SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3653-2
Designing photosensitizers with efficient intersystem crossing (ISC) and long-lived triplet excited states is critical for photodynamic therapy (PDT). However, conventional molecular design principles often rely on heavy-atom effects or specific donor-acceptor architectures, limiting generality. Here, we report a facile and rational strategy to convert intrinsically non-photosensitizing fluorophores into effective reactive oxygen species (ROS) generators by introducing guanidinium substituents. The modified photosensitizers exhibit prolonged triplet excited state lifetimes and considerable ROS production, in stark contrast to unmodified fluorophores which show intense fluorescence and negligible ROS generation. Electron paramagnetic resonance spectroscopy and high-resolution mass spectrometry confirm the formation of stable nitrogen-centered radical cations on the guanidinium moiety, stabilized by p-π conjugation. Mechanistic studies indicate that these radicals promote ISC and prolong triplet state lifetimes. In vitro and in vivo experiments demonstrate that guanidinium-modified photosensitizers induce immunogenic cell death (ICD) and elicit potent anti-tumor immunity. This work provides a universal and facile strategy for designing organic photosensitizers through stable radical cation-containing building blocks, expanding the scope of PDT agents.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.3724/2097-213X.2025.JFCT.0026
The catalytic hydrogenation of carbon dioxide (CO2) to light olefins (C2–C4) represents a pivotal route for mitigating greenhouse gas emissions while producing high-value chemical feedstocks. This review systematically examines the two principal technological pathways: CO2-Fischer-Tropsch synthesis (CO2-FTO) and CO2-methanol-to-olefins (CO2-MTO). The CO2-FTO route couples reverse water-gas shift (RWGS) with Fischer-Tropsch synthesis, whereas CO2-MTO proceeds via methanol intermediate. Key challenges arise from the thermodynamic stability of CO2 (C=O bond dissociation energy ~750 kJ/mol) and kinetic limitations. The review critically evaluates the influence of catalyst promoters (e.g., Na, Mn, Cu), support structures, and surface defect site concentrations on CO2 activation and olefin selectivity. For zeolite-based catalysts, pore architecture and acidity are shown to govern methanol conversion to olefins. Representative data from the literature indicate that Fe-based catalysts with Na promotion achieve CO2 conversion up to 40% with olefin selectivity exceeding 50% under optimized conditions. The review underscores the necessity of integrating catalyst design with reactor engineering to overcome thermodynamic constraints and achieve industrially viable performance.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3545-7
Magnetically driven hydrogel robots show promise in biomedical and underwater applications due to remote controllability, flexibility, biocompatibility, and chemical stability. However, limited functional integration restricts their adaptability. Here, a universal modular assembly strategy is introduced using a self-healing κ-carrageenan/polyacrylamide hydrogel embedded with magnetic particles, enabling free assembly of magnetic actuation modules. These modules construct soft robots with complex geometries and magnetization distributions, allowing diverse deformations under magnetic fields. The strategy further integrates photocatalysis by embedding Ru-Bi2CrO6 photocatalysts into functional modules, yielding an oxygen-generating robot. This robot exhibits flexible underwater movement via magnetically controlled oscillatory actuation, minimizing water agitation while supplying stable oxygen to specific aquatic environments. The photocatalytic oxygen evolution rate reaches 389.1 μmol g−1 h−1. The hydrogel skeleton suppresses particle aggregation and sedimentation, and facilitates magnetic recovery. This scalable and adaptable approach advances multifunctional soft robot design.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.3724/2097-213X.2025.JFCT.0036
Liquefied petroleum gas (LPG) is a clean fuel and essential chemical feedstock. This review summarizes recent advances in the hydrogenation of CO and CO2 (COx) to LPG, focusing on the design and optimization of bifunctional catalysts. The adsorption and activation of COx on various metal oxide surfaces, as well as the influence of zeolite pore structure and acidity on LPG selectivity, are critically evaluated. The synergistic effects between metal oxide and zeolite components in promoting LPG production and enhancing catalyst stability are elucidated. Key catalyst systems, including GaZrOx/H-SSZ-13 and InZrOx-Beta composites, demonstrate high selectivity to propane and isobutane-enriched C4 alkanes, respectively. The review highlights the importance of balancing methanol synthesis and hydrocarbon conversion functionalities to achieve high LPG yields while suppressing undesired methane and CO formation. Challenges such as catalyst deactivation and the need for precise control of acid site density are discussed. This work provides theoretical guidance for the rational design of highly efficient catalytic systems for COx hydrogenation to LPG, contributing to carbon resource utilization and emission reduction.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202512042
Chlorinated volatile organic compounds (CVOCs) such as dichloromethane (DCM), dichloroethane (DCE), trichloroethylene (TCE), and chlorobenzene (CB) are hazardous air pollutants requiring efficient removal. This study modified a commercial activated carbon (AC) via high-temperature treatment and phenol cracking carbon deposition to tailor its pore structure for enhanced adsorption of small-molecule CVOCs. The modified material (AC-M) exhibited a significant increase in ultramicropore volume (<0.8 nm), leading to a 24.2% increase in DCM adsorption capacity under dry conditions and superior water vapor resistance. Surface oxygen-containing functional groups decreased, enhancing hydrophobicity and mitigating water cluster formation. Adsorption kinetics analysis revealed that AC-M had a 39% higher total adsorption rate constant for DCM and a 22% reduction in mass transfer zone height, indicating faster adsorption. However, for larger CVOCs (DCE, TCE, CB), adsorption capacities slightly decreased due to reduced specific surface area, suggesting their adsorption relies more on micropores of matching size. This work provides a theoretical basis for designing efficient adsorbents for small-molecule CVOCs control.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.3724/2097-213X.2025.JFCT.0037
Alumina microspheres with a lamellar-assembled flower-like morphology were synthesized via a urea-assisted hydrothermal method and used as supports to prepare Pd/Al2O3-M catalysts by incipient wetness impregnation. The catalytic performance was evaluated in the selective hydrogenation of isoprene and the hydrogenation of 2-ethylanthraquinone for hydrogen peroxide production, and compared with a commercial alumina-supported Pd catalyst (Pd/Al2O3). Characterization revealed that the flower-like structure, composed of stacked nanosheets, promoted high Pd dispersion and enhanced metal-support interaction, leading to a higher surface Pd content and more abundant active sites. Under 60 °C and 1 MPa H2, Pd/Al2O3-M achieved 95.2% conversion of isoprene with 98.3% total selectivity to isoamylenes, and exhibited good stability over 24 h. In anthraquinone hydrogenation, it reached a hydrogenation efficiency of 15.8 g/L, a 27.4% improvement over Pd/Al2O3 (12.4 g/L). The study demonstrates that modulating carrier morphology is an effective strategy to simultaneously enhance activity, selectivity, and stability of Pd catalysts, offering a promising approach for designing efficient hydrogenation catalysts.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202607003
Co-firing municipal sludge with municipal solid waste (MSW) provides a viable solution for sludge disposal. This study evaluated the effect of sludge co-firing rate (0%, 5%, and 10%) on flue gas pollutant emissions, operational performance, and incineration byproduct characteristics in a waste-to-energy plant. The results showed that under all co-firing rates, the concentrations of SO2, NOx, CO, HCl, particulate matter, and dioxins complied with the limits specified in the Standard for Pollution Control on Municipal Solid Waste Incineration (GB 18485—2014). As the co-firing rate increased from 5% to 10%, concentrations of all flue gas pollutants except NOx and HCl exhibited an upward trend. The optimal operational performance under the test conditions was achieved at a 5% co-firing rate, when the flue gas volume, fan volume, and ammonia and lime consumption were minimized. Compared to the 5% rate, increasing the co-firing rate to 10% resulted in elevated flue gas volume, fan volume, and reagent consumption. Steam production decreased from 2.778 t/t (0% co-firing rate) to 2.358 t/t (5% co-firing rate) and 2.117 t/t (10% co-firing rate), indicating a reduction in power generation efficiency with increasing sludge co-firing rates. Leaching toxicity analysis of fly ash revealed significant reductions in the leached concentrations of Zn and Pb, while those of Hg, As, Ba, and Se showed slight increases, all remaining well below regulatory limits. This study confirms the technical feasibility of directly co-firing mechanically dewatered sludge (with a moisture content of 50% to 60%) without thermal drying. A 5% co-firing rate is identified as the optimal balance between operational economy and system efficiency.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3941-2
The precise and directed assembly of multicomponent aggregates remains a central challenge in materials chemistry, particularly the integration of neutral clusters. This study introduces a 'cation-mediated co-crystallization' strategy to overcome electrostatic assembly barriers between neutral aluminum molecular rings and polyoxometalates (POMs). By controllably functionalizing the rings with cationic moieties, the approach bypasses traditional 'ion-pair' limitations, enabling incorporation of diverse neutral clusters. The strategy exhibits structural extensibility, with cationic sites adjustable on ring exteriors or interiors, and potential extension to various polyanionic systems. The resulting hybrid materials demonstrate outstanding solution processability. When incorporated as dielectric dopants in a polymer matrix, they achieve a synergistic '1+1>2' effect: aluminum rings contribute high capacitance density (~11.19) and low dielectric loss (~0.03), while POMs provide high breakdown strength (~740 MV m−1). This work establishes a paradigm for directed macroscopic functional assembly via molecular-level cluster interaction 'encoding'.