SinoTechIntel |SinoBioData |SinoGreenTech |SinoAILab
SinoGreenTech Academic Portal
Open Access Archive
SinoGreenTech
Clean Energy & Battery Portal
Search Database
📚 Peer-Reviewed Translated Literature

All Clean Energy & Battery Intelligence (Page 4)

Browse complete peer-reviewed translations from top indexed Chinese clean energy & battery intelligence journals. Read verified previews and download authentic research reports verified by SinoGreenTech.

Published Research Papers

Showing 24 of 1398 peer-reviewed translated articles (Page 4 of 59)

🔍 Advanced SearchOpen Access
SinoGreenTech ResearchSCIENCE CHINA Materials
SCIENCE CHINA Materials2026

Efficient green carbene-copper(I)-amide complexes enabled by a pyrimidine-fused N-heterocyclic carbene ligand

Copper(I)-based carbene-metal-amide (CMA) emitters offer an earth-abundant alternative to precious-metal phosphors for organic light-emitting diodes (OLEDs), yet efficient green emission remains scarce due to limited π-extension and unbalanced charge-transfer characteristics of N-heterocyclic carbene (NHC) ligands. This work introduces a pyrimidine-fused NHC ligand (CF3PMI) with balanced π-accepting ability, synthesized via a one-pot protocol in good yields. The resulting Cu(I)-CMA complex CF3PMI-BFCF3 exhibits green thermally activated delayed fluorescence (TADF) in doped thin films, with a photoluminescence quantum yield (PLQY) of 90% and a short emission lifetime of 1.16 μs. A vacuum-deposited OLED achieves green electroluminescence centered at 514 nm with an external quantum efficiency (EQE) of 22.7%. Furthermore, a hyperfluorescent OLED employing CF3PMI-BFCF3 as a sensitizer delivers an EQE of 21.8%, green emission at 537 nm, and a narrow full width at half maximum (FWHM) of 30 nm. These results establish a viable molecular design strategy for high-performance green-emitting Cu(I)-based TADF materials and provide a convenient synthetic route for Cu(I)-CMA emitters.

Read Full Abstract10.1007/s40843-026-4416-8
Dynamically color-tunable electroluminescent fiber device achieving 131.07% sRGB color gamut coverageGraphical AbstractVerified
SCIENCE CHINA Materials2026

Dynamically color-tunable electroluminescent fiber device achieving 131.07% sRGB color gamut coverage

Flexible and weavable alternating-current electroluminescent (ACEL) fiber devices are pivotal for wearable displays and human-computer interfaces, yet their intrinsic lack of color tunability restricts high-density information interaction. This study presents a dynamically color-tunable electroluminescent fiber device with a coaxial winding structure that integrates multiple fiber electrodes emitting the three primary colors. Through simple voltage driving, the device achieves a color gamut covering 131.07% of the sRGB standard, enabling arbitrary full-color tunability, including standard white light with CIE coordinates of (0.31, 0.33). The emission peak is continuously tunable over a 161.7 nm range, a 4-fold enhancement compared to previously reported ACEL fibers. The coaxial winding architecture is compatible with large-scale fabrication, yielding hundred-meter-scale fiber devices with a luminance variation of only 2.76%. The electroluminescent performance remains stable under stringent industrial standards: 10,000 friction cycles, 20 accelerated washing cycles, and 10-day storage at 105 °C and −20 °C. Integration into a smart textile watchband demonstrates real-time heart rate visualization via progress color changes and gesture-controlled color switching, validating its potential as an effective human-computer interface.

Read Full Abstract10.1007/s40843-026-4425-4
Bioinspired Three-Dimensional Zn-Coordinated Organic Frameworks as Carbonic Anhydrase-Mimics for Efficient Carbon Dioxide Hydration ReactionsGraphical AbstractVerified
SCIENCE CHINA Materials2026

Bioinspired Three-Dimensional Zn-Coordinated Organic Frameworks as Carbonic Anhydrase-Mimics for Efficient Carbon Dioxide Hydration Reactions

The development of efficient enzyme mimics for CO2 hydration remains a critical challenge for industrial carbon capture. This study reports a bioinspired three-dimensional Zn-coordinated organic framework (Zn-SOF) synthesized via solvothermal assembly of a salen-based ligand with zinc ions. The resulting material exhibits a carbonic anhydrase-like active site with a Zn-N2O2 coordination environment, as confirmed by X-ray absorption spectroscopy. The Zn-SOF demonstrates a CO2 hydration rate of 3.2 × 10^-3 s^-1 per active site, representing a 12-fold enhancement over the homogeneous Zn-salen complex and approaching 8% of native carbonic anhydrase II activity. The catalyst maintains structural integrity over 10 consecutive cycles with <5% activity loss and operates optimally at 25–40 °C and pH 7.4–9.0. Kinetic analysis reveals a Michaelis-Menten constant (Km) of 28 mM for CO2 and a turnover number (kcat) of 4.1 s^-1, outperforming benchmark Zn-based mimics. The framework's hierarchical porosity (BET surface area: 620 m2 g^-1) facilitates substrate diffusion, while the hydrophobic pore environment enhances CO2 affinity. This work establishes a design paradigm for robust, recyclable enzyme mimics that bridge the gap between homogeneous catalysts and natural enzymes, offering a scalable route for post-combustion CO2 capture.

Read Full Abstract10.1007/s40843-026-4490-y
SinoGreenTech ResearchSCIENCE CHINA Materials
SCIENCE CHINA Materials2026

Construction of fully octahedral-coordinated Co3O4 for efficient acidic water electrolysis

Proton exchange membrane water electrolysis (PEMWE) enables green hydrogen production from renewable electricity but relies on scarce Ir/Ru catalysts for the kinetically sluggish and acid-stable oxygen evolution reaction (OER). Non-noble-metal oxides typically suffer rapid dissolution and structural collapse under acidic, high-current conditions. Conventional cubic spinel Co3O4 (C-Co3O4) contains both inactive tetrahedral Co and active octahedral Co sites; tetrahedral dissolution destabilizes the framework. A recently reported trigonal Co3O4 phase (Tri-Co3O4), synthesized via vacuum-mediated molten-alkali mechanochemical methods, consists entirely of edge-shared [CoO6] octahedra in a compact two-dimensional layered structure. This configuration eliminates tetrahedral sites and exposes abundant octahedral active centers. Structural characterization by X-ray diffraction confirms strong (0001) and (0002) reflections, while Co K-edge EXAFS shows only Co-Cooct coordination without Co-Cotet signals. Tri-Co3O4 achieves 10 mA cm-2 at an overpotential of 269 mV, 181 mV lower than C-Co3O4 (450 mV), with low cobalt dissolution and 2500 h operation at 1.7 V in a practical PEMWE device. In situ XAFS reveals minimal Co oxidation-state change and nearly unchanged Co-O coordination during OER, confirming octahedral framework stability. DFT calculations identify the Tri-Co3O4 (10-10) facet as closest to the volcano apex, with balanced *OH and *O adsorption favoring the adsorbate evolution mechanism. Stability arises from coupled coordination, dimensional, and valence effects: outer-layer Co3+ provides high activity, middle-layer Co2+ stabilizes the lattice, and weak out-of-plane van der Waals interactions increase the energy barrier for Co removal. This highlight critically evaluates the mechanistic origins, unresolved questions regarding metastable phase generality, synthesis scalability, and long-term structural evolution under PEMWE operation.

Read Full Abstract10.1007/s40843-026-4497-y
Iron-Induced Bidirectional Catalytic Effects for Sulfur Redox Reactions in Lithium–Sulfur BatteriesGraphical AbstractVerified
SCIENCE CHINA Materials2026

Iron-Induced Bidirectional Catalytic Effects for Sulfur Redox Reactions in Lithium–Sulfur Batteries

Electrocatalysts in lithium–sulfur (Li–S) batteries accelerate sulfur species redox reactions and restrict polysulfide shuttling, yet ideal electrocatalysts with remarkable bidirectional catalytic effects remain scarce. This work utilizes iron (Fe) to trigger bidirectional catalytic effects in a cobalt (Co) electrocatalyst, generating a metal alloy-based heterostructure of Co-Co7Fe3 dispersed homogeneously on carbon sheets (Co-Co7Fe3/CS). Electrochemical tests and in situ X-ray diffraction disclose significantly enhanced bilateral catalytic activity of Co-Co7Fe3 compared to bare Co, confirmed by self-discharge measurements. Post-cycling investigation validates protection of the Li metal anode from sulfur species corrosion. The Co-Co7Fe3/CS-modified coin cells deliver an exceptional rate capability of 603 mAh g–1 at 5.0 C and steady long-life cycling for 500 cycles at 1.0 and 2.0 C. Under high sulfur loadings and lean electrolyte conditions, an impressive areal capacity with stable cycling is realized. This work provides valuable insights for designing metal alloy-based heterostructures as advanced electrocatalysts in Li–S batteries.

Read Full Abstract10.1007/s40843-026-4395-x
A novel soft magnetic high-entropy alloy: Achieving synergy in mechanical properties, soft magnetic performance, and corrosion resistanceGraphical AbstractVerified
SCIENCE CHINA Materials2026

A novel soft magnetic high-entropy alloy: Achieving synergy in mechanical properties, soft magnetic performance, and corrosion resistance

Balancing mechanical strength, corrosion resistance, and soft magnetic performance in structural-functional integrated materials remains a persistent metallurgical challenge. This study reports a face-centered cubic (FCC) Fe40Co35Ni15Al3Ta2Cr5 (at.%) high-entropy alloy (HEA) that achieves an unprecedented combination of these properties. The alloy exhibits a tensile strength of ~1200 MPa, total elongation of ~25%, saturation magnetization of 101.54 Am2·kg-1, and coercivity of 267.34 A·m-1. These values surpass most reported magnetic HEAs and conventional soft magnetic alloys. In a simulated 3.50 wt.% NaCl seawater environment, the alloy demonstrates a corrosion current density of 3.99 × 10-7 A·cm-2, comparable to 316L stainless steel. The synergy arises from nanoprecipitate engineering within the FCC matrix, which impedes dislocation motion while maintaining magnetic domain wall mobility and promoting a protective passive film. This work provides a design pathway for soft magnetic structural-functional materials suitable for corrosive marine environments, where simultaneous load-bearing and magnetic actuation are required.

Read Full Abstract10.1007/s40843-026-4417-x
Side-Chain-Engineered Guest Acceptor Synchronously Optimizes Vertical Phase Separation and Non-radiative Loss in Organic Solar CellsGraphical AbstractVerified
SCIENCE CHINA Materials2026

Side-Chain-Engineered Guest Acceptor Synchronously Optimizes Vertical Phase Separation and Non-radiative Loss in Organic Solar Cells

Ternary organic solar cells (OSCs) incorporating a structurally compatible guest acceptor (C7-Cl) into the PM6:BTP-eC9 host system are demonstrated. The low Flory-Huggins interaction parameter between host and guest acceptors facilitates intimate mixing, optimizing molecular packing and energy-level alignment. High-sensitivity sEQE and EQEEL analyses reveal a reduced non-radiative energy loss (KE3) of 0.216 eV in the ternary device. Consequently, the optimized ternary OSC achieves a champion power conversion efficiency (PCE) of 20.02% and an improved T80 operational lifetime of 1065 h. This work establishes a feasible strategy via structurally compatible guest doping to simultaneously optimize vertical phase separation and suppress non-radiative loss, providing a facile and effective route toward high-performance and stable OSCs.

Read Full Abstract10.1007/s40843-026-4480-1
Silver Disorder Enables Thermal Insulation in Both Crystalline and Amorphous Ag26I18W4O16Graphical AbstractVerified
SCIENCE CHINA Materials2026

Silver Disorder Enables Thermal Insulation in Both Crystalline and Amorphous Ag26I18W4O16

Superionic conductors exhibit high cation mobility arising from weak binding and continuous transport pathways, atomistically characterized by extensive structural disorder and partial occupancy akin to amorphization. This disorder, whether confined to a cation sublattice or extended to full amorphization, strongly impedes lattice thermal transport, rendering these materials intrinsically ideal thermal insulators. This work investigates Ag26I18W4O16, a superionic conductor tunable from fully amorphous to single-crystalline states, as a model system to probe the impact of disorder and amorphization on thermal transport. Extensive Ag+ disorder, in both crystalline and amorphous phases, reduces thermal conductivity to approximately the theoretical lower bound of 0.16 W/m-K with virtually no temperature dependence, while concurrently achieving the lowest mean sound velocity ever recorded for a dense solid. Pair distribution function (PDF) analysis of synchrotron X-ray total scattering data indicates that short-range disorder (< 5 Å), rather than long-range periodicity, governs thermal insulation performance in both phases. These findings suggest a design strategy reconciling structural stability with glass-like thermal insulation.

Read Full Abstract10.1007/s40843-026-4494-9
Ultrasonic Vibration-Assisted Mechanical Coating of Cr Powders on 45 Steel for Superior Corrosion ResistanceGraphical AbstractVerified
SCIENCE CHINA Materials2026

Ultrasonic Vibration-Assisted Mechanical Coating of Cr Powders on 45 Steel for Superior Corrosion Resistance

Conventional surface coating technologies for 45 steel are constrained by high processing temperatures, limited material compatibility, and insufficient interfacial bonding. This study introduces ultrasonic vibration-assisted mechanical coating (UVAMC) as a low-temperature deposition route that mitigates these limitations. The process yields a chromium coating on 45 steel with a nanoscale elemental interdiffusion transition layer at the interface, achieving a bonding strength of 66.0 MPa. The coating delivers improved corrosion resistance in aggressive environments while preserving the substrate's original compressive and tensile strength. The method also demonstrates broad process adaptability, successfully depositing copper, aluminum, and 316 stainless steel powders, and forming complex shapes such as the "SZU" pattern. These results establish UVAMC as a viable surface functionalization strategy for metallic materials, combining efficient deposition with operational flexibility.

Read Full Abstract10.1007/s40843-026-4466-3
Observation of Chargeable Photoconductivity in Bi0.85La0.15FeO3/Q2DEG-Based Multiferroic HeterostructureGraphical AbstractVerified
SCIENCE CHINA Materials2026

Observation of Chargeable Photoconductivity in Bi0.85La0.15FeO3/Q2DEG-Based Multiferroic Heterostructure

Chargeable photoconductivity, a non-volatile photoresponse phenomenon, was investigated in multiferroic heterostructures comprising Bi0.85La0.15FeO3 (BLFO) and a quasi-two-dimensional electron gas (Q2DEG). Two device architectures, LSMO/BLFO/Q2DEG and Pt/BLFO/Q2DEG, were fabricated and characterized under varying electrical connection conditions between the top electrode and the Q2DEG during illumination and dark waiting stages. Current-voltage (I-V) measurements reveal that the heterostructures exhibit persistent photoconductivity after illumination, with the magnitude and retention dependent on the circuit configuration. Under open/open conditions, the photocurrent increases with illumination duration, and subsequent dark waiting leads to a gradual decay, indicating charge storage and release mechanisms. The LSMO/BLFO/Q2DEG heterostructure demonstrates superior chargeable photoconductivity compared to the Pt counterpart, attributed to the oxygen vacancy migration and interfacial polarization effects. These findings establish a foundation for oxide-based photoelectric memory devices with potential for low-power, non-volatile optoelectronic applications. The results provide critical insights into the interplay between ferroelectric polarization, oxygen vacancy dynamics, and charge trapping at the BLFO/Q2DEG interface, offering a pathway for designing advanced multiferroic optoelectronic devices.

Read Full Abstract10.1007/s40843-026-4447-3
Macrocycle-Based Solid-State Lithium Electrolytes: Supramolecular Strategies and Ion-Transport RegulationGraphical AbstractVerified
SCIENCE CHINA Materials2026

Macrocycle-Based Solid-State Lithium Electrolytes: Supramolecular Strategies and Ion-Transport Regulation

The rapid demand for high-energy-density lithium batteries necessitates advanced solid-state electrolytes (SSEs) to overcome the safety and performance limitations of conventional liquid counterparts. Macrocyclic compounds, with their well-defined cavities, programmable binding sites, and tunable self-assembly, have emerged as powerful molecular regulators for designing next-generation SSEs. This review examines recent advancements in macrocyclic compound-based SSEs by categorizing their functions into four fundamental supramolecular regulation paradigms: cation-centered regulation (e.g., crown ethers), anion-centered regulation (e.g., calixarenes and calixpyrroles), channel-dominated transport (e.g., cyclodextrins), and hybrid regulation (e.g., cucurbiturils). We elucidate how these macrocycles precisely control ion coordination, modulate migration dynamics, and reshape interfacial chemistry, leading to enhanced ionic conductivity, improved Li+ transference numbers, suppressed lithium dendrite growth, and superior interfacial stability. While each paradigm offers distinct advantages, the most promising SSEs often leverage synergistic combinations of these strategies. Finally, we highlight the remaining challenges, including synthetic complexity and multi-objective performance trade-offs, and propose future research directions for developing highly efficient and durable macrocycle-based solid-state lithium batteries.

Read Full Abstract10.1007/s40843-026-4477-7
A Dual-Window NIR-Responsive High-Entropy Oxide Nanozyme for Photothermal-Catalytic Synergistic Therapy of Drug-Resistant Bacterial WoundsGraphical AbstractVerified
SCIENCE CHINA Materials2026

A Dual-Window NIR-Responsive High-Entropy Oxide Nanozyme for Photothermal-Catalytic Synergistic Therapy of Drug-Resistant Bacterial Wounds

Chronic infections caused by biofilms of drug-resistant bacteria pose a significant challenge in clinical treatment. Traditional NIR-I photothermal therapy has limitations, including restricted tissue penetration and potential damage to normal tissues due to high temperatures. While NIR-II light offers deeper penetration, there remains a scarcity of materials capable of simultaneously responding to both NIR-I and NIR-II wavelengths and integrating multiple sterilization mechanisms under mild conditions. In this study, a Fe-based high-entropy spinel oxide (HEOs) was designed and synthesized. Benefiting from lattice distortion induced by the high-entropy effect and the hybridization of multiple metal d-orbitals, the material achieves cooperative optimization of its electronic band structure. Consequently, it exhibits efficient broad-spectrum photothermal properties across both NIR-I and NIR-II regions alongside excellent peroxidase-like (POD) activity. Under dual-wavelength laser irradiation, the material enables mild yet efficient photothermal conversion (<50 °C) while simultaneously catalyzing hydrogen peroxide (H2O2) to generate abundant hydroxyl radicals (·OH), thereby constructing a synergistic antibacterial system combining dual-window photothermal therapy and enzymatic catalysis. In vitro experiments confirmed that the HEOs possesses potent bactericidal and biofilm eradication capabilities against both Gram-positive and Gram-negative bacteria. In a mouse model of drug-resistant bacterial wound infection, the material, assisted by either NIR-I or NIR-II laser irradiation, effectively cleared the infection, reduced inflammation, and promoted collagen deposition and angiogenesis, thereby significantly accelerating wound healing. This work not only provides a novel strategy for developing dual-window-responsive antibacterial materials for deep-tissue infections but also deepens the understanding of the structure-activity relationship in high-entropy materials at the electronic structure level.

Read Full Abstract10.1007/s40843-026-4311-y
Unveiling the Oxidation Mechanism of Y2O3-Doped Cr2AlC: From Grain Boundary Diffusion Blocking to Interfacial StrengtheningGraphical AbstractVerified
SCIENCE CHINA Materials2026

Unveiling the Oxidation Mechanism of Y2O3-Doped Cr2AlC: From Grain Boundary Diffusion Blocking to Interfacial Strengthening

The high-temperature oxidation resistance of Cr2AlC MAX phase ceramics is severely compromised by rapid Al depletion and the formation of a brittle sub-surface Cr7C3 layer. This study elucidates how trace Y2O3 doping (0.25 and 0.5 wt.%) modulates the oxidation behavior of Cr2AlC at 1100 °C. The incorporation of 0.5 wt.% Y2O3 significantly suppresses the parabolic rate constant compared to undoped counterparts. This kinetic suppression is attributed to the Reactive Element Effect (REE), where Y3+ segregation at α-Al2O3 grain boundaries inhibits outward Al3+ diffusion, shifting the scale growth mechanism to inward oxygen diffusion control. Consequently, this retarded Al consumption prevents the decomposition of the Cr2AlC substrate into Cr7C3. While undoped specimens fail due to volume contraction and Kirkendall voiding associated with the Cr7C3 interlayer, specimens with the most effective doping content within the investigated range maintain a stable, atomically sharp α-Al2O3/Cr2AlC interface devoid of voids and decomposition products. The superior adhesion of this interface is attributed to three synergistic factors: the elimination of volumetric mismatch induced by phase transformation, the mechanical interlocking provided by Y-rich oxide pegs, and the intrinsically higher interfacial bonding strength of the α-Al2O3/Cr2AlC system as confirmed by DFT calculations. These findings provide a mechanistic framework for designing oxidation-resistant MAX phase ceramics via reactive element doping.

Read Full Abstract10.1007/s40843-026-4288-1
Stabilizing High-Entropy Substrates and Tailoring Interfacial Water: High-Valent Pt Single Atoms Drive Durable Propylene EpoxidationGraphical AbstractVerified
SCIENCE CHINA Materials2026

Stabilizing High-Entropy Substrates and Tailoring Interfacial Water: High-Valent Pt Single Atoms Drive Durable Propylene Epoxidation

Electrochemical propylene epoxidation offers a sustainable route to propylene oxide (PO), but achieving high selectivity and stability under industrial current densities remains challenging. Herein, we report a high entropy amorphous CoFeNiCrMnBOx borate loaded with high valence Pt single atoms catalyst (a-Pt-HEBO) for stable bromine radical-mediated propylene epoxidation reaction (BrPOR). The high-entropy amorphous structure reshapes the interfacial hydrogen-bonding network and enriches free water, substantially lowering the energy barrier for water dissociation. Meanwhile, the strong electronic interactions between the coordinatively unsaturated, high-valence single Pt atoms and the substrate effectively prevent transition metal dissolution at high anodic potentials. The catalyst achieved 82.1% Faraday efficiency of PO at an industrial grade current density of 100 mA cm-2, and demonstrated excellent industrial application stability in up to 500 h of continuous test and within a scaled-up electrolyzer (4 × 4 cm2). This work provides a design for high-entropy catalysts in halogen-mediated electrosynthesis and a viable pathway toward carbon-neutral PO production.

Read Full Abstract10.1007/s40843-026-4404-7
Potential-Dependent Stability of Iridium–Cobalt Oxide Nanosheets for Proton Exchange Membrane Water ElectrolysisGraphical AbstractVerified
SCIENCE CHINA Materials2026

Potential-Dependent Stability of Iridium–Cobalt Oxide Nanosheets for Proton Exchange Membrane Water Electrolysis

Iridium-doped cobalt oxide nanosheets derived from a ZIF template were evaluated as oxygen evolution reaction (OER) catalysts for proton exchange membrane water electrolysis (PEMWE). Residual carbon was removed via a post-synthetic treatment to isolate intrinsic catalytic behavior. The Ir0.23Co0.77Ox catalyst exhibited enhanced activity and durability relative to commercial IrO2 in a practical PEMWE device. Potential-dependent, stage-resolved characterization combined with theoretical calculations probed catalyst stability under different operating voltages, revealing degradation mechanisms tied to applied potential. Contact angle measurements showed that the Ir0.23Co0.77Ox membrane electrode assembly (MEA) had water and air contact angles of 126° and 143°, respectively, compared to 126° and 143° for an IrO2 MEA at identical Ir loading, indicating improved wettability and gas release behavior. The work provides a framework for understanding potential-dependent stability in acidic OER catalysts and demonstrates a viable route to reduce Ir loading while maintaining PEMWE performance.

Read Full Abstract10.1007/s40843-026-4309-8
Narrow-Bandgap Acceptors with Low Energetic Disorder Achieve over 21% Efficiency in Organic Solar CellsGraphical AbstractVerified
SCIENCE CHINA Materials2026

Narrow-Bandgap Acceptors with Low Energetic Disorder Achieve over 21% Efficiency in Organic Solar Cells

The referenced literature comprises five peer-reviewed studies published between 2025 and 2026 in Nature Materials, Journal of the American Chemical Society, Nature Communications, and Science China Materials. These works collectively address the persistent trade-off between open-circuit voltage (Voc) and short-circuit current density (Jsc) in organic photovoltaics (OPVs). Tao et al. (Nat Mater, 2026) demonstrate that narrow-bandgap nonfullerene acceptors engineered to exhibit low energetic disorder achieve power conversion efficiencies (PCEs) exceeding 21%, primarily by suppressing non-radiative recombination losses. Westbrook et al. (JACS, 2025) establish that solid-state packing motifs govern exciton delocalization and photophysics in nonfullerene acceptors, providing a structural handle for reducing energetic disorder. Jiang et al. (Nat Commun, 2025) show that photoluminescent delocalized excitons in donor polymers facilitate efficient charge generation, linking exciton coherence to device performance. Zhang et al. (Nat Commun, 2026) employ synergistic steric hindrance and chlorination to realize binary OSCs with low energy loss, achieving high Voc without sacrificing photocurrent. The cumulative findings indicate that molecular design strategies targeting low energetic disorder and controlled solid-state packing can overcome the longstanding efficiency ceiling of ~20% in OPVs. These results have direct implications for the commercial viability of solution-processed, lightweight, and flexible solar cells, though scalability and long-term stability remain to be validated under industrial manufacturing conditions.

Read Full Abstract10.1007/s40843-026-4483-x
Janus Interface Materials: Reshaping Liquid-to-Vapor Mass Transfer through AsymmetryGraphical AbstractVerified
SCIENCE CHINA Materials2026

Janus Interface Materials: Reshaping Liquid-to-Vapor Mass Transfer through Asymmetry

Liquid-to-vapor mass transfer is central to energy and environmental processes. Conventional distillation relies on vapor-liquid equilibrium and device-level optimization, with materials playing passive structural roles. Non-boiling processes such as membrane distillation and interfacial solar evaporation localize phase change at confined interfaces, making mass transfer a materials-mediated transport phenomenon where interfacial structure and chemistry dictate evaporation kinetics, vapor escape, and solute rejection. Janus interface materials, featuring spatially separated hydrophilic and hydrophobic domains, introduce architectural asymmetry to regulate liquid-to-vapor mass transfer. This review summarizes recent advances, highlighting mechanisms including the cooperative pump-valve effect, nanoconfinement-enhanced transport, and mitigation of fouling and scaling. Representative applications in membrane distillation, solar-driven evaporation, and personal thermal-moisture management are systematically discussed. Key challenges and future opportunities are outlined, particularly in advancing fundamental understanding, scalable fabrication, and practical implementation.

Read Full Abstract10.1007/s40843-026-4313-7
SinoGreenTech ResearchSCIENCE CHINA Materials
SCIENCE CHINA Materials2026

Water-Mediated Highly Reversible Mg-O2 Batteries

Magnesium-oxygen (Mg-O2) batteries offer high theoretical energy density and low-cost earth-abundant magnesium, yet practical deployment has been impeded by poor cycling stability and low energy efficiency, primarily due to the sluggish decomposition of conventional MgOx discharge products. Here we demonstrate that trace water in the electrolyte redirects the cathodic reaction to form chemically reactive Mg2(OH)3Cl·4H2O as the main discharge product, enabling a new reversible pathway: 8Mg2+ + 4Cl- + 3O2 + 22H2O ⇋ 4Mg2(OH)3Cl·4H2O. This water-mediated chemistry significantly enhances redox reversibility compared with the MgOx route. The resulting Mg-O2 battery delivers over 324 stable cycles at 1000 mA·g-1 with a capacity of 500 mAh·g-1 and an energy efficiency of 92%, surpassing all previously reported Mg-O2 systems. The electrolyte comprises 0.25 M magnesium bis(trifluoromethanesulfonyl)imide (Mg(TFSI)2) and 0.5 M magnesium chloride (MgCl2) in ethylene glycol dimethyl ether (DME) with a trace amount of water. These findings establish a general strategy for reversible Mg-O2 electrochemistry and provide a new design paradigm for practical magnesium-based energy storage.

Read Full Abstract10.1007/s40843-026-4324-4
Ultra-anti-freezing and thermally stable hydrogel-derived liquid-based smart window for all-climate energy-efficient buildingsGraphical AbstractVerified
SCIENCE CHINA Materials2026

Ultra-anti-freezing and thermally stable hydrogel-derived liquid-based smart window for all-climate energy-efficient buildings

Thermochromic smart windows based on hydrogels suffer from inevitable freezing at subzero temperatures and dehydration at elevated temperatures, severely limiting their year-round applicability. This study reports a hydrogel-derived liquid (HDL) smart window that circumvents these limitations through a solvent-exchange strategy. The HDL is synthesized by polymerizing a hydroxypropyl cellulose (HPC) and N-isopropylacrylamide (NIPAM) network in a water-glycerol binary solvent, followed by complete removal of the water phase via vacuum-assisted evaporation. The resulting anhydrous liquid exhibits a lower critical solution temperature (LCST) of 32 °C, with a solar modulation ability (ΔTsol) of 63.2% and a luminous transmittance (Tlum) of 88.1% in the clear state. Critically, the HDL remains optically switchable after 1000 hours at -40 °C and 1000 hours at 80 °C, with no observable phase separation or freezing. The smart window prototype demonstrates a 12.3% reduction in indoor cooling energy consumption in a simulated tropical climate and a 9.8% reduction in heating energy in a cold climate, compared to a commercial low-E glass. The liquid-state formulation enables facile large-area fabrication via roll-to-roll processing, with a demonstrated 30 cm × 30 cm prototype retaining 95% of the initial ΔTsol after 500 bending cycles. This work establishes a viable pathway for all-climate energy-efficient building envelopes.

Read Full Abstract10.1007/s40843-026-4488-x
Liquid Metal-Modified MXene Composite Films for Electromagnetic-Multispectral CompatibilityGraphical AbstractVerified
SCIENCE CHINA Materials2026

Liquid Metal-Modified MXene Composite Films for Electromagnetic-Multispectral Compatibility

The proliferation of multispectral detection platforms demands materials that simultaneously satisfy electromagnetic interference (EMI) shielding and infrared (IR) camouflage without compromising radio-frequency (RF) transmission. Conventional MXene films exhibit exceptional EMI shielding (>40 dB) but suffer from high IR emissivity and severe RF reflection, precluding integration with wave-transmitting arrays. This work introduces liquid metal (LM)-modified MXene composite films engineered via structural patterning to decouple optical, IR, and RF responses. The LM phase, dispersed within the MXene interlayer galleries, reduces free-electron density and tailors the dielectric loss, while a periodic array architecture creates impedance-matched windows for RF transmission. The resulting films achieve an EMI shielding effectiveness of 36 dB at 510 µm thickness, with a low IR emissivity of 0.36 and an RF transmittance exceeding 80% in the X-band. The patterning strategy suppresses surface current continuity, mitigating the trade-off between shielding and transmission. These metrics represent a 20% improvement in IR camouflage and a 15% enhancement in RF transparency relative to pristine MXene films. The composite films also demonstrate mechanical flexibility, retaining 95% of initial conductivity after 1,000 bending cycles. This work establishes a scalable route for multispectral-compatible materials critical for next-generation stealth and communication systems.

Read Full Abstract10.1007/s40843-026-4468-6
Advances toward stress-assisted degradation of biomedical Mg alloysGraphical AbstractVerified
SCIENCE CHINA Materials2026

Advances toward stress-assisted degradation of biomedical Mg alloys

Biomedical Mg alloys are candidate biodegradable metals for orthopedic and cardiovascular implants, yet their in vivo service life is governed by coupled mechanical-chemical attack that accelerates loss of mechanical integrity. This review consolidates recent advances in stress-assisted degradation of Mg alloys under physiological conditions, focusing on stress corrosion cracking (SCC), flow-induced corrosion, and corrosion fatigue. Biomechanical-chemical coupling test methods are assessed for their capacity to reproduce physiological loading, fluid shear, and electrolyte chemistry. Mechanistic pathways are analyzed, including anodic dissolution, hydrogen-induced cracking, passivation film rupture, and flow-induced shear stress. Modification strategies for enhancing resistance to stress-assisted degradation are categorized into alloying design, microstructure regulation, and surface treatments. The review further evaluates computer-aided predictive models and multi-physics coupling frameworks that link pit-to-crack transitions, phase-field damage localization, and mechano-chemical peridynamics. Empirical data from the cited literature demonstrate that SCC and corrosion fatigue in chloride-containing media reduce fatigue strength by 40–70% relative to air, while flow-induced shear stresses above approximately 1 Pa disrupt protective films and elevate degradation rates. These findings establish quantitative benchmarks for alloy design and surface engineering. The review concludes that integrating multi-physics modeling with physiologically relevant testing is essential for predicting implant service stability and accelerating clinical translation of high-performance biomedical Mg alloys.

Read Full Abstract10.1007/s40843-026-4426-y
Anisotropic Strain Tunable Near-Infrared Exciton Emission in PhosphoreneGraphical AbstractVerified
SCIENCE CHINA Materials2026

Anisotropic Strain Tunable Near-Infrared Exciton Emission in Phosphorene

Monolayer black phosphorus (phosphorene) exhibits a direct bandgap and strong in-plane anisotropy, making it a promising candidate for near-infrared (NIR) optoelectronic devices. However, the precise modulation of its excitonic emission via anisotropic strain remains insufficiently understood, particularly regarding the contrasting strain responses of phosphorene versus transition metal dichalcogenides (TMDs). Here, we combine experimental characterization with tight-binding (TB) modeling to elucidate the strain-dependent bandgap evolution in phosphorene. Using a four-band TB model, we derive the bandgap at the Γ point as E_g^BP = 4t1 + 2t2 + 4t3 + 2t5, with hopping parameters t1 = -1.220 eV, t2 = 3.665 eV, t3 = -0.205 eV, t4 = -0.105 eV, and t5 = -0.055 eV. Under tensile strain along the zigzag (ZZ) direction, the interatomic distance associated with t1 increases, reducing the magnitude of |t1|. Since t1 is negative, the bandgap increases, contrary to the behavior of monolayer MoS2, where tensile strain decreases the bandgap due to positive hopping parameters t11, t22, and t12. This anisotropic strain response enables selective tuning of NIR exciton emission. Our findings provide a quantitative framework for strain engineering in phosphorene-based NIR devices, highlighting the critical role of hopping parameter signs in determining bandgap modulation.

Read Full Abstract10.1007/s40843-026-4263-3
Electronic Structure Tailoring of COFs Photocatalysts via Triazine Moieties for Efficient H2O2 Generation and Water DecontaminationGraphical AbstractVerified
SCIENCE CHINA Materials2026

Electronic Structure Tailoring of COFs Photocatalysts via Triazine Moieties for Efficient H2O2 Generation and Water Decontamination

Developing efficient photocatalysts for hydrogen peroxide (H2O2) synthesis is vital for sustainable chemistry, yet optimizing the electronic structure of triazine-based covalent organic frameworks (COFs) through precise spatial engineering remains a challenge. In this work, we constructed four model COFs to systematically decode how the spatial arrangement and incorporation level of triazine moieties regulate the electronic structures and H2O2 production efficiency. Combined experimental and theoretical analyses revealed that FB-AT achieved an optimal donor-acceptor architecture via rational spatial arrangement of triazine and benzene moieties. This configuration established an intramolecular potential gradient, which not only promoted charge separation by suppressing the exciton binding energy but also enriched the electron density at triazine sites. These electron-rich active centers significantly facilitated the oxygen reduction reaction by lowering the thermodynamic energy barrier for *OOH intermediate formation. Consequently, FB-AT exhibited a remarkable H2O2 production rate of 11055 μmol g-1 h-1 in pure water, along with a superior solar-to-chemical conversion efficiency of 1.16%. Additionally, FB-AT enabled complete degradation of phenol, tetracycline, and rhodamine B within 5–15 min of visible light irradiation. This work provides crucial guidance for the rational design of advanced COF photocatalysts for sustainable H2O2 production and water decontamination.

Read Full Abstract10.1007/s40843-026-4165-1
Phototherapeutic Efficacy and Cell Death Pathways of Atomically Precise Chiral Au25 Nanoclusters in Tumor TherapyGraphical AbstractVerified
SCIENCE CHINA Materials2026

Phototherapeutic Efficacy and Cell Death Pathways of Atomically Precise Chiral Au25 Nanoclusters in Tumor Therapy

Chirality profoundly influences tumor therapy by regulating key physiological processes, yet the link between chirality and therapeutic properties of atomically precise metal nanoclusters (NCs) remains poorly understood. Atomically precise Au25 NCs protected by chiral cysteine ligands (L-Au25(cys)18, D-Au25(cys)18, and Rac-Au25(cys)18) were constructed and systematically investigated to elucidate the association between chirality and tumor therapeutic performance. Although no significant difference in enzyme-like activity was observed among the three NCs, Rac-Au25(cys)18 exhibited enhanced reactive oxygen species generation under 808 nm laser irradiation, achieving superior phototherapeutic effects in both in vitro and in vivo tumor models. The chiral Au25 NCs induced distinct cell death pathways: L-Au25(cys)18 primarily triggered ferroptosis, D-Au25(cys)18 induced both ferroptosis and apoptosis, and all three NCs activated disulfidptosis. In vivo, tumor inhibition rates for L-Au25, D-Au25, and Rac-Au25 groups were 46.7%, 42.5%, and 68.3%, respectively, with no significant body weight fluctuations and minimal hepatorenal toxicity. Hematological and histopathological analyses confirmed favorable systemic biocompatibility. This work clarifies the correlation between chiral structures and tumor therapeutic performance of gold NCs, providing experimental insights and theoretical support for the design of novel chiral nanomaterials and optimization of precise tumor phototherapeutic strategies.

Read Full Abstract10.1007/s40843-026-4177-3