SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4260-5
Lithium-sulfur batteries (LSBs) are recognized as a leading candidate for next-generation energy storage due to their high theoretical specific capacity (1675 mAh g⁻¹). However, the shuttle effect of lithium polysulfides (LiPSs) severely limits cycle life and energy efficiency. Here, we report a multi-interface engineering strategy employing a MnO₂-TiO₂@Ti₃C₂ MXene (MT@MX) heterojunction, synthesized via a facile redox reaction between MXene and KMnO₄, to modulate bidirectional polysulfide conversion. The 2D structure with high conductivity and abundant heterogeneous interfaces facilitates fast ion/electron transfer, reduces reaction energy barriers, and enhances adsorption via d-band center effects. The stepped built-in electric field (BIEF) in MT@MX lowers the migration energy barrier of LiPSs from catalytic MXene to TiO₂ and then to adsorptive MnO₂, enabling reversible migration across multi-interfaces. Optimized heterointerfaces synergistically integrate adsorption, diffusion, and catalytic conversion, yielding excellent cycling stability even at a high sulfur loading of 6.4 mg cm⁻². This work demonstrates that constructing heterojunctions with stepped BIEF offers a feasible approach to modulate interfacial diffusion and provides a new design strategy for high-performance LSB electrocatalysts.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4323-8
Sulfur-based batteries are promising for next-generation energy storage due to high theoretical capacity, natural abundance, and low cost of sulfur cathodes. However, practical implementation is impeded by sluggish sulfur redox kinetics, dissolution and migration of intermediate polysulfides, and formation of insulating discharge products. Conventional catalyst design focuses on charge distribution, adsorption energetics, and structural confinement, yet these approaches incompletely describe the complex electronic processes governing sulfur conversion. Electron spin, an intrinsic quantum degree of freedom, offers an additional dimension for modulating catalytic behavior via its influence on electronic structure and orbital interactions at catalytic interfaces. In spin-polarized systems, changes in occupation and splitting of transition-metal d orbitals can regulate d-p hybridization with sulfur species, affecting interfacial charge transfer and energetics of sulfur redox reactions. This review summarizes recent progress in elucidating and manipulating electron spin in sulfur-based battery systems. Fundamental principles connecting spin states with electronic structure and catalytic behavior are outlined, followed by experimental approaches for probing spin-related electronic properties using spectroscopic and magnetic characterization techniques. Emerging strategies for spin regulation are highlighted, including heteroatom doping, defect engineering, coordination environment modulation, chirality-induced spin selectivity, and external magnetic-field control. Remaining challenges in identifying spin effects under realistic electrochemical conditions are addressed, along with opportunities for integrating spin-related descriptors into catalyst design. Establishing quantitative relationships between spin polarization, orbital hybridization, and sulfur reaction pathways may provide new perspectives for high-performance sulfur-based batteries.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4360-7
Polarization-sensitive photodetection is critical for advanced optical communication and imaging systems, yet conventional photodetectors suffer from low on-off ratios and limited polarization discrimination. Here, we report gate-tunable PdSe2/WSe2 van der Waals heterostructures that achieve ultrahigh light on-off ratio and polarization-sensitive photodetection. The heterostructure forms a type-II band alignment, enabling efficient charge separation and self-powered operation. By applying a gate voltage, the photoresponse can be modulated, achieving an on-off ratio exceeding 10^6 under illumination. The device exhibits a high responsivity of 1.2 A/W and a specific detectivity of 10^12 Jones at room temperature. Polarization-sensitive measurements reveal a linear dichroism ratio of 2.1 at 532 nm, attributed to the anisotropic crystal structure of PdSe2. The photodetector operates over a broad spectral range from visible to near-infrared (400-1000 nm) with fast response times (rise/fall < 100 μs). The gate-tunable capability allows dynamic control of the photocurrent, enabling adaptive sensing applications. These results demonstrate that PdSe2/WSe2 heterostructures are promising candidates for high-performance, polarization-sensitive photodetectors, offering a pathway for next-generation optoelectronic devices.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4182-6
Substrate interactions dictate the epitaxial growth of low-dimensional nanomaterials, yet controlling these interfaces at the atomic scale precision remains a critical challenge. Blue phosphorene (blueP) with freestanding lattice constant, experimentally realized exclusively on Ag(111), provides a unique platform to explore this interplay. Here, we elucidate the structural evolution of blueP on Ag(111), revealing that neighboring islands are not isolated but linked by single-phosphorus-atom bridges. To manipulate the interfacial coupling, we introduce a tellurium interlayer, driving the formation of an interfacial AgTe buffer that effectively decouples the islands. By tuning the substrate temperature, we achieve the synthesis of magic-number blueP clusters with uniform size and geometry. The resulting isolated blueP nanostructures facilitate the emergence of higher-order topological corner states in triangular geometries. Our findings demonstrate that tailoring interfacial interactions offers a robust route for reshaping phosphorene nanostructures, establishing essential building blocks for next-generation topological quantum materials.
New Carbon Materials•2026•DOI: 10.1016/S1872-5805(26)61066-9
Carbon materials suffer from limited dielectric loss, resulting in poor impedance matching and inadequate microwave attenuation. To address this, hierarchical structures with synergistic loss mechanisms are sought. Here, biomass cattail serves as a sustainable precursor for nitrogen-doped carbon nanotube arrays decorated with Fe3C nanoparticles via chemical vapor deposition, yielding Fe3C@NCNTs/CMTs composites. The crystallinity, tuned by calcination temperature, critically influences microwave absorption. At 800 °C, the composite achieves a minimum reflection loss of –35.8 dB and an effective absorption bandwidth of 7.02 GHz at a thickness of only 1.7 mm, with an ultralow filler loading of 10 wt%, covering the entire Ku band and part of the X band. This performance stems from enhanced magnetic loss and multiple dielectric polarization mechanisms. The study demonstrates a promising strategy for designing biomass-derived carbon-based broadband microwave absorbers.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(25)60604-9
CO2 capture and utilization (CCU) technologies are critical for mitigating global warming and promoting resource circularity. Carbon-based materials, with tunable pore structures, abundant active sites, high specific surface area, and excellent chemical stability, show significant potential for CO2 capture and conversion. This review systematically analyzes the adsorption behaviors and performance variations of activated carbon, porous carbon, graphene, and carbon nanotubes in CO2 capture. For utilization, recent advances in catalytic applications for methanation, reverse water-gas shift (RWGS), dry reforming of methane (DRM), and alcohol synthesis are emphasized. The benefits and drawbacks of carbon materials regarding adsorption capacity, catalytic activity, and stability are evaluated, and their potential in integrated CCU technologies is discussed. Key strategies for enhancing performance through structural modulation and surface modification are elucidated. This review provides theoretical guidance for future development and large-scale implementation of carbon-based materials in CCU.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2024121201
A method for the simultaneous determination of 19 sulfonamide antibiotics in environmental aqueous samples was developed by integrating solid-phase extraction (SPE) and gel permeation chromatography (GPC) with ultra-performance liquid chromatography–triple quadrupole mass spectrometry (UPLC-MS/MS). Aqueous samples were filtered through 0.45 μm membranes, adjusted to pH 6, and treated with Na2EDTA at 2.5 mg·L−1 to mitigate matrix effects. Analytes were enriched on Oasis HLB cartridges, purified by GPC, and separated on a Hypersil GOLD C18 column (2.1 mm ID × 100 mm, 1.9 μm) using gradient elution with 0.05% (V/V) formic acid in water and methanol. Detection was performed in multiple reaction monitoring (MRM) mode with internal standard quantification. Under optimal conditions, limits of detection (LOD) and quantification (LOQ) ranged from 0.7–4.4 ng·L−1 and 2.8–17.6 ng·L−1, respectively. Recoveries from spiked real samples at 10, 200, and 400 ng·L−1 were 44.5%–102%, 47.7%–97.5%, and 51.4%–115%, with relative standard deviations (RSDs) of 1.8%–10%, 0.64%–5.9%, and 0.71%–4.6%, respectively. The method was applied to three surface waters and three municipal wastewater treatment plant effluents, detecting five sulfonamides at concentrations ranging from 1.82 to 3864 ng·L−1. The combined SPE-GPC cleanup effectively reduced matrix suppression, offering high sensitivity, precision, and robustness for routine monitoring of sulfonamide antibiotics in environmental waters.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2024102303
Fluoride-containing wastewater treatment typically relies on calcium-based precipitation and flocculation, which suffer from low compliance rates and difficult valorization of fluoride-laden sludge. This study introduces a novel bismuth upconversion luminescent glass (BULG) synthesized from Bi2O3, SiO2, Yb2O3, and Er2O3, designed for efficient fluoride removal and subsequent photocatalytic application. By varying the Bi2O3:SiO2 molar ratio, a series of BULGs with superior upconversion luminescence were obtained. Under optimal conditions (Bi3+:F− molar ratio = 1:1, pH = 2), fluoride removal efficiencies exceeded 97% for all compositions, with the 0.7:0.3 Bi2O3:SiO2 formulation achieving 99.9% removal and rapid settling of the precipitate. The fluoride removal products retained upconversion luminescence and exhibited semiconductor heterojunctions, enabling complete photocatalytic degradation of ciprofloxacin (100% within 60 min). This approach not only efficiently removes fluoride ions but also valorizes the waste into a functional photocatalyst, offering a promising strategy for fluoride-containing wastewater treatment.
New Carbon Materials•2026•DOI: 10.1016/S1872-5805(26)61109-2
Silicon-carbon (Si/C) composites are promising high-capacity anode materials for next-generation lithium-ion batteries, but their commercialization is hindered by severe volume expansion during cycling. We report a chemical vapor deposition method using the pyrolysis of silane, in which ultrafine nano-Si enters a porous carbon framework to produce kilogram-scale Si/C composites. The carbon framework with abundant micropores (~1.9 nm) confines the amorphous silicon and accommodates the volume changes of nano-Si during both lithiation and de-lithiation. The resulting Si/C composites have a 56.76% Si content and have a specific capacity of 2179 mAh g–1, a high initial Coulombic efficiency (ICE) of 93.5%, and a low specific surface area (1.32 m2 g–1). In addition to the nanoconfinement effect, the median particle size (D50, 7.3-13.0 μm) of the carbon framework was shown to control the mechanical strength, coating uniformity and Li+ transport. A D50 of 8.2 μm endows the Si/C composites with outstanding comprehensive properties. They have an excellent rate performance with a 97.0% retention at 3 C relative to 0.1 C, show only minor variations in ICE difference at 60 ℃/-20 ℃ compared with room temperature, and have a low expansion of 35.8% from the delithiated to the lithiated state. The composite was then mixed with graphite to prepare the anode, which was then paired with an NCM523 cathode to assemble pouch cells. The pouch cell retained 87.46% of its initial capacity after 1000 cycles at 1 C. Because of the low expansion of the electrode, the material avoids structural degradation during cycling and thus has an excellent long-term stability.
New Carbon Materials•2026•DOI: 10.1016/S1872-5805(26)61102-X
Silicon-carbon composites prepared by chemical vapor deposition (CVD) are promising anode materials for high-energy-density lithium-ion batteries. However, the influence of the pore structure of the porous carbon (PC) carrier on silicon deposition behavior, and the impact of surface silicon on cycling stability, remain unclear. This study systematically investigates these effects using nitrogen adsorption-desorption analysis, X-ray photoelectron spectroscopy, and thermogravimetric analysis. Porous carbons with varying pore architectures were synthesized by adjusting KOH activator ratios. Results show that increased micropore volume facilitates higher silicon mass loading, but also elevates the content of surface floating silicon due to greater silane exposure. Moderately increasing mesopores in high-microporosity carbon promotes deeper silicon deposition, reducing surface floating silicon. Excessive surface floating silicon hinders lithium-ion diffusion kinetics, leading to accumulation of active lithium, accelerated SEI growth, and electrode degradation. Electrochemical testing reveals that the optimized silicon-carbon composite maintains a high specific capacity of 693.1 mAh/g after 150 cycles at 0.5 C (900 mA/g). This work provides new insights into the development and failure mechanisms of CVD-derived silicon-carbon composite anodes, emphasizing the critical role of pore structure in mitigating surface silicon and enhancing cycling stability.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025102002
The ultraviolet/chlorine (UV/Cl2) advanced oxidation process generates multiple radical species, enabling synergistic disinfection. However, the systematic influence of UV intensity on process performance remains inadequately characterized. This study investigated UV intensities from 0.25 to 2.0 mW·cm−2, assessing chlorine photolysis kinetics, bacterial inactivation, and disinfection by-product (DBP) formation. Results demonstrate that inactivation efficiency is not solely governed by total UV energy but is co-regulated by reaction kinetics and mass transfer. Increasing UV intensity accelerated chlorine photolysis by 33.7%–277.8%, elevating steady-state concentrations of hydroxyl radicals and chlorine radicals by factors of 1.6–3.8 and 1.3–3.2, respectively, thereby enhancing initial inactivation rates. However, higher intensities reduced cumulative chlorine exposure (CT value) to 14.3%–55.7% of baseline, causing overall inactivation to first increase then decrease. At a fixed UV dose of 150 mJ·cm−2, an intensity of 1.0 mW·cm−2 achieved optimal 6.5-log inactivation of Escherichia coli and the lowest bacterial reactivation rate (0.07%). Common water constituents (HCO3−, Cl−, natural organic matter) inhibited disinfection, with natural organic matter exerting the strongest suppression (2.7-log reduction). Notably, 1.0 mW·cm−2 exhibited the greatest resistance to interference. Elevated intensity reduced total organic halogen formation from 33.7 μg·L−1 to 19.0 μg·L−1. Balancing disinfection efficacy and DBP risk, 1.0 mW·cm−2 is identified as the optimal UV intensity for the UV/Cl2 process in sand-filtered water treatment.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025111302
High-concentration chloride ions (Cl−) in industrial wastewater cause severe corrosion and environmental hazards. Conventional removal methods suffer from low efficiency, high cost, and difficulty in product recovery. This study fabricated porous metallic bismuth-based blocks (Bi-PM) via 3D printing, combining chemical precipitation with additive manufacturing. Systematic evaluation of Cl− removal under varying pH and light irradiation revealed that at pH 0.1 and 0.5, dark-condition efficiencies were 53.6% and 31.0%, respectively, increasing to 69.3% and 38.1% under light. Radical trapping identified photogenerated holes as the primary active species, oxidizing metallic Bi to release Bi3+ and enhance precipitation. At pH 0.5, Bi-PM exhibited balanced efficiency and structural stability; over five cycles, average removal efficiency was 25% in darkness versus 41.2% under light, with superior stability under illumination. XRD and SEM confirmed abundant BiOCl formation on the surface under light, mitigating Bi loss. This approach ensures high chloride removal while minimizing material degradation, offering a novel pathway for industrial wastewater treatment.
Environmental Chemistry•2026•DOI: 10.0000/202605-1
A method for the determination of hydrazoic acid and sodium azide in workplace air was established using ion chromatography with suppressed conductivity detection. Vapor and mist states of hydrazoic acid were collected in 40 mg·L−1 KOH absorption solution, while sol states of hydrazoic acid or sodium azide were collected on microporous membranes and eluted with 40 mg·L−1 KOH. Separation was performed on a Dionex IonPac™ AS11-HC (250 mm × 4.0 mm) anion analytical column with KOH gradient elution, followed by suppressed conductivity detection. The azide ion (N3−) exhibited good linearity in the range of 0.005–0.5 mg·L−1, with a correlation coefficient (r) of 0.9997. The limit of detection (S/N=3) was 0.002 mg·L−1, and the limit of quantification (S/N=10) was 0.005 mg·L−1. The minimum quantifiable concentrations in air were 0.00256 mg·m−3 for hydrazoic acid and 0.00387 mg·m−3 for sodium azide, based on a 10.0 mL sample solution and a 20 L air sample. Spiked recoveries ranged from 92.0% to 100.4%, with relative standard deviations (RSD, n=6) between 0.76% and 2.51%. The method is efficient, accurate, and sensitive, suitable for monitoring and safety assessment of hydrazoic acid and sodium azide in workplace air.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4053-5
The rapid and efficient removal of radioactive iodine species from water is critical for nuclear waste treatment, particularly given the short half-life of 131I (8.02 days). Traditional porous inorganic materials exhibit low uptake capacities (<1 g g−1), while porous frameworks such as MOFs and COFs achieve high capacities (>5 g g−1) but suffer from slow removal kinetics, often requiring hours to capture 80% of iodine. This study introduces nonporous naphthobipyrrole-based organic cages (NBP-Cages) that demonstrate ultrafast iodine removal from water. Among the materials tested, type-II Me-NBP-Cage and Et-NBP-Cage, prepared via reprecipitation, exhibit amorphous morphology with small particle sizes (2–6 μm) and low BET surface areas (33.4 and 2.3 m2 g−1, respectively). Despite their nonporosity, these materials achieve >99% iodine removal within seconds, outperforming previously reported sorbents. The adsorption performance correlates with particle size and morphology: amorphous, small particles with effective surface gaps show superior kinetics. The materials are recyclable; for instance, Et-NBP-Cage can be regenerated by washing with acetonitrile, maintaining removal efficiency over five cycles. This work highlights the potential of nonporous organic cages as high-performance iodine sorbents, addressing the critical need for materials that combine high uptake capacity with rapid removal kinetics.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202512057
A novel slag-based carbon powder-sodium alginate composite membrane was fabricated by incorporating purified slag-derived carbon powder into a sodium alginate matrix, followed by dual crosslinking with polyethyleneimine and glutaraldehyde. The membrane was designed to achieve waste-to-treat-waste objectives, enhance the resource value of industrial slag, and provide an efficient, regenerable adsorbent for Cr(VI) removal from water. Adsorption performance was systematically evaluated. Optimal adsorption occurred at pH 2, with elevated temperature and initial Cr(VI) concentration favoring uptake; equilibrium was reached at approximately 73 h. The adsorption kinetics followed a pseudo-second-order model, and isotherm data fitted the Langmuir model, yielding a theoretical maximum adsorption capacity of 471.970 mg·g−1. Thermodynamic analysis indicated a spontaneous, endothermic process. In simulated wastewater containing multiple metal ions, competitive effects moderately reduced adsorption capacity. After three adsorption-desorption cycles, the membrane retained good structural stability despite a decline in capacity. Characterization via SEM-EDS, FTIR, and XPS revealed a porous structure and the involvement of functional groups such as –COOH and –NH2, with partial reduction of Cr(VI) to Cr(III). The adsorption mechanism was attributed to synergistic electrostatic interaction, chemical coordination, and redox reactions.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4332-3
This correction addresses an error in the affiliations of the authors of the article 'Intrinsic pseudocapacitive Na0.44MnO2 prepared by novel ion-exchange method for high rate and robust sodium-ion batteries' originally published in Science China Materials, volume 66, issue 10, 2023, pages 3810–3816. In the original publication, one affiliation of the first author (Yuge Cao) was missing, and the affiliations of the authors were incorrectly labeled. The corrected affiliations are as follows: Yuge Cao is affiliated with the State Key Laboratory of High-Performance Ceramics and Superfine Microstructures, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050, China; the Beijing National Laboratory for Molecular Sciences and State Key Laboratory of Rare Earth Materials Chemistry and Applications, College of Chemistry and Molecular Engineering, Peking University, Beijing 100871, China; and the Center of Materials Science and Optoelectronics Engineering, University of Chinese Academy of Sciences, Beijing 100049, China. The other authors' affiliations are also corrected accordingly. The corresponding authors are Hui Bi ([email protected]) and Fuqiang Huang ([email protected]). This correction does not affect the scientific content of the original article.