhancement effect on overall water-quality improvement.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4097-3
The on-demand patterning of two-dimensional transition metal dichalcogenides (TMDs) with tailored edges is critical for electronic and optoelectronic applications but remains technically challenging. Here, we report a stress-guided anisotropic etching strategy for producing large-area, well-ordered MoS2 nanostructures, including nano-ribbons and nano-squares, without templates. By applying uniaxial cumulative stress followed by selective thermal etching, MoS2 monolayers are statistically etched into ribbon-like structures whose width inversely correlates with applied stress magnitude. The newly etched edges are macroscopically straight or serrated, predominantly Mo-zigzag terminated, and enhance photoluminescence by a factor of ~8.0. The edge type depends on the angle between stress direction and crystallographic orientation, corroborated by theoretical calculations. Biaxial stressing generates well-defined nano-squares, offering a scalable, versatile patterning route for engineering 2D materials with tailored functional edges, promising for electrocatalytic and optoelectronic applications.