SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4368-y
Stretchable pixelated electronic devices face a fundamental design conflict: accommodating mechanical deformation while preserving a high fill factor of active photosensitive elements. Conventional strain-relief strategies, such as pop-up, serpentine, and kirigami structures, rely on geometric unfolding that inevitably consumes inactive area, reducing pixel density and compromising photoresponse intensity, spatial resolution, and signal-to-noise ratio. In a recent breakthrough published in Nature Materials, Park et al. demonstrated a high-fill-factor silicon–liquid metal pixelated platform for multiscale visual acquisition and depth perception. The device integrates ~700-nm-thick ultrathin single-crystalline silicon photodiodes, finely patterned liquid metal interconnects, and a styrene–butadiene–styrene (SBS) elastomer substrate. The silicon pixels provide high-performance photoelectric conversion, while the liquid metal interconnects accommodate deformation, achieving a functional separation that mitigates the trade-off between pixel density and mechanical compliance. The device maintains stable photodiode characteristics and repeatable photoresponses under high-curvature hemispherical stretching and large biaxial tensile strain. Two applications were demonstrated: a human-eye-inspired robotic vision system with a curved photosensitive surface for wide-field imaging, and an epidermal, lensless, near-contact imaging device for close-range image acquisition. These systems enable multiscale visual acquisition and depth perception, offering a scalable route for future stretchable visual electronics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4316-0
The rapid development of small molecule acceptors (SMAs) has enabled organic photovoltaics (OPVs) to achieve power conversion efficiencies exceeding 21%. Structural asymmetry has emerged as a particularly effective approach for boosting acceptor performance. This review provides a comprehensive overview of asymmetric SMAs from the molecular scale to the nanoscale and macroscale. The main text is organized into four sections: molecular design strategies for structural asymmetry, crystal structure evolution from symmetry breaking, morphological characteristics revealed by advanced characterization techniques, and energy loss mechanisms involving asymmetric SMAs. At the molecular scale, asymmetry enables precise modulation of dipole moments and intermolecular interactions, directly affecting crystalline packing and charge-transport networks. At the nanoscale, it further regulates domain purity, phase continuity, and molecular orientation. Asymmetric designs can also help mitigate non-radiative voltage loss through modulation of charge-transfer state energetics. Overall, asymmetric molecular design introduces additional structural and electronic tunability, offering new opportunities for overcoming the trade-offs that limit OPV performance. Finally, we discuss ongoing challenges and outline future perspectives to guide continued development and innovation in asymmetric SMA design.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202604003
Emerging contaminants (ECs) in wastewater from urban transportation infrastructure remain poorly characterized. This study employed high-resolution mass spectrometry (HRMS)-based non-target screening to systematically identify the composition and spatial distribution of ECs in wastewater from three functional zones of a metro maintenance depot: storeroom (S1), office/residential area (S2), and final discharge outlet (S3). A total of 417 contaminants were detected, spanning eight categories including industrial materials, pharmaceuticals, pesticides, and natural products. Among these, 48 substances were identified with Level 1 confidence via spectral matching. Pesticides exhibited the highest detection frequency and concentration levels, representing the primary contaminant load. Semi-quantitative concentration heatmaps of 24 pesticides revealed significant spatial variation: S2 showed the highest number and concentration of contaminants, reflecting inputs from landscaping and vector control; S1 and S3 showed lower levels, indicating dilution, migration, and attenuation. Representative pesticide bifenox displayed a clear concentration gradient (S2 > S1 > S3), suggesting transport mechanisms such as surface runoff, hydraulic transfer, and sorption. These findings underscore the complexity and diversity of EC sources in metro depot wastewater, highlight the need to prioritize pesticides in regulatory management, and provide fundamental data for understanding EC environmental behavior and informing water environment risk assessment.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3451-2
Visual aesthetics is a key metric of semi-transparent organic photovoltaics (ST-OPVs) for building-integrated solar windows, yet previous studies have primarily focused on the compromise between efficiency and transparency. This work addresses the overlooked aspect of full visual aesthetic control, particularly the bidirectional reflected color for architectural harmony, via designing ST-OPVs with double-sided ultra-thin Ag/TeO2 transparent electrodes. This design facilitates full-spectrum color tunability covering the whole standard color gamut of CIE coordinates on both surfaces, achieved simply by adjusting layer thicknesses. The resulting devices exhibit neutral transparency (16.6%–27.0% average visible transmittance) and competitive power conversion efficiencies (8.1%–9.2%). Additionally, the devices demonstrate strong flexibility, with flexibility-adaptive coloration and curvature-enhanced aesthetics. This work presents an ST-OPV design featuring full visual aesthetics and considerable performance, paving the way for commercialization of organic solar windows for building and vehicle integration.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3842-8
The metal-support interactions (MSIs) play a significant role in regulating the electronic structure of metal species on oxide; however, they are often overlooked on carbon-based supports. In this work, hollow nitrogen-doped carbon (H-NC) supported Ru nanoparticles catalyst (Ru/H-NC) was prepared by a solvothermal method using H-NC as support and RuCl3 as precursor. Subsequently, Ru/H-NC was annealed at different temperatures (Ru/H-NC t °C) to adjust the effect of MSIs between H-NC support and Ru nanoparticles. The X-ray photoelectron spectroscopy results showed that the MSIs between Ru species and H-NC support increased with the increase of temperature, and more electrons were transferred from Ru species to H-NC support, thus regulating the valence state of Ru. In hydrogen evolution reaction (HER), the as-synthesized Ru/H-NC 300 °C merely requires overpotential of 35.45 mV to achieve 10 mA/cm2 at low Ru mass loading of 24.03 μg/cm2 on the glassy carbon electrode. The cyclic voltammetry test revealed that the electrochemically active surface area increased first and then decreased with the increasing MSIs. Moreover, electrochemical impedance spectroscopy results showed that HER kinetics of Ru/H-NC t °C catalysts increased first and then decreased with the MSIs enhancement. The density functional theory calculations confirmed that the MSIs effectively optimize the adsorption strength of the key intermediates (H*, HO*) on Ru clusters, and thus greatly improve the catalytic performance of Ru/H-NC in HER.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3980-y
Organic solar cells (OSCs) have achieved power conversion efficiencies (PCEs) exceeding 20% in laboratory-scale devices, yet challenges persist in developing cost-effective charge-transporting materials (CTMs) that ensure high performance and long-term stability. Conventional organic CTMs such as PEDOT:PSS and PDINN suffer from thermal instability due to molecular diffusion and phase segregation. Solution-processed metal oxides (MOs) offer excellent stability and cost-effectiveness but are plagued by surface defects, particularly hydroxyl groups, which act as recombination centers and photocatalytic sites, degrading device interfaces. Here, we develop an organic-inorganic hybrid strategy to homogeneously passivate solution-processible semiconducting MOs. By first synthesizing MOs rich in surface hydroxyl groups and then introducing organic molecules, we achieve chemically homogeneous passivation that mitigates surface defects. This approach enables favorable interfacial energy level alignment, enhanced charge extraction, and tunable surface energy. Employing these passivated MOs as electron transport layers (ZnO) and hole transport layers (NiOx), we achieve a champion PCE of 20.22% for all-MO CTM-based OSCs, the highest reported to date. Scalability is demonstrated via ambient blade-coating, yielding 18.33% PCE for large-area cells (1.44 cm2) and 16.03% for modules (20.05 cm2), with material costs estimated at only 4% of organic counterparts. Furthermore, devices exhibit outstanding stability, retaining over 80% of initial PCE after 1300 h of maximum power point tracking and over 1000 h of thermal annealing at 85°C. This work establishes a new benchmark for cost-effective, high-performance organic photovoltaics.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025050601
China's iron and steel industry has undergone comprehensive ultra-low emission transformation, meeting stringent limits for conventional pollutants, yet the fate of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) remains unclear. This study combined field sampling and literature review to analyze PCDD/Fs emission characteristics from sintering, converter, and electric arc furnace processes before and after transformation, and calculated national emissions for 2022. Results demonstrate that ultra-low emission transformation effectively reduces PCDD/Fs emissions. Specifically, emission concentrations decreased by 86.5%, 95.1%, and 66.9% for sintering, converter, and electric arc furnace, respectively, with corresponding emission factors dropping to 0.11, 0.009, and 0.014 μg I-TEQ·t−1 product. Under the transformation scenario, total national emissions were 104 g I-TEQ (uncertainty ±26 g), a 94.9% reduction from the unreformed scenario (2049 ± 763 g I-TEQ). Congener profiles shifted from high-chlorinated dominance to low-chlorinated dominance, while toxicity equivalent distribution remained dominated by 2,3,4,7,8-PeCDF (35%–56%). This study quantifies the co-benefit of PCDD/Fs reduction, providing critical data for updating China's emission inventory and formulating toxicity-oriented control policies.