SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3615-1
Stretchable electronics are pivotal for bio-integrated devices, soft robotics, and wearables, yet their development is constrained by single-layer architectures that limit integration density and by mechanical mismatch between rigid components and soft substrates, which curtails service life. Here, we introduce a LEGO-like modular assembly strategy to construct multilayer three-dimensional (3D) stretchable electronics. Electronic components (ECs) and self-healing polyurethane (SPU) substrates patterned with liquid metal (LM) circuits serve as the modular blocks. This design simplifies fabrication and markedly enhances 3D integration density. The combination of LM circuits and self-healing elastic substrates enables devices to withstand diverse deformations and to autonomously heal after mechanical damage. Notably, the devices can undergo multiple recycling and reuse cycles without significant performance loss. This methodology offers a new paradigm for advanced flexible electronics, addressing critical bottlenecks in integration density, mechanical robustness, and sustainability.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3686-6
Fused silica (SiO2) exhibits exceptional thermal stability and dielectric properties, making it an attractive material for aerospace and military applications. However, its relatively poor mechanical performance has limited its widespread practical utilization. This study proposed an innovative approach to fabricate SiO2-hexagonal boron nitride (hBN) composite ceramics via spark plasma sintering (SPS), leveraging the high-temperature phase transformation of cubic boron nitride (cBN) to introduce randomly oriented hBN as a reinforcing phase within the SiO2 matrix. The randomly oriented hBN nanoplates allow cracks to propagate along stronger grain boundaries, rather than along weaker interlayers of hBN, significantly improving the overall strength and fracture toughness of the composite. The maximum flexural strength and fracture toughness achieved are 183.4 MPa and 2.06 MPa m1/2 respectively, which are 3.6 times and 4 times that of fused SiO2. Concurrently, the composites exhibit low dielectric constants (ε = 3.58–3.69) and dielectric losses (tan δ < 0.0087) at 1 MHz. This work successfully enhanced the mechanical performance of fused SiO2 while preserving its excellent dielectric characteristics, opening new possibilities for its potential applications in advanced structural and functional fields.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2024112804
The rapid dissemination of antibiotic resistance genes (ARGs) in aquatic environments poses serious threats to public health and environmental safety under the 'One Health' framework. Nanoplastics (NPs), as co-occurring pollutants, can exacerbate ARG risks by promoting horizontal gene transfer (HGT), yet the influence of different functional groups on extracellular ARG (eARG) transformation remains unclear. This study investigated the effects of carboxy-modified polystyrene NPs (PS-COOH) and amino-functionalized polystyrene NPs (PS-NH2) compared to unmodified polystyrene NPs (PS) on the transformation of the extracellular resistance plasmid IE-V1955 (carrying an ampicillin resistance gene) into Escherichia coli DH5α. Results showed that PS-COOH exposure promoted plasmid transformation similarly to PS, with effects increasing over 0.1–20 mg·L−1. Low concentrations (0.1–0.5 mg·L−1) of PS-NH2 also enhanced transformation, with stronger effects than PS-COOH at equal doses, whereas high concentrations (1–20 mg·L−1) inhibited it. Mechanistically, PS-COOH (0.1–20 mg·L−1) and low PS-NH2 induced intracellular reactive oxygen species (ROS), increased cell membrane permeability, elevated the protein-to-polysaccharide ratio in extracellular polymeric substances (EPS), and promoted biofilm formation, thereby facilitating transformation. High PS-NH2 concentrations caused excessive ROS leading to cell lysis and formed aggregates with plasmids larger than membrane pores, blocking uptake. These findings provide a theoretical basis for assessing the combined environmental health risks of NPs and ARGs.
New Carbon Materials•2026•DOI: 10.1016/S1872-5805(26)61113-4
Porous pyrolytic carbon (PPyC) serves as the buffer layer in TRi-structural ISOtropic (TRISO) fuel particles, providing storage for fission gases, preventing damage to outer layers, and absorbing stresses caused by fuel-kernel swelling. However, the changes of PPyC micro- and meso-structure at high temperatures remain insufficiently understood. In this study, PPyC fabricated by chemical vapor deposition was heat-treated from 1200 to 1600 °C and characterized across atomic-to-mesoscopic scales. Results show that the structure changes with temperature with a transition at approximately 1400 °C. Below 1400 °C, a decrease in Raman ID/IG ratio, narrowing of the graphite diffraction peak, and increased sp2 hybridization indicate progressive ordering associated with defect redistribution. Concurrent decreases in true density and mesopore volume, together with increased closed porosity, are consistent with partial conversion of open pores into closed pores. Above 1400 °C, increased ID/IG ratio, broadening of the diffraction peak near the rhombohedral graphite (101) reflection, and transition regions between crystalline and amorphous material observed by TEM indicate increasing structural disorder. Meanwhile, initially distinct PPyC particle boundaries blur and merge into broad, plate-like domains. Subsequent decrease in closed porosity and increase in mesopore surface area are consistent with partial connection of closed pores to the open-pore network. This work shows that intrinsic coupling between atomic-scale structural change and mesoscale pore connectivity provides a basis for assessing high-temperature structural stability of PPyC in TRISO fuel particles.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202507081
Coal chemical waste salt, a solid residue from evaporative crystallization of high-salinity wastewater, poses significant environmental risks and challenges for resource utilization due to its complex composition. This study systematically analyzes its composition and environmental hazards, highlighting its typical "mixed salt" nature and the potential threats of organic pollutants and heavy metals to soil, water, and ecosystems. It reviews mainstream treatment pathways, including organic degradation, inorganic impurity removal, and salt separation, with a focus on the resource utilization of sodium chloride and sodium sulfate and their industrial prospects. The current pollution control technical specifications and product quality standards are examined, comparing the scope and technical points of relevant standards such as the "Technical Specification for Pollution Control of Chemical Waste Salt." Finally, countermeasures are proposed to address challenges including difficult treatment of mixed salts, insufficient resource utilization incentives, and incomplete standard systems, emphasizing technological innovation, policy guidance, and standard improvement.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(25)60619-0
Under the context of global energy transition and carbon neutrality, controlling nitrogen oxide (NOx) emissions from biomass combustion is of great significance, and the development of high-efficiency low-temperature catalysts has become a current research focus. In this study, Nb was used to dope and modify the Mn7-Cu3/BCN catalyst to construct the Mn7-Cu3-Nbx/BCN system. The doping amount was optimized through selective catalytic reduction (SCR) activity tests. The reaction mechanism was explored by combining in situ DRIFTS and density functional theory (DFT) simulations. Experimental findings revealed that the catalyst doped with 0.05% Nb achieved the optimal performance, sustaining a NO conversion efficiency of ≥94% within the temperature window of 150−275 °C while demonstrating improved resistance to alkali metal K poisoning. Mechanistic analyses showed that at low temperatures, the catalyst facilitated the SCR reaction via both the Eley-Rideal (E-R) and Langmuir-Hinshelwood (L-H) pathways, with the synergistic interaction between multiple active sites driving the efficient conversion of NH3 and NO. DFT calculations further confirmed that both pathways had the characteristics of low reaction energy barriers and significant exothermicity, ensuring the high activity and feasibility of the low-temperature reaction. The findings provided foundational theoretical support for the design of Nb-doped Mn-Cu-supported catalysts and the exploration of the underlying working mechanisms.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202509067
Marine litter poses a significant threat to coastal ecosystems globally, necessitating a comprehensive understanding of its multi-compartment distribution and driving mechanisms for effective management. This study investigated the occurrence, composition, and sources of beach, sea surface, and seafloor litter in the northeastern Daya Bay, a semi-enclosed bay, during August–October 2024. Sampling included 11 beach transects, 6 surface transects, and 25 seafloor transects. Results showed that the mean density of large and very large beach litter was 4.41×10^5 items·km−2, while medium beach litter reached 5.39×10^6 items·km−2. Surface litter densities were 5.82×10^2 and 9.90×10^3 items·km−2 for large/very large and medium fractions, respectively. Seafloor litter averaged 5.20×10^3 items·km−2. Plastics dominated all compartments, accounting for 74.0% (beach), 96.0% (surface), and 78.8% (seafloor) of total litter. Source apportionment using NOWPAP methodology indicated that beach and surface litter primarily originated from coastal recreational activities, whereas seafloor litter was mainly derived from shipping and fishing. Beach quality assessment revealed that 63.6% of beaches were moderately clean or better (grade II–IV), and 90.9% were moderately safe or better (grade I–III). Hotspots included tourism beaches, tidal gyre areas, coral reef zones, and fishing grounds. The study underscores the need for targeted management, including improved waste collection on tourist beaches, dynamic cleaning protocols, and port reception facilities for fishing waste.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025030501
Coastal areas serve as critical ecological interfaces for the migration of terrestrial microplastics (MPs) into the ocean, and characterizing their pollution is essential for integrated coastal management. This study investigated the occurrence, sources, and ecological risks of MPs in surface waters of nearshore areas and river estuaries around Hainan Island, a typical tropical tourist island. MPs abundance ranged from 316.67 to 1300 n·m−3 in seawater and from 400 to 5416.67 n·m−3 in river water. In seawater, the dominant polymer was polyethylene terephthalate, with fibers being the predominant shape, size class 500–1000 μm, and white/transparent color. In river water, polypropylene-ethylene copolymer dominated, also as fibers, but with size class 100–500 μm and white/transparent color. Seawater MP abundance showed a significant positive correlation with tourist numbers, and distribution across functional areas followed: tourism areas > natural areas > aquaculture areas > residential areas. Multiple correspondence analysis identified household plastic waste, laundry wastewater, aquaculture, and fishery products as primary sources of seawater MPs. Principal component analysis indicated homologous characteristics between seawater and river MPs, suggesting rivers are a major pathway for terrestrial MP transport to coastal zones. Ecological risk assessment revealed low pollution loads, with potential ecological risks moderate for seawater and medium-low for river water. Notably, 15% of seawater sampling sites exhibited polymer risk level Ⅳ, primarily driven by polyacrylonitrile's high biological toxicity. These findings provide a scientific basis for developing MP pollution control strategies in Hainan Island.