📚 Peer-Reviewed Translated Literature

All Clean Energy & Battery Intelligence (Page 7)

Name: SinoGreenTech Chinese Scientific & Technological Research Intelligence Corpus
Creator: SinoGreenTech
License: https://creativecommons.org/licenses/by/4.0/

Browse complete peer-reviewed translations from top indexed Chinese clean energy & battery intelligence journals. Read verified previews and download authentic research reports verified by SinoGreenTech.

Published Research Papers

Showing 24 of 1398 peer-reviewed translated articles (Page 7 of 59)

🔍 Advanced SearchOpen Access

Nanoscale Electronic-Structural Synergy Induced by Sr Doping Enables Record-Low Room-Temperature Infrared Emissivity in SmCoO3-Based Perovskites

Graphical AbstractVerified

SCIENCE CHINA Materials2026

Nanoscale Electronic-Structural Synergy Induced by Sr Doping Enables Record-Low Room-Temperature Infrared Emissivity in SmCoO3-Based Perovskites

Infrared stealth technology demands materials with simultaneously low infrared emissivity and robust environmental stability. Traditional coatings suffer from high emissivity or poor thermal stability. Here, we report Sr-doped SmCoO3 perovskite ceramics achieving a record-low room-temperature infrared emissivity of 0.12 in the 8–14 μm atmospheric window. Systematic doping (x = 0, 0.1, 0.2, 0.3, 0.4, 0.5) via solid-phase synthesis reveals that Sr substitution induces a Co3+/Co4+ mixed valence state, increases oxygen vacancy concentration, and distorts the lattice. First-principles calculations (CASTEP) confirm that doping narrows the bandgap from 1.8 eV to 0.9 eV and enhances the double-exchange interaction, boosting carrier concentration and mobility. The optimized composition (x = 0.3) exhibits an electrical conductivity of 1.2×10^3 S/cm and a carrier density of 3.5×10^21 cm^-3, leading to strong infrared reflection. The material maintains emissivity below 0.15 after 100 hours of thermal cycling at 300°C and 500 hours of humidity exposure (85°C/85% RH), demonstrating exceptional environmental durability. This work establishes a new paradigm for designing high-performance inorganic infrared stealth materials via electronic-structural synergy.

Read Full Abstract10.1007/s40843-026-4373-2

Intrinsic Planarity in Partially Fused Electron Acceptors Enabled by Furan Thiophene Linkage Design

Graphical AbstractVerified

SCIENCE CHINA Materials2026

Intrinsic Planarity in Partially Fused Electron Acceptors Enabled by Furan Thiophene Linkage Design

Electron acceptors containing single-bond-linked building blocks offer attractive advantages for organic solar cells owing to their synthetic simplicity and structural modularity. However, achieving backbone planarity without compromising electronic compatibility remains a persistent challenge. Conventional conformational locking strategies based on alkoxy substitution can effectively suppress torsional freedom but often elevate the highest occupied molecular orbital energy level, limiting compatibility with widely used donor polymers. Here, we report a partially fused electron acceptor design that achieves intrinsic backbone planarity through heterocycle selection rather than side-chain-assisted conformational locking. By incorporating a benzodifuran core and furan-thiophene linkages, the resulting acceptors exhibit a near-coplanar backbone geometry as revealed by density functional theory calculations, without the need for electronically perturbing alkoxy groups. Devices based on the optimized acceptor (BDF-1) deliver a binary power conversion efficiency of 12.2%, and further improvement to 19.5% is achieved in a ternary blend with PM6 and BTP-eC9. The enhanced performance is accompanied by favorable morphology, balanced charge transport, and suppressed recombination losses. This work provides molecular-level insight into partially fused acceptor design and demonstrates that heteroatom-guided conformational locking offers a viable strategy for expanding the design space of acceptors with single-bond-linked building blocks while maintaining compatibility with mainstream donor systems.

Read Full Abstract10.1007/s40843-026-4342-3

Thickness-Insensitive A-D-A-A' Polymeric Cathode Interlayer for High-Efficiency Organic Solar Cells

Graphical AbstractVerified

SCIENCE CHINA Materials2026

Thickness-Insensitive A-D-A-A' Polymeric Cathode Interlayer for High-Efficiency Organic Solar Cells

Organic solar cells (OSCs) require cathode interlayers (CILs) that combine high charge transport, defect passivation, and thickness insensitivity for scalable manufacturing. Here, we report the synthesis of a novel A-D-A-A'-type polymer, PDPP2F-NDI-N, via the green and efficient direct arylation polymerization (DArP) method. The multiple electron-deficient units in the backbone confer strong electron-withdrawing character, effective work function modulation, enhanced built-in potential, high crystallinity, and ordered molecular packing. PDPP2F-NDI-N exhibits a high electron mobility of 1.01 × 10⁻³ cm² V⁻¹ s⁻¹ and electrical conductivity of 3.13 × 10⁻³ S m⁻¹, facilitating efficient charge extraction and transport. Its interfacial modification capability suppresses interfacial defects and reduces non-radiative recombination losses. In ternary OSCs, PDPP2F-NDI-N achieves a high power conversion efficiency (PCE) of 20.44%, with outstanding thickness insensitivity retaining 92.8% of peak PCE at a 30 nm CIL thickness, and a T80 lifetime exceeding 1700 hours under photo-thermal aging. This work demonstrates that poly(A-D-A-alt-A') backbone design combined with DArP synthesis provides an effective strategy for developing high-performance, thickness-insensitive, and stable polymeric CILs, advancing efficient, stable, and scalable OSC applications.

Read Full Abstract10.1007/s40843-026-4359-0

Gate-Tunable PdSe2/WSe2 van der Waals Heterostructures for Ultrahigh Light On–Off Ratio Polarization-Sensitive Photodetection

Graphical AbstractVerified

SCIENCE CHINA Materials2026

Gate-Tunable PdSe2/WSe2 van der Waals Heterostructures for Ultrahigh Light On–Off Ratio Polarization-Sensitive Photodetection

Polarization-sensitive photodetection is critical for advanced optical communication and imaging systems, yet conventional photodetectors suffer from low on-off ratios and limited polarization discrimination. Here, we report gate-tunable PdSe2/WSe2 van der Waals heterostructures that achieve ultrahigh light on-off ratio and polarization-sensitive photodetection. The heterostructure forms a type-II band alignment, enabling efficient charge separation and self-powered operation. By applying a gate voltage, the photoresponse can be modulated, achieving an on-off ratio exceeding 10^6 under illumination. The device exhibits a high responsivity of 1.2 A/W and a specific detectivity of 10^12 Jones at room temperature. Polarization-sensitive measurements reveal a linear dichroism ratio of 2.1 at 532 nm, attributed to the anisotropic crystal structure of PdSe2. The photodetector operates over a broad spectral range from visible to near-infrared (400-1000 nm) with fast response times (rise/fall < 100 μs). The gate-tunable capability allows dynamic control of the photocurrent, enabling adaptive sensing applications. These results demonstrate that PdSe2/WSe2 heterostructures are promising candidates for high-performance, polarization-sensitive photodetectors, offering a pathway for next-generation optoelectronic devices.

Read Full Abstract10.1007/s40843-026-4360-7

Self-Assembly Growth of Single-Crystal Spiral Graphene on Liquid Heterogeneous Substrates

Graphical AbstractVerified

SCIENCE CHINA Materials2026

Self-Assembly Growth of Single-Crystal Spiral Graphene on Liquid Heterogeneous Substrates

Spiral graphene, characterized by Bernal-stacked layers and unique electronic properties, holds promise for advanced quantum and optoelectronic devices. However, its controlled synthesis remains challenging. Here, we report the self-assembly growth of single-crystal spiral graphene on a liquid heterogeneous substrate via chemical vapor deposition (CVD). A 50-μm-thick Cu foil was placed on a Ni support and heated to 1083 °C, the melting point of pure Cu, ensuring a fully molten Cu layer on solid Ni. Growth proceeded for 30 minutes under optimized conditions. The resulting spiral graphene exhibits a uniform Bernal stacking configuration, as confirmed by transmission electron microscopy and selected-area electron diffraction. Time-of-flight secondary ion mass spectrometry (ToF-SIMS) depth profiling and isotope-labeling experiments reveal that carbon incorporation occurs predominantly at the spiral step edges, following a self-assembly mechanism driven by the liquid substrate's dynamic surface. Control experiments on solid Cu-Ni alloys yield no spiral morphology, underscoring the critical role of the liquid phase. The liquid heterogeneous substrate facilitates rapid carbon diffusion and step-edge attachment, enabling the growth of high-quality single-crystal spirals with controlled layer number. This work provides a scalable route to synthesize spiral graphene with tailored stacking, advancing its application in twistronics and high-performance electronics.

Read Full Abstract10.1007/s40843-026-4394-x

Highly Enhanced Average ZT in Bismuth Telluride Alloys via Pseudo Grain Boundary Engineering

Graphical AbstractVerified

SCIENCE CHINA Materials2026

Highly Enhanced Average ZT in Bismuth Telluride Alloys via Pseudo Grain Boundary Engineering

Bismuth telluride (Bi2Te3)-based alloys remain the benchmark for low-temperature thermoelectric applications, yet their conversion efficiency is limited by the trade-off between electrical and thermal transport. This study introduces a pseudo grain boundary engineering strategy to simultaneously enhance the average figure of merit (ZT) in p-type (Bi,Sb)2Te3 (BST) materials. By incorporating Ag-based compounds, the carrier concentration is optimized via substitution of Ag+ ions, while the introduction of secondary phases at grain boundaries effectively suppresses lattice thermal conductivity. The approach yields a peak ZT of 1.35 at 393 K and an average ZT of 1.25 across 303–483 K, representing a significant improvement over pristine BST. Compared to prior reports, this work achieves superior average ZT while maintaining high electrical conductivity, addressing the longstanding bottleneck of thermal conductivity reduction without compromising carrier mobility. The findings underscore the efficacy of pseudo grain boundary engineering in advancing Bi2Te3-based thermoelectrics for solid-state cooling and power generation.

Read Full Abstract10.1007/s40843-026-4381-5

Enhanced γ-Ray Detection Performance of Cs3Cu2I5 Single Crystals via Suppression of Second-Phase Formation

Graphical AbstractVerified

SCIENCE CHINA Materials2026

Enhanced γ-Ray Detection Performance of Cs3Cu2I5 Single Crystals via Suppression of Second-Phase Formation

Single-crystalline Cs3Cu2I5 has attracted considerable interest owing to its excellent scintillation performance and favorable stability. Nevertheless, second phases induced by peritectic reactions during melt growth give rise to deteriorated scintillation properties and promote crystal cracking. In this work, the effects of non-stoichiometric ratios of raw material (n(CsI)=0.57, 0.62, and 0.63) on the crystallization behavior and scintillation properties were systematically investigated. The results show that the crystal quality is optimal at n(CsI)=0.62, featuring high transparency, absence of macroscopic inclusions, and cracking free, with a PLQY of 79.3%. Temperature-dependent photoluminescence verifies the self-trapped exciton emission mechanism with strong exciton-phonon coupling, giving an exciton binding energy of 473.9 meV and a Huang-Rhys factor S of 79.8. The as-grown crystal exhibits an optimized light yield of 24,380 photons/MeV, an energy resolution of 3.8% for 137Cs (662 keV) γ-rays, a dominant decay time of 957 ns, and excellent linear response in the medium-to-high energy region. Precise regulation of the raw material stoichiometry can effectively suppress the formation of second phases, yielding high-quality Cs3Cu2I5 single crystals whose comprehensive performance demonstrates promising application potential in γ-ray detection.

Read Full Abstract10.1007/s40843-026-4367-4

Photoblinking upconversion nanoparticles for super-resolution imaging

Graphical AbstractVerified

SCIENCE CHINA Materials2026

Photoblinking upconversion nanoparticles for super-resolution imaging

Single-molecule localization microscopy (SMLM) surpasses the diffraction limit to achieve molecular-scale resolution, but conventional probes suffer from photobleaching, limiting imaging duration. In a recent Nature Photonics article, Ren and co-workers introduced spontaneous photoblinking upconversion microscopy (SPUM) using Yb3+/Ho3+ co-doped core–shell–shell upconversion nanoparticles (UCNPs, NaYF4@NaYb/HoF4@NaLuF4). These UCNPs exhibit exceptional photostability and persistent, reversible blinking under 976 nm continuous-wave excitation, with negligible photodegradation. The blinking mechanism involves a Yb3+ multiphoton process coupled with defect-mediated energy trapping, switching the UCNPs between emissive (on) and non-emissive (off) states. Kinetic analysis revealed single-exponential bright-state dwell times and biexponential dark-state dwell times, indicating one decay pathway into a non-emissive state and two recovery pathways. In live-cell imaging, synchronized transport of UCNPs maintained constant interparticle distance and near-unity positional correlation. In fixed cells, Fourier ring correlation (FRC) resolution reached 30 nm, confirming sub-50 nm performance in biological specimens. This work provides an unprecedented combination of low duty cycle and photostability, establishing a foundation for non-photobleaching luminescent nanomaterials in long-term super-resolution imaging and nanoscale tracking.

Read Full Abstract10.1007/s40843-026-4376-3

Liquid Metal Interconnects Overcome the Fill-factor Limitations of Stretchable Pixelated Electronic Devices

Graphical AbstractVerified

SCIENCE CHINA Materials2026

Liquid Metal Interconnects Overcome the Fill-factor Limitations of Stretchable Pixelated Electronic Devices

Stretchable pixelated electronic devices face a fundamental design conflict: accommodating mechanical deformation while preserving a high fill factor of active photosensitive elements. Conventional strain-relief strategies, such as pop-up, serpentine, and kirigami structures, rely on geometric unfolding that inevitably consumes inactive area, reducing pixel density and compromising photoresponse intensity, spatial resolution, and signal-to-noise ratio. In a recent breakthrough published in Nature Materials, Park et al. demonstrated a high-fill-factor silicon–liquid metal pixelated platform for multiscale visual acquisition and depth perception. The device integrates ~700-nm-thick ultrathin single-crystalline silicon photodiodes, finely patterned liquid metal interconnects, and a styrene–butadiene–styrene (SBS) elastomer substrate. The silicon pixels provide high-performance photoelectric conversion, while the liquid metal interconnects accommodate deformation, achieving a functional separation that mitigates the trade-off between pixel density and mechanical compliance. The device maintains stable photodiode characteristics and repeatable photoresponses under high-curvature hemispherical stretching and large biaxial tensile strain. Two applications were demonstrated: a human-eye-inspired robotic vision system with a curved photosensitive surface for wide-field imaging, and an epidermal, lensless, near-contact imaging device for close-range image acquisition. These systems enable multiscale visual acquisition and depth perception, offering a scalable route for future stretchable visual electronics.

Read Full Abstract10.1007/s40843-026-4368-y

Coherent Heterointerface Engineering for Synchronized Proton-Coupled Electron Transfer in Photocatalytic Hydrogen Evolution

Graphical AbstractVerified

SCIENCE CHINA Materials2026

Coherent Heterointerface Engineering for Synchronized Proton-Coupled Electron Transfer in Photocatalytic Hydrogen Evolution

Photocatalytic hydrogen evolution fundamentally requires synchronized proton-coupled electron transfer. However, traditional multiphase architectures predominantly optimize spatial charge separation while systematically neglecting localized proton delivery, creating a severe kinetic bottleneck. Here, we engineer a highly coherent ZnCdS/ZnCo2S4 (ZnCdS/ZnCoS) heterojunction with an ultralow lattice mismatch of 2.5% to construct an efficient bioinspired catalytic cascade. This precise atomic registry establishes a three-fold synergistic effect: rapid hole extraction on ZnCdS drives highly selective (94.8%) benzyl alcohol (BA) oxidation, circumventing overoxidation; a robust internal electric field accelerates photogenerated electrons toward metallic ZnCoS domains; and a distinct thermodynamic gradient establishes a highly conductive solid-state conduit, propelling surface protons to migrate strictly along the coherent interface. Rigorous multidimensional validations, including kinetic isotope effect measurements and in situ infrared spectroscopy, demonstrate directed proton spillover culminating at cobalt coordination sites. Consequently, this spatiotemporal colocalization addresses the kinetic mismatch, achieving unprecedented hydrogen and benzaldehyde (BAD) evolution rates of 84.3 and 75.1 mmol g-1 h-1, respectively. This work establishes coherent interface engineering as a universal paradigm for synchronizing electron routing and proton spillover in advanced energy catalysis.

Read Full Abstract10.1007/s40843-026-4396-0

Polysaccharide-Based Networks-engineered Orthopedic Implant for Synergistic Antimicrobial Defense and Osteogenic Regeneration to Potentiate PI3K-AKT/HIF-1-Mediated Open Fractures Treatment

Graphical AbstractVerified

SCIENCE CHINA Materials2026

Polysaccharide-Based Networks-engineered Orthopedic Implant for Synergistic Antimicrobial Defense and Osteogenic Regeneration to Potentiate PI3K-AKT/HIF-1-Mediated Open Fractures Treatment

Open fracture fixation faces dual critical challenges: bacterial infection and impaired bone healing. This study presents a rationally designed biomacromolecular network coating (Ti-GOED) on titanium alloy bone plates to simultaneously address these issues. The coating integrates antimicrobial and osteogenic components, achieving an optimal balance between antibacterial efficacy and biocompatibility. In vitro assays demonstrated that Ti-GOED eliminates over 99% of common pathogenic bacteria by inhibiting peptidoglycan synthesis, disrupting bacterial cell wall formation, compromising membrane integrity, and leading to intracellular DNA leakage and bacterial death. Concurrently, Ti-GOED enhances the proliferation and osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs) via activation of the PI3K-Akt and HIF-1 signaling pathways. In vivo animal experiments confirmed strong antibacterial and osteogenic properties. This work provides a strategy for developing antibacterial coatings on medical devices, with significant potential for preventing and treating infections post-fracture fixation.

Read Full Abstract10.1007/s40843-026-4201-0

From combinatorial explosion to targeted optimization: a hybrid strategy for high-entropy catalyst discovery

Graphical AbstractVerified

SCIENCE CHINA Materials2026

From combinatorial explosion to targeted optimization: a hybrid strategy for high-entropy catalyst discovery

The vast compositional space of high-entropy materials presents a fundamental challenge for catalyst discovery. Considering 21 candidate elements at a 1% atomic resolution, this combinatorial explosion exceeds 10 billion (>10^10) possibilities, rendering direct experimental exploration impractical. Furthermore, purely data-driven approaches often struggle to comprehend the intrinsic chemical roles of discrete elemental identities, yet they excel at mapping continuous concentration gradients. Recognizing this distinction, we transform this combinatorial explosion into a targeted optimization problem by decoupling elemental selection from compositional ratio refinement. Ultrafast carbon thermal shock (CTS) is first employed to screen viable elemental combinations and establish an optimal quinary framework. Machine learning (ML) is subsequently applied to optimize compositional ratios within this reduced space, where statistical modeling efficiently navigates the remaining high-dimensional landscape. Targeting the oxygen evolution reaction (OER) as a proof-of-concept, our hybrid framework pruned the search space from over 10^10 possible compositions down into 13 systems, ultimately identifying high-entropy oxide (HEO)-Fe17.57Co28.45Ni31.27Mo10.57Zr12.14 as the optimal catalyst. The optimized high-entropy oxide exhibits an overpotential of 240 mV at 10 mA cm−2 and sustains stable operation at 1 A cm−2 for over 600 h in 1 M KOH. Mechanistic analysis reveals that Mo electronically tunes oxygen-intermediate adsorption, while Zr enhances structural robustness, collectively enabling high activity and durability. This work demonstrates that bridging discrete physical screening with continuous data-driven optimization provides an efficient and generalizable pathway for navigating high-dimensional material frontiers.

Read Full Abstract10.1007/s40843-026-4292-4

Activating Inert Atomic Sites in Heterogeneous Catalysis: Multi-Scale Design Strategies

Graphical AbstractVerified

SCIENCE CHINA Materials2026

Activating Inert Atomic Sites in Heterogeneous Catalysis: Multi-Scale Design Strategies

Heterogeneous catalysis underpins modern energy conversion, chemical manufacturing, and environmental remediation, yet its advancement is constrained by the scarcity and cost of noble metals. A sustainable alternative lies in activating intrinsically inert sites in earth-abundant materials such as transition metal oxides and carbon-based materials. This review systematically outlines recent advances in activating inert sites within low-cost catalytic materials. We begin by dissecting the physicochemical origins of catalytic inertness, including local atomic symmetry, electronic spin states, and coordination environments. Subsequently, we elucidate mechanisms by which multi-scale strategies—structural engineering, quantum state engineering, and microenvironment engineering—break symmetry, modulate spin states, and construct unique reaction microenvironments, transforming spectator atoms into highly efficient active centers. The review highlights performance breakthroughs in key reactions such as oxygen evolution reaction (OER) and alkane dehydrogenation, where catalytic metrics now rival or surpass noble metal benchmarks. For instance, triangular-ordered Co atoms achieve ampere-level hydrogen production, and tensile strain engineering activates inert non-defect Bi sites for CO2 electroreduction. We critically assess challenges—stability, scalable synthesis, and cost-effectiveness—that hinder industrial translation. Future directions emphasize multi-strategy synergy and artificial intelligence-assisted rational design. This review provides theoretical guidance and technological pathways for subverting noble-metal-dependent paradigms and developing next-generation efficient, low-cost catalytic systems.

Read Full Abstract10.1007/s40843-026-4108-1

Homogeneous Dip-Coating of Ion-Modulated Self-Assembled Monolayers for Large-Area Perovskite Photovoltaics

Graphical AbstractVerified

SCIENCE CHINA Materials2026

Homogeneous Dip-Coating of Ion-Modulated Self-Assembled Monolayers for Large-Area Perovskite Photovoltaics

Self-assembled monolayers (SAMs) are effective hole-selective contacts for inverted perovskite solar cells, but scalable deposition on rough substrates is hindered by molecular aggregation, disordered packing, and incomplete adsorption. We propose a hybrid strategy incorporating 4-(Piperidin-4-yl)butanoic acid hydrochloride (PBACl) into the 4PABCz solution during dip-coating. PBACl suppresses aggregation via hydrogen bonding and ionic interactions, yielding homogeneous coverage and improved wettability. The piperidine and carboxyl groups passivate buried interfacial defects through hydrogen bonding and coordination with perovskites. Small-area cells achieve a champion power conversion efficiency (PCE) of 26.09%, while a 5 cm × 5 cm mini-module (aperture area 14.4 cm²) delivers 23.29% PCE. Encapsulated devices retain 80% of initial PCE after 1350 h maximum power point tracking under continuous illumination. This ion modulation strategy bridges molecular-level interface control with scalable processing, offering a pathway to industrially relevant perovskite photovoltaics.

Read Full Abstract10.1007/s40843-026-4385-1

Gold Clusterzyme-Engineered Bioelectronic Dressing for Precisely Guiding Scarless Tissue Regeneration

Graphical AbstractVerified

SCIENCE CHINA Materials2026

Gold Clusterzyme-Engineered Bioelectronic Dressing for Precisely Guiding Scarless Tissue Regeneration

Electrical stimulation (ES) is a powerful strategy to mimic endogenous bioelectricity and accelerate complex tissue regeneration, such as chronic wound healing. However, aligning external stimulation with native bioelectrical and biochemical signals for rapid and scarless tissue regeneration remains challenging. Here, we report a wireless bioelectronic dressing (E-dressing) that establishes stable bioelectronic interfaces and precisely modulates cellular physiological activities. Bioactive allylamine-functionalized gold clusterzymes (AM-AuNCs) with intrinsic superoxide dismutase-like activity were designed as functional modifiers to co-polymerize with acrylic acid (AA), forming conductive p(AA-AuNCs) hydrogels. AM-AuNCs impart the hydrogel with superior antioxidant activity, robust interfacial adhesion, and high conductivity, enabling rapid hemostasis, efficient electrical stimulation transmission, and precise fibroblast regulation. Combined with 1.00 V of electrical stimulation, the p(AA-AuNCs) hydrogel significantly promotes fibroblast proliferation, migration, and alignment by upregulating TGF-β, FGF-2, and EGF. Integrated with a biocompatible, flexible zinc-ion battery delivering sustained and tunable electrical signals for over 7 days, the E-dressing precisely guides collagen remodeling, inhibits myofibroblast activation, and maintains Col I/Col III balance, leading to a 5-fold acceleration of wound closure and a 65.5% reduction in scar formation. This multifunctional E-dressing represents a promising bioelectronic device for precise cellular regulation and multimodal regenerative therapy.

Read Full Abstract10.1007/s40843-026-4378-6

SinoGreenTech ResearchSCIENCE CHINA Materials

SCIENCE CHINA Materials2026

Dual-Modulation of Carbon Coating and High-Valence Nb5+ Doping Toward High-Performance Na3V2(PO4)2O2F Cathode for Sodium-Ion Batteries

Sodium-ion batteries (SIBs) are promising alternatives to lithium-ion batteries for large-scale energy storage due to sodium's abundance and low cost. Among cathode materials, polyanionic compounds like Na3V2(PO4)2O2F (NVPOF) offer high energy density and dual voltage plateaus at ~3.6 and 4.0 V, but suffer from low electronic conductivity and sluggish Na+ diffusion. Here, we report a dual-modulation strategy combining high-valence Nb5+ doping and polydopamine-derived carbon coating to synthesize Na3V1.94Nb0.06(PO4)2O2F-C (NVPOF-Nb-C) via a hydrothermal route. X-ray diffraction and Rietveld refinement confirm that Nb5+ doping induces slight lattice expansion without altering the tetragonal I4/mmm framework. Density functional theory calculations reveal that Nb5+ doping optimizes the crystal structure and reduces the Na+ diffusion barrier, while the uniform carbon coating enhances electron transport. Consequently, NVPOF-Nb-C exhibits remarkably improved electrochemical performance, including high reversible capacity, excellent rate capability, and ultralong cycling stability. In a full cell with hard carbon anode, it delivers a high energy density of 487.2 Wh kg−1 at 1C and retains 91.51% capacity after 3000 cycles at 20C. This work provides a synergistic strategy to overcome the intrinsic limitations of polyanionic cathodes for practical SIB applications.

Read Full Abstract10.1007/s40843-026-4369-1

Lattice Distortion Effect in High Entropy Thermoelectric Materials: Mechanisms and Optimization Strategies

Graphical AbstractVerified

SCIENCE CHINA Materials2026

Lattice Distortion Effect in High Entropy Thermoelectric Materials: Mechanisms and Optimization Strategies

The global energy crisis and environmental pollution necessitate efficient recovery and utilization of thermal energy resources such as industrial waste heat. Thermoelectric materials, enabling direct conversion between thermal and electrical energy, offer broad application prospects in waste heat power generation and chip cooling. The energy conversion efficiency is determined by the dimensionless figure of merit, ZT = (S^2σ/κ)T, where S is the Seebeck coefficient, σ is the electrical conductivity, κ is the thermal conductivity, and T is the absolute temperature. Ideal thermoelectric materials require both a high power factor (PF = S^2σ) and low thermal conductivity. However, the strong coupling between electrical and thermal transport parameters makes synergistic optimization challenging. Over the past two decades, strategies such as band engineering, nanostructuring, liquid-like ions, interstitial atoms, phonon softening, and defect engineering have been explored. Among these, entropy engineering has emerged as a novel strategy that achieves synergistic optimization by introducing multiple components to increase configurational entropy. High entropy materials, originating from alloys, are defined as multi-principal element systems with five or more elements in near-equiatomic ratios forming single-phase solid solutions. The molar configurational entropy ΔS_conf = R∑x_i ln x_i, with materials classified as high entropy (ΔS_conf > 1.5R), medium entropy (1R < ΔS_conf < 1.5R), or low entropy (ΔS_conf < 1R). Four core effects are summarized: high entropy effect, lattice distortion effect, sluggish diffusion effect, and cocktail effect. Research has expanded from alloys to oxides, chalcogenides, and half-Heusler compounds. This review systematically summarizes the mechanisms by which lattice distortion in high entropy materials affects electrical and thermal transport, and discusses optimization strategies for thermoelectric performance.

Read Full Abstract10.1007/s40843-026-4205-8

Single-gate reconfigurable multifunctional devices based on anti-ambipolar van der Waals heterojunctions

Graphical AbstractVerified

SCIENCE CHINA Materials2026

Single-gate reconfigurable multifunctional devices based on anti-ambipolar van der Waals heterojunctions

The escalating demands of artificial intelligence, machine learning, and neural computing necessitate multifunctional optoelectronic devices capable of integrating sensing, memory, and processing. Two-dimensional van der Waals heterostructures (vdWHs) offer unique advantages, yet their practical deployment is hindered by complex architectures and inefficient mode-switching. Here, we demonstrate a MoTe2/SnS2 anti-ambipolar heterojunction device enabling single-gate reconfiguration among frequency doubling, broadband photodetection, and neuromorphic computing. The device exhibits a peak-to-valley ratio (PVR) of 465, ensuring efficient frequency doubling. As a photodetector, it operates across an exceptionally broad spectral range of 520–2200 nm, with outstanding responsivity and detectivity. Furthermore, the device emulates complete synaptic behaviors, including short-term plasticity (STP), long-term plasticity (LTP), and paired-pulse facilitation (PPF). Integrated into a reservoir computing (RC) system trained on a vehicle motion dataset, it achieves a directional recognition accuracy of 98.7%. This work establishes a paradigm for multifunctional integration and low-power neuromorphic computing, advancing next-generation intelligent optoelectronic systems.

Read Full Abstract10.1007/s40843-026-4262-7

Dual-Function Ladder Polysilsesquioxanes for Precise Patterning and 3D Integration of High-Performance Flexible Organic Logic Circuits

Graphical AbstractVerified

SCIENCE CHINA Materials2026

Dual-Function Ladder Polysilsesquioxanes for Precise Patterning and 3D Integration of High-Performance Flexible Organic Logic Circuits

Precise patterning of highly ordered organic semiconductor (OSC) thin-film arrays is critical for next-generation electronics. We report a ladder-like polysilsesquioxane (LPSQ) strategy to synthesize two functional analogs with tunable surface energies and robust dielectric properties. These LPSQ dielectrics, functionalized with alkyl or fluoroalkyl side chains, serve dual roles as gate insulators and patterning layers to guide blade-coating of 2,7-dioctyl[1]benzothieno[3,2-b][1]benzothiophene (C8-BTBT). This approach yields highly aligned arrays suitable for three-dimensional integration in flexible electronics. Synergistic combination of dense LPSQ dielectric packing and aligned semiconductor domains leads to excellent organic thin-film transistor (OTFT) performance, achieving approximately four-fold improvement in field-effect mobility compared to conventional silicon oxide dielectrics. Patterned LPSQ dielectrics enable high-resolution C8-BTBT patterning on plastic substrates, supporting 4-inch-scale 3D integration of flexible logic circuits, including inverters (voltage gain >100), NOR gates, and NAND gates. This work provides a scalable route to high-performance, large-area flexible organic circuits.

Read Full Abstract10.1007/s40843-026-4206-6

Ultra-high-crystallinity transparent glass-ceramic scintillators for high-temperature X-ray imaging

Graphical AbstractVerified

SCIENCE CHINA Materials2026

Ultra-high-crystallinity transparent glass-ceramic scintillators for high-temperature X-ray imaging

High-temperature X-ray imaging demands scintillators with high crystallinity, efficient scintillation, and robust thermal stability, yet suitable materials remain scarce. Here, we report an ultra-high-crystallinity transparent glass-ceramic (GC) scintillator strategically designed via controllable heat-treatment-induced crystallization. A sequential precipitation method is employed, where cubic CaF2 nanocrystals initially form, subsequently promoting heterogeneous nucleation and growth of hexagonal BaAl2Si2O8. Intrinsic nanoscale phase separation into F-rich and O-rich domains significantly reduces atomic diffusion distances, yielding an unprecedented crystallinity of up to 97.6%. Notably, defect traps (oxygen vacancy defects, likely located within the lattice or at crystalline/amorphous interfaces) enable efficient carrier capture and thermally stimulated release, contributing to remarkable resistance to thermal quenching. Consequently, the GC scintillator maintains 90.6% of its integrated X-ray excited luminescence (XEL) intensity at 300 °C, with the integrated XEL intensity reaching 94.2% of commercial Bi4Ge3O12 (BGO) at room temperature. This enables stable high-temperature X-ray imaging with a spatial resolution of ~10.4 lp mm−1 up to 225 °C. This work provides a versatile pathway for developing high-sensitivity scintillators for extreme-environment X-ray imaging.

Read Full Abstract10.1007/s40843-026-4315-2

Activated water molecular dissociation enhances nitrate electrochemical reduction activity by rational design of binary CoCu-Pi catalyst

Graphical AbstractVerified

SCIENCE CHINA Materials2026

Activated water molecular dissociation enhances nitrate electrochemical reduction activity by rational design of binary CoCu-Pi catalyst

Electrochemical nitrate reduction (NO3RR) to ammonia offers a sustainable route for nitrogen recovery from wastewater, yet its efficiency is constrained by complex multi-step proton-electron transfers and competitive hydrogen evolution. Here, we report a series of binary cobalt-copper phosphates with precisely tuned Co/Cu ratios, revealing a volcano-type relationship between composition and catalytic activity. The optimized Co0.5Cu1.5(OH)PO4 catalyst, supported on a Ni3Co1OxHy/Ni foam substrate, achieves a Faradaic efficiency of 99.0% for ammonia at a high current density of 200 mA cm−2 in 1 M nitrate electrolyte, with a production rate of 9.18 mg h−1 cm−2 and sustained stability over 200 hours. In-situ ATR-FTIR spectroscopy and density functional theory calculations elucidate a tandem mechanism: Co sites promote water dissociation to generate active hydrogen (H*), while adjacent Cu sites facilitate nitrate adsorption and subsequent hydrogenation steps. This synergistic division of labor lowers the energy barrier for the rate-determining step, effectively suppressing HER and enhancing intrinsic kinetics. The work demonstrates that precise atomic-ratio engineering in dual-site transition metal phosphates provides a viable strategy to overcome activity-selectivity trade-offs in electrocatalytic nitrate-to-ammonia conversion.

Read Full Abstract10.1007/s40843-026-4236-8

Inhalable ROS-Responsive Liposomes for Orchestrating Microenvironment Remodeling and Epithelial Regeneration in Pulmonary Fibrosis

Graphical AbstractVerified

SCIENCE CHINA Materials2026

Inhalable ROS-Responsive Liposomes for Orchestrating Microenvironment Remodeling and Epithelial Regeneration in Pulmonary Fibrosis

Idiopathic pulmonary fibrosis (IPF) is a lethal interstitial lung disease with limited therapeutic options. Current treatments, such as nintedanib and pirfenidone, target downstream fibrosis but fail to address the upstream drivers, including persistent alveolar epithelial injury and abnormal repair. This study presents an inhalable, reactive oxygen species (ROS)-responsive liposomal system (SAB/GC-1@Lip-cRGD) that co-delivers the antioxidant salvianolic acid B (SAB) and the thyroid hormone receptor β (TRβ) agonist Sobetirome (GC-1). The liposomes are surface-modified with cRGD peptides for targeted delivery to fibrotic lesions and possess a negative surface charge to enhance mucus penetration. In the high-ROS fibrotic microenvironment, the liposomes destabilize, releasing SAB and GC-1. SAB scavenges ROS to remodel the fibrotic niche, while GC-1 reactivates TRβ signaling, driving the differentiation of stalled Krt8+ transitional epithelial cells into functional alveolar type I (AT1) cells. In a mouse model of pulmonary fibrosis, SAB/GC-1@Lip-cRGD significantly reduced pro-inflammatory cytokines (TNF-α, IL-1β, IL-6) and TGF-β1 in bronchoalveolar lavage fluid and lung homogenates. The proportion of CD206+ M2 macrophages decreased from 27.4% in the model group to 6.2% after treatment, indicating potent anti-inflammatory and anti-fibrotic effects. This synergistic strategy of microenvironment remodeling and epithelial regeneration achieved robust collagen depletion, restoration of alveolar integrity, and recovery of pulmonary function, outperforming single-drug or non-targeted formulations. The work provides a generalized paradigm for integrating microenvironment regulation with regenerative repair in pulmonary diseases.

Read Full Abstract10.1007/s40843-026-4212-x

Suppressing Electrode Diffusion via Interfacial Engineering for High-Temperature Memristors

Graphical AbstractVerified

SCIENCE CHINA Materials2026

Suppressing Electrode Diffusion via Interfacial Engineering for High-Temperature Memristors

High-temperature electronics demand non-volatile memories (NVMs) capable of stable operation above 500 °C for applications in space exploration, nuclear energy, and autonomous driving. Conventional silicon-based devices fail above ~250 °C, and silicon carbide (SiC) cannot process data above 300 °C. Memristors offer a promising solution due to their simple structure, low power consumption, and scalability. A recent breakthrough by Yang et al. (Science) demonstrated a graphene (Gra)/HfOx/W memristor achieving data retention at 700 °C, with retention time of 50 h, endurance of 10^9 cycles, ON/OFF ratio exceeding three orders of magnitude, and operation voltage ~1.5 V. The key innovation is replacing the Pt bottom electrode with in-situ grown graphene, which suppresses high-temperature diffusion of the W top electrode through the HfOx layer. In contrast, Pt/HfOx/W devices fail after annealing at 800 °C for 10^4 s due to W migration, forming conductive filaments that lock the device in the ON state. High-resolution TEM and EDS reveal tungsten oxide (WOx) formation at the W/HfOx interface in Pt-based devices, while Gra-based devices show no such degradation. STEM-EELS confirms W migration across the HfOx layer in Pt devices, but graphene acts as a diffusion barrier, preserving stable switching behavior. This interfacial engineering approach provides a viable pathway for high-temperature NVM, addressing the critical bottleneck of electrode diffusion.

Read Full Abstract10.1007/s40843-026-4220-x

High Resistive Switching On/Off Ratio in Lu-Doped Hf0.4Zr0.6O2 Thin Films via Band Structure and Oxygen Vacancy Co-Strategy

Graphical AbstractVerified

SCIENCE CHINA Materials2026

High Resistive Switching On/Off Ratio in Lu-Doped Hf0.4Zr0.6O2 Thin Films via Band Structure and Oxygen Vacancy Co-Strategy

Fluorite-structured oxides (HfO2, ZrO2) are promising for resistive random-access memory (RRAM) due to their scalability and tunable properties. However, achieving high resistive switching on/off ratios remains challenging. Here, we report a collaborative strategy combining Hf/Zr ratio optimization and Lu3+ doping to regulate band structure and oxygen vacancy concentration in Hf0.4Zr0.6O2 (LHZO) thin films. The resulting LHZO devices exhibit a resistive switching ratio of 8.4 × 10^4, two orders of magnitude higher than that of ZrO2 (1.2 × 10^3). Electrical characterization and synchrotron radiation photoemission spectroscopy reveal that Lu doping widens the bandgap to 4.95 eV, downshifts the valence band, and introduces defect states, collectively suppressing p-type conductivity and reducing off-state leakage current. Simultaneously, Lu3+ doping enriches oxygen vacancies, stabilizing ohmic conductive filaments in the on-state. This co-optimization of band structure and oxygen vacancies effectively enhances insulating properties in the high-resistance state and ohmic conductivity in the low-resistance state, leading to superior resistive switching performance with robust retention (>10^4 s). Our findings establish a fundamental strategy for tailoring electronic properties of doped HfZrO2 thin films toward high-performance RRAM applications.

Read Full Abstract10.1007/s40843-026-4235-6