SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4277-1
Two-dimensional (2D) magnetic materials hold promise for next-generation spintronics, yet most exhibit Curie temperatures (Tc) far below room temperature, limiting practical applications. Here, we report the realization of room-temperature ferromagnetism in CuCrSe2 nanosheets via controlled anion removal achieved by post-synthetic vacuum annealing. Raw CuCrSe2 shows a low Tc of ~120 K, whereas annealed CuCrSe2 (A-CuCrSe2) nanosheets exhibit robust ferromagnetic ordering above 300 K. Structural and compositional analyses, including transmission electron microscopy, Raman spectroscopy, and X-ray absorption spectroscopy, confirm that A-CuCrSe2 retains the original layered crystal structure with an estimated Se vacancy concentration of approximately 10%. Magnetic measurements reveal room-temperature ferromagnetism in exfoliated nanosheets, corroborated by magnetic imaging and electric transport measurements. Anomalous Hall effect (AHE) measurements uncover the coexistence of two ferromagnetic phases within the same sample: one with low Tc (~120 K) and another with high Tc (>300 K), indicating spatially heterogeneous magnetic ordering driven by anion removal distribution. Density functional theory (DFT) calculations elucidate the microscopic mechanism, suggesting that Se vacancies modulate the magnetic exchange interactions, enhancing Tc. This work demonstrates that anion modulation is an effective intrinsic strategy to achieve room-temperature ferromagnetism in 2D materials, potentially advancing spintronic applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4197-4
Deep-blue organic light-emitting diodes (OLEDs) remain the most challenging primary-color emitters due to stringent exciton energy requirements. We strategically designed two innovative deep-blue emitters, SCZ-4AnCN and STPA-4AnCN, via systematic functionalization of an anthracene core with arylamino-decorated spirofluorene donors and cyano-substituted phenyl acceptors. Comprehensive theoretical and experimental analyses demonstrate that these spirofluorene-anthracene hybrids adopt precisely engineered distorted configurations, effectively suppressing detrimental intermolecular π–π stacking in condensed phases. The sp3-hybridized bridgehead carbons in spirofluorene units play a pivotal role by simultaneously restricting π-conjugation extension and fine-tuning donor–acceptor interactions, thereby stabilizing the lowest excited singlet (S1) state with dominant local excitation (LE) character. This molecular engineering yields exceptional deep-blue emission with remarkable efficiency. Notably, the materials exhibit unique high-lying reverse intersystem crossing (hRISC) behavior, enabling efficient triplet harvesting. Optimized doped devices incorporating SCZ-4AnCN achieve outstanding performance, including a maximum external quantum efficiency (EQE_max) exceeding 10% and CIE coordinates (0.154, 0.052) approaching the BT.2020 blue standard. Nondoped devices maintain impressive performance with an EQE_max of 7.51% and superior operational stability, demonstrating less than 10% efficiency roll-off at 1000 cd m−2. This work validates anthracene-based molecular architectures for deep-blue electroluminescence and establishes a transformative design paradigm for next-generation OLED emitters.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202605021
The digestate from anaerobic digestion of food waste is separated into solid residue and liquid filtrate. The filtrate retains high nutrient and carbon content, making it a viable resource for recovery. This study prepared biochar from food waste digestate residue and employed it as an electrode active material in a flow-electrode capacitive deionization (FCDI) system, with activated carbon as a control, to assess nitrogen and phosphorus removal from kitchen waste biogas slurry. ZnCl₂ modification significantly enhanced the biochar's specific surface area, adsorption capacity, capacitance, and conductivity. The optimal mass fraction of modified biochar in the electrode liquid was 7.5%. In simulated digestate, the FCDI system achieved removal efficiencies of 47.7% for NH₄⁺-N and 55.2% for reactive phosphorus (RP) over 12 hours. Performance ranking of electrode materials was activated carbon > ZnCl₂-modified biochar > unmodified biochar. In continuous operation with actual anaerobic digestion filtrate, maximum removal efficiencies were 32.2% for NH₄⁺-N and 26.2% for RP. The reduced performance in real digestate is attributed to organic foulants such as peptides and amino acids, which block ion-exchange membrane channels, increase membrane resistance, and impede ion transfer and charge transport, thereby diminishing deionization efficiency.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3768-8
Damping materials are critical for mitigating vibrations and noise across various frequencies by converting mechanical energy into thermal energy. However, achieving a simultaneous high damping capacity and high toughness remains a formidable challenge. Here, we report a supramolecular polymer (SMP) that integrates high damping and toughness through the synergistic action of dynamic hydrogen bonds and side-chain relaxation. The polymer exhibits exceptional mechanical properties: a Young's modulus of 47.08 MPa, elongation at break of 605%, and toughness of 15.24 MJ m−3. The dynamic hydrogen bonds confer dual responsiveness to strain rate and temperature, with a 6.7-fold variation in Young's modulus under different stretching rates and a five-order-of-magnitude change in storage modulus across a temperature range. Under mechanical force, the interpenetrating side chains undergo mutual friction, enabling repetitive energy dissipation. This mechanism yields superior damping ability with a loss factor (tanδ) of 1.6 at 1 Hz, demonstrating outstanding performance in vibration absorption and noise reduction. The material's design offers a promising strategy for developing high-performance damping materials that balance energy dissipation and mechanical robustness, suitable for applications in wearable electronics, protective equipment, and structural vibration control.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2026030202
High nitrogen (N) inputs, low N use efficiency, and substantial greenhouse gas emissions constrain sustainable double-cropping rice production in the middle and lower reaches of the Yangtze River. To evaluate whether humic acid urea (HAU) can reconcile yield stability with N reduction and carbon mitigation, a field experiment was conducted in a double-cropping rice system. Five treatments were established: conventional urea at the recommended N rate (U), HAU at the recommended N rate (HAU), conventional urea with a 20% reduction in N input (U-20), HAU with a 20% reduction in N input (HAU-20), and a no-N control (CK). Rice yield, N uptake and utilization, and the full life-cycle carbon footprint were quantified. Results showed that HAU significantly increased double-cropping rice yield by 6.46% (early rice) and 8.76% (late rice) compared to U (P < 0.05). HAU-20 maintained yield equivalent to U, while U-20 significantly reduced yield. HAU-20 significantly improved nitrogen fertilizer apparent utilization rate, agronomic efficiency, and partial factor productivity. Specifically, apparent utilization rate increased by 9.24 percentage points (early rice) and 7.80 percentage points (late rice); agronomic efficiency increased by 18.51% and 26.69%, and partial factor productivity by 22.79% and 25.58% for early and late rice, respectively (P < 0.05). Life-cycle carbon footprint was significantly reduced by 26.25% (early rice) and 40.38% (late rice) under HAU-20 compared to U, with per-unit product carbon footprint reduced by 0.22 t CO2-eq·t−1 and 0.86 t CO2-eq·t−1, respectively. The reduction was primarily attributed to decreased CH4 and N2O emissions: early rice CH4 and N2O cumulative emissions decreased by 28.92% and 44.34%, and late rice by 44.46% and 63.85% (P < 0.05). In conclusion, HAU with 20% N reduction sustains yield, enhances N use efficiency, and significantly lowers carbon footprint, offering a viable path for green and low-carbon double-cropping rice production.