📚 Peer-Reviewed Translated Literature

All Clean Energy & Battery Intelligence (Page 38)

Name: SinoGreenTech Chinese Scientific & Technological Research Intelligence Corpus
Creator: SinoGreenTech
License: https://creativecommons.org/licenses/by/4.0/

Browse complete peer-reviewed translations from top indexed Chinese clean energy & battery intelligence journals. Read verified previews and download authentic research reports verified by SinoGreenTech.

Published Research Papers

Showing 24 of 1398 peer-reviewed translated articles (Page 38 of 59)

🔍 Advanced SearchOpen Access

Dark Triplet State Activation to Construct Near-Infrared Host–Guest Organic Room Temperature Phosphorescence Materials for In Vivo Bioimaging

Graphical AbstractVerified

SCIENCE CHINA Materials2026

Dark Triplet State Activation to Construct Near-Infrared Host–Guest Organic Room Temperature Phosphorescence Materials for In Vivo Bioimaging

Organic room temperature phosphorescence (RTP) materials, particularly those emitting in the near-infrared (NIR) region, hold great promise for bioimaging due to their deep-tissue penetration and minimal autofluorescence interference. However, achieving efficient NIR RTP with long lifetimes remains challenging due to inefficient triplet exciton utilization. Herein, we propose a dark triplet state activation strategy to achieve efficient NIR RTP by leveraging host–guest energy transfer. Using benzophenone derivatives (BP, OBP, MBP, PBP) as rigid host matrices with high intersystem crossing (ISC) efficiency and an NIR fluorophore (MPTCF) as the guest, we achieve efficient Dexter-type triplet-triplet energy transfer (TTET) that converts non-emissive host triplets into guest-centered NIR phosphorescence. Systematic optimization of the host–guest system has shown that PBP/MPTCF exhibits exceptional performance, including long phosphorescence centered at 705 nm, an ultralong phosphorescence lifetime (210.3 ms), and high ISC efficiency (44.4%). When fabricated into nanoparticles (NPs), PBP/MPTCF exhibits superior performance, featuring prolonged phosphorescence signals (>120 s), deep tissue penetration capability (>2 mm), and excellent biocompatibility (cell viability >95% at 300 μM). In addition, this system enables high-contrast subcutaneous imaging with excellent dispersibility and stable in vivo imaging capability. More importantly, PBP/MPTCF NPs demonstrate precise lymph node mapping through time-gated phosphorescence imaging and efficient tumor visualization within 4 h post-injection with a high tumor-to-liver ratio of 2.8. The successful activation of dark triplet states through this host–guest approach provides a general design principle for developing high-performance NIR RTP materials, while the demonstrated biomedical applications highlight their significant potential for advanced bioimaging and precision diagnostics.

Read Full Abstract10.1007/s40843-025-3864-4

Advanced Cathode Design: Ordering LiMn6 Functional Units in Li-Rich Layered Oxides

Graphical AbstractVerified

SCIENCE CHINA Materials2026

Advanced Cathode Design: Ordering LiMn6 Functional Units in Li-Rich Layered Oxides

Li-rich layered oxides (LLOs) xLi2MnO3·(1−x)LiTMO2 (0 < x < 1, TM = Mn, Ni, Co, etc.) are promising high-energy cathode materials for lithium-ion batteries, capable of achieving energy densities up to 1000 Wh kg−1. However, their practical application is hindered by limited cycle life and voltage decay, primarily stemming from structural instability of Li2MnO3 and LiTMO2 domains during cycling, which manifests as transition metal cation migration, oxygen release, and TM dissolution. This review establishes a comprehensive design and modification scheme based on the fundamental structural unit of LLOs: the LiMn6 hexatomic-ring. In this unit, each Li atom in the TM layer is surrounded by six Mn atoms, forming a π-type hybridization between Mn 3d(t2g) and O 2p orbitals, creating an intact π-bond ring that acts as a distributed redox center. Ordering these functional units into specific spatial configurations can enhance capacity, voltage, and structural stability. However, substituting Mn with other elements breaks the symmetry of the π-bond ring, altering redox behavior and reversibility. The spatial arrangement of LiMn6 rings, representing the arrangement of π-bond rings, is critical for redox activity. In Li2MnO3, the typical honeycomb superstructure of LiMn6 rings is discussed. This review highlights the importance of functional unit ordering in material design, drawing parallels from other systems, and proposes a systematic approach to engineer LLOs for improved electrochemical performance.

Read Full Abstract10.1007/s40843-025-3799-4

Interfacial hydrogen spillover and coherent lattice matching in ZnIn2S4/ZnCo2S4 enable synchronized electron-proton delivery for efficient photocatalytic H2 evolution

Graphical AbstractVerified

SCIENCE CHINA Materials2026

Interfacial hydrogen spillover and coherent lattice matching in ZnIn2S4/ZnCo2S4 enable synchronized electron-proton delivery for efficient photocatalytic H2 evolution

Photocatalytic hydrogen production is fundamentally limited by inefficient charge separation and asynchronous supply of electrons and protons to active sites. Here, we designed a ZnIn2S4/ZnCo2S4 (ZIS/ZCS) heterojunction with an atomically coherent interface achieved via an ultralow lattice mismatch of 0.05%. This unique structure promotes rapid electron transfer through a built-in electric field and facilitates continuous proton migration via a hydrogen spillover effect, thereby synchronizing electron and proton delivery at the catalytic interface. This dual regulation of electrons and protons synergistically promotes proton-coupled electron transfer, resulting in a high hydrogen evolution rate of 70.3 mmol g−1 h−1 and selective oxidation of benzyl alcohol to aldehyde (39.3 mmol g−1 h−1) with 93.6% selectivity. This work demonstrates the critical importance of lattice match and dual charge-proton management in designing efficient photocatalysts for complex redox reactions.

Read Full Abstract10.1007/s40843-025-3889-6

Autferroicity: Concept, Candidates, and Applications

Graphical AbstractVerified

SCIENCE CHINA Materials2026

Autferroicity: Concept, Candidates, and Applications

Magnetism and electric polarity are fundamental physical phenomena whose coupling gives rise to magnetoelectric (ME) effects. Multiferroics, materials hosting simultaneous ferroelectric and magnetic orders, offer cross-control mechanisms but face inherent incompatibility due to the d0 rule versus partially filled d/f orbitals. Improper ferroelectricity, as in h-YMnO3, circumvents this but yields weak polarization (<10 μC/cm2). Type-I multiferroics like BiFeO3 exhibit strong polarization (~100 μC/cm2) but weak ME coupling. This paper introduces autferroicity, a novel ferroic state where ferroelectric and magnetic orders are mutually exclusive, leveraging their repulsive coupling to achieve field-selective switching and strong ME response. Autferroics encode logic states in the identity of the active ferroic phase, enabling high-contrast, low-crosstalk nonvolatile memory. Their bistable energy landscape, reshaped by strong ME coupling, facilitates true random number generation (TRNG) with reduced energy barriers and higher switching frequencies. Practical realization demands advances in synthesis and phase control. Autferroicity offers a paradigm shift, exploiting ferroic exclusivity rather than coexistence, promising robust bistability and intrinsically strong ME coupling for next-generation devices.

Read Full Abstract10.1007/s40843-025-3597-2

Facile Ball-Milling Synthesis of Highly Efficient Manganese Halides Toward White Light-Emitting Display and X-Ray Imaging

Graphical AbstractVerified

SCIENCE CHINA Materials2026

Facile Ball-Milling Synthesis of Highly Efficient Manganese Halides Toward White Light-Emitting Display and X-Ray Imaging

Organic-inorganic hybrid Mn(II) halides have attracted considerable attention for optoelectronic applications due to their environmental friendliness and high photoluminescence quantum yield (PLQY) originating from the d-d transition (4T1(G) → 6A1) of Mn2+. However, complex synthesis processes restrict their potential for low-cost, large-scale production. In this study, the Mn(II) halide (C22H22O2P)2MnBr4 was synthesized via a simple and efficient mechanochemical ball-milling approach, achieving high photoluminescence efficiency and production yield. The halide exhibits intense green emission centered at 520 nm with a PLQY of up to 96.1%. Combined experimental and theoretical characterizations confirm that the strong light emission originates from the synergistic interaction between organic cations and inorganic framework components. A white light-emitting diode (WLED) device based on (C22H22O2P)2MnBr4 was fabricated, exhibiting bright white light emission and a wide color gamut of 113% NTSC. Furthermore, a scintillation screen based on (C22H22O2P)2MnBr4 was fabricated and utilized to investigate internal structures of various objects. The screen demonstrates a high relative light yield of 70546 photons MeV−1, a low detection limit of 33.8 nGy air s−1, and a spatial resolution of up to 12.36 lp mm−1. Finally, by integrating the scintillation screen with a thin-film transistor (TFT) backplane, the resulting X-ray detector successfully enables simulated medical imaging of dental caries. This work establishes a robust foundation for large-scale synthesis of highly efficient luminescent Mn(II) halides and highlights their potential in multifunctional light-emitting applications.

Read Full Abstract10.1007/s40843-025-3886-1

Advancing lithium-air capacitor batteries through redox pair-enabled dual-cathode configurations

Graphical AbstractVerified

SCIENCE CHINA Materials2026

Advancing lithium-air capacitor batteries through redox pair-enabled dual-cathode configurations

Lithium-air capacitor batteries (LACBs) integrate the rapid charge-discharge capability of supercapacitors into conventional lithium-oxygen batteries, significantly enhancing power density. However, their cycling stability remains unsatisfactory. In this study, we incorporated redox mediators (RMs) into an LACB featuring a dual-cathode configuration. This design facilitates sustained electron transfer between the electrode and Li2O2/Oxygen, thereby delaying RM deactivation caused by electrode passivation and improving overall electrochemical performance. The RM-enhanced battery achieved over 250 cycles at 2 mA cm−2 with a limited capacity of 0.5 mAh cm−2, while exhibiting a 0.54 V reduction in charging voltage at 0.1 mA cm−2 compared to the RM-free system. Furthermore, application of an aluminum foil sealing technique enabled a power density of 13.8 mW cm−2 at 6 mA cm−2, overcoming mass transport limitations inherent in open-cell configurations. We also investigated the influence of oxygen barrier films with varying barrier capabilities on LACB performance. Results indicate that films with superior oxygen resistance better maintain a clean capacitor electrode surface, thereby providing more stable electron supply to the RMs and enhancing rate capability and cycling performance. These findings underscore the potential of redox mediators in improving the performance and longevity of LACBs, offering a promising strategy for their future development.

Read Full Abstract10.1007/s40843-025-3774-3

Synergistic Top-Down Etching Coupled with In Situ Phase Transition: A Strategy for High-Precision Photolithographic Patterning of Perovskite Single Crystals

Graphical AbstractVerified

SCIENCE CHINA Materials2026

Synergistic Top-Down Etching Coupled with In Situ Phase Transition: A Strategy for High-Precision Photolithographic Patterning of Perovskite Single Crystals

Perovskite photolithography, an emerging research frontier, combines the unique properties of perovskite materials with lithographic processes for advanced optoelectronic applications. Currently, bottom-up photolithography is preferred due to perovskites’ intrinsic characteristics, while top-down photolithography offers better compatibility with mature semiconductor manufacturing workflows. In this study, we innovatively propose an integrated technology that merges top-down photolithography with in situ phase-transition strategy. Utilizing non-emissive Cs4PbBr6 perovskite single crystals (SCs) as both structural templates and reaction sources, we achieve spatially selective patterning by precise wet and dry etching, followed by inductively coupled plasma (ICP)-induced Cs4PbBr6 to CsPbBr3 phase transition. This process facilitates the direct fabrication of highly emissive CsPbBr3/Cs4PbBr6 microstructure patterns inside Cs4PbBr6 SCs. Such a synergistic approach simplifies perovskite photolithography procedures and enables rapid, large-scale manufacturability. Furthermore, its integration with machine learning optimization algorithms showcases promising application potential in intelligent anti-counterfeiting. This novel approach, integrating perovskite SCs homologous substrate with customized photolithography, provides a new strategy for fabricating high-performance perovskite optoelectronic devices and is expected to promote technological advancement.

Read Full Abstract10.1007/s40843-025-3893-y

Defect and Crystal Field Engineering Enables High Efficiency and Anti-Thermal Quenching in Cr3+ Doped Rigid Garnet Phosphors for Multifunctional Optoelectronics

Graphical AbstractVerified

SCIENCE CHINA Materials2026

Defect and Crystal Field Engineering Enables High Efficiency and Anti-Thermal Quenching in Cr3+ Doped Rigid Garnet Phosphors for Multifunctional Optoelectronics

Near-infrared (NIR) phosphors with high quantum efficiency (QE) and thermal robustness are critical for phosphor-converted light-emitting diodes (pc-LEDs). Here, a Cr3+-activated Lu2BaAl4SiO12 (LBASO) garnet phosphor is engineered via chemical unit cosubstitution of [Ba2+-Si4+] for [Lu3+-Al3+] in Lu3Al5O12 (LuAG), inducing a strong crystal field that yields NIR emission at 705 nm. The optimized LBASO:0.07Cr3+ exhibits an internal quantum efficiency (IQE) of 84.82% and external quantum efficiency (EQE) of 46.02%. Notably, it demonstrates anti-thermal quenching (ATQ) with 126.03% of its initial intensity at 498 K under 442 nm excitation, attributed to a wide band gap, weak electron-phonon coupling, defect trap energy levels, high structural rigidity, and optimized electron population distribution. A NIR pc-LED fabricated with this phosphor achieves an output power of 134.99 mW and photoelectric conversion efficiency of 11.4% at 100 mA drive current. These results underscore the potential of LBASO:Cr3+ for applications in plant lighting, night vision, and nondestructive analysis.

Read Full Abstract10.1007/s40843-025-3790-5

Efficient blue-light-excitable broadband NIR emission in Mo4+-doped double perovskite with robust thermal stability and efficient X-ray scintillation for pixel-level X-ray to NIR image fusion

Graphical AbstractVerified

SCIENCE CHINA Materials2026

Efficient blue-light-excitable broadband NIR emission in Mo4+-doped double perovskite with robust thermal stability and efficient X-ray scintillation for pixel-level X-ray to NIR image fusion

Lead-free double perovskites are promising for optoelectronic applications due to their tunable optical properties, stability, and non-toxicity. However, achieving efficient ultrabroadband near-infrared (NIR) emission and X-ray radioluminescence (RL) simultaneously remains challenging. Here, we report a Mo4+-doped Cs2(Na0.4Ag0.6)InCl6 double perovskite that exhibits efficient blue-light-excitable NIR emission with a near-unity photoluminescence quantum yield. The emitter demonstrates robust thermal stability, retaining 84% of its initial emission intensity at 420 K relative to 300 K. Under X-ray irradiation, the material shows bright NIR RL with a high light yield of 39,400 ± 1100 photons/MeV. A flexible film of Mo4+-doped Cs2(Na0.4Ag0.6)InCl6/polydimethylsiloxane (PDMS) was fabricated and applied as an NIR light source and X-ray scintillator. A dual-functional platform for cooperative NIR and X-ray imaging was established using a bullfrog palm as the target, achieving pixel-level fusion of NIR and X-ray images without spatial mismatch or complex image processing. The fused image simultaneously visualizes blood vessels and skeleton textures under the skin tissue. This work provides a viable strategy for lead-free double perovskites in advanced optoelectronic devices, particularly for multispectral imaging.

Read Full Abstract10.1007/s40843-025-3863-x

Tailoring Ni Clusters in Ordered Macroporous CeO2 for Efficient Photothermal Reverse Water Gas Shift Reaction

Graphical AbstractVerified

SCIENCE CHINA Materials2026

Tailoring Ni Clusters in Ordered Macroporous CeO2 for Efficient Photothermal Reverse Water Gas Shift Reaction

Photothermal catalysis offers a sustainable route for CO2 conversion to value-added chemicals, yet precise control of active sites and light-harvesting materials remains challenging. Here, we report the rational integration of three-dimensional ordered macroporous (3DOM) CeO2 with positively charged (Niδ+)n clusters to construct efficient photothermal catalysts for the reverse water gas shift (RWGS) reaction. The 3DOM architecture enhances light absorption, improves access to active sites, and provides a confined environment for reactant enrichment. Engineering (Niδ+)n clusters within 3DOM CeO2 not only affords highly active sites for H2 adsorption and dissociation but also modulates the local structure of CeO2 to promote CO2 adsorption and activation. Furthermore, the (Niδ+)n clusters significantly enhance light-harvesting capability across the UV-vis-NIR spectrum, generating a pronounced photothermal effect that accelerates reaction kinetics. The optimized (Niδ+)n/CeO2 catalyst exhibits outstanding photothermal catalytic performance, achieving a CO production rate of 63.36 mmol g−1 h−1 in a flowing reaction with CO selectivity of 93% under simulated solar irradiation (2.6 W cm−2). Theoretical calculations reveal that the (Niδ+)n/CeO2 catalyst reduces the thermodynamic energy barrier for *COOH formation in CO2 hydrogenation. This study offers valuable insights into the design of photothermal catalysts, highlighting the significant potential of active-site engineering in promoting efficient CO2 conversion for practical solar-to-fuel production.

Read Full Abstract10.1007/s40843-025-3890-6

Regulating the metal-support interactions of Ru on hollow nitrogen-doped carbon to enhance the hydrogen evolution reaction activity

Graphical AbstractVerified

SCIENCE CHINA Materials2026

Regulating the metal-support interactions of Ru on hollow nitrogen-doped carbon to enhance the hydrogen evolution reaction activity

The metal-support interactions (MSIs) play a significant role in regulating the electronic structure of metal species on oxide; however, they are often overlooked on carbon-based supports. In this work, hollow nitrogen-doped carbon (H-NC) supported Ru nanoparticles catalyst (Ru/H-NC) was prepared by a solvothermal method using H-NC as support and RuCl3 as precursor. Subsequently, Ru/H-NC was annealed at different temperatures (Ru/H-NC t °C) to adjust the effect of MSIs between H-NC support and Ru nanoparticles. The X-ray photoelectron spectroscopy results showed that the MSIs between Ru species and H-NC support increased with the increase of temperature, and more electrons were transferred from Ru species to H-NC support, thus regulating the valence state of Ru. In hydrogen evolution reaction (HER), the as-synthesized Ru/H-NC 300 °C merely requires overpotential of 35.45 mV to achieve 10 mA/cm2 at low Ru mass loading of 24.03 μg/cm2 on the glassy carbon electrode. The cyclic voltammetry test revealed that the electrochemically active surface area increased first and then decreased with the increasing MSIs. Moreover, electrochemical impedance spectroscopy results showed that HER kinetics of Ru/H-NC t °C catalysts increased first and then decreased with the MSIs enhancement. The density functional theory calculations confirmed that the MSIs effectively optimize the adsorption strength of the key intermediates (H*, HO*) on Ru clusters, and thus greatly improve the catalytic performance of Ru/H-NC in HER.

Read Full Abstract10.1007/s40843-025-3842-8

Work-function-engineered high-entropy alloy/carbon nanofibers direct Na+ transport for stable anode-free sodium batteries

Graphical AbstractVerified

SCIENCE CHINA Materials2026

Work-function-engineered high-entropy alloy/carbon nanofibers direct Na+ transport for stable anode-free sodium batteries

Anode-free sodium metal batteries (AF-SMBs) are promising for high-energy, low-cost energy storage, but suffer from interfacial instability due to sluggish Na+ kinetics and non-uniform deposition. Here, we report a scalable electrospinning-pyrolysis route to anchor FeCoNiCuMn high-entropy alloy (HEA) nanoparticles on N-doped carbon nanofibers (HEANCF). Density functional theory (DFT) calculations reveal high binding energy toward Na atoms, facilitating desolvation and adsorption. A built-in electric field (BIEF) arises from work function differences, driving electron redistribution and guiding uniform Na+ diffusion. The heterostructure also shows strong affinity for PF6− anions, promoting NaF-rich SEI formation that suppresses electron tunneling and parasitic reactions. Full cells with Na3V2(PO4)3 cathodes achieve 80% capacity retention after 600 cycles at 1 C. Ah-level pouch cells deliver ~200 Wh kg−1 and retain 87% capacity after 150 cycles at 0.5 C. This work establishes a coherent interfacial-kinetics framework for practical AF-SMBs.

Read Full Abstract10.1007/s40843-025-3942-2

Novel CoS/ZnIn2S4 S-scheme heterojunction for efficient visible-light photocatalytic H2O2 production via dual-channel reactions in air

Graphical AbstractVerified

SCIENCE CHINA Materials2026

Novel CoS/ZnIn2S4 S-scheme heterojunction for efficient visible-light photocatalytic H2O2 production via dual-channel reactions in air

Photocatalytic production of hydrogen peroxide (H2O2) using water and O2 offers an economical, environmentally friendly, and sustainable route for H2O2 synthesis. However, current photocatalytic systems suffer from poor charge carrier transport, narrow light absorption, and insufficient active sites, leading to unsatisfactory H2O2 production efficiency. In this study, a CoS/ZnIn2S4 (ZIS) composite was constructed by in-situ growing CoS nanoclusters on ZIS via a solvothermal method for photocatalytic H2O2 production. The integration of CoS with ZIS broadened the light absorption spectrum. The optimized CoS/ZIS-3 composite exhibited an exceptional H2O2 production rate of 2693.39 μmol g−1 h−1 under visible light in isopropanol, surpassing pristine ZIS and CoS by factors of 6.54 and 18.08, respectively. The S-scheme heterojunction and built-in electric field synergistically enhanced the separation and transportation of photogenerated charge carriers, thereby improving photocatalytic efficiency. The H2O2 synthesis mechanism involves dual-channel oxygen reduction and water oxidation reactions mediated by CoS/ZIS. The produced H2O2 effectively degraded organic pollutants and inhibited the growth of E. coli. This study presents a promising green strategy for enhancing ZIS-based photocatalysts through constructing S-scheme heterojunctions for efficient H2O2 synthesis.

Read Full Abstract10.1007/s40843-025-3894-9

Solvation regulation with Janus solvates for sustainable aqueous Zn ion batteries

Graphical AbstractVerified

SCIENCE CHINA Materials2026

Solvation regulation with Janus solvates for sustainable aqueous Zn ion batteries

The uncontrollable Zn dendrites and serious parasitic side reactions of the zinc anode severely impede the practical application of aqueous zinc-ion batteries. In this work, a unique strategy of multipoint solvate coordination center is proposed, which anchors Zn2+ and H2O with complex sites to establish an intermolecular connection within the asymmetric solvation structure. A hydrated deep eutectic electrolyte based on multi-site methylurea (MU) with Janus properties is developed, in which Zn2+ and H2O interact with MU through Lewis acid-base and hydrogen bonding interaction, and the regulated asymmetric solvation configuration can guide the (002)-ordered Zn deposition. Simultaneously, a small amount of polyethylene glycol (PEG, Mw=20000) can facilitate homogenous (002) Zn deposition by suppressing Zn2+ transfer kinetics. Benefiting from the rationally regulated solvation structure and PEG molecules adsorbed onto Zn anodes, the side reactions and Zn dendrites are significantly inhibited. As a result, the Zn||Zn symmetric cell delivers outstanding cycling performance over 3900 h (1 mA cm−2, 0.5 mA h cm−2). In addition, the Zn||V2O5 battery maintains 79.2% capacity retention after 1000 cycles at 1 A g−1. The results suggest a promising oriented regulation strategy for sustainable aqueous zinc-ion batteries.

Read Full Abstract10.1007/s40843-025-3808-x

Interface Engineering of Cu/Cu2O Nanowires on Cu Foam: Boosting C–H Bond Cleavage and Suppressing OH− Adsorption for Efficient Formaldehyde Electrooxidation

Graphical AbstractVerified

SCIENCE CHINA Materials2026

Interface Engineering of Cu/Cu2O Nanowires on Cu Foam: Boosting C–H Bond Cleavage and Suppressing OH− Adsorption for Efficient Formaldehyde Electrooxidation

Formaldehyde oxidation reaction (FOR) demonstrates significant potential in energy conversion and chemical synthesis, yet developing catalysts for efficient operation at high current densities remains a challenge. Herein, we fabricated a Cu/Cu2O heterostructure nanowire catalyst on copper foam (Cu/Cu2O@CF) via interface engineering and investigated its FOR performance. Electrochemical tests show that Cu/Cu2O@CF exhibits excellent activity: it achieves 100 mA cm−2 at an ultra-low potential of −0.05 V (vs. RHE), outperforming most reported catalysts. Notably, this catalyst overcomes the deactivation limitation of conventional Cu-based catalysts above 0.5 V, maintaining a current density of 735 mA cm−2 at 0.6 V with excellent stability during long-term electrolysis. SCN−-induced Cu0 poisoning experiments confirm that Cu/Cu2O@CF retains a Cu/Cu2O mixed structure at 0.6 V, where Cu0-Cu+ synergy dominates its high activity. Density functional theory (DFT) calculations reveal two key advantages of this structure: it weakens OH− adsorption to avoid active site occupation, and reduces C–H bond cleavage barriers while promoting H* combination into H2. Product analysis shows Faradaic efficiencies for formate and H2 production are both ~100%. When coupled with the hydrogen evolution reaction (HER), the system's hydrogen production energy consumption is as low as 0.57 kWh m−3 H2, much lower than traditional water electrolysis. This work elucidates the regulatory mechanism of interface engineering on the FOR performance of Cu-based catalysts, expands the application of Cu-based heterostructures in high-current FOR, and guides the development of industrial-grade electrocatalysts.

Read Full Abstract10.1007/s40843-025-3880-8

A Multifunctional Cerium-Based Metal-Organic Framework Coating for Dendrite-Free and Highly Stable Zinc Metal Anodes

Graphical AbstractVerified

SCIENCE CHINA Materials2026

A Multifunctional Cerium-Based Metal-Organic Framework Coating for Dendrite-Free and Highly Stable Zinc Metal Anodes

Aqueous zinc-ion batteries (AZIBs) face critical challenges from zinc anode instability, including corrosion, hydrogen evolution reaction (HER), parasitic byproduct formation, and uncontrolled dendrite growth. To address these issues, we developed a multifunctional cerium-based metal-organic framework (Ce-MOF) coating for zinc anodes. The coating features an ordered porous structure and inherent properties that mitigate HER, suppress side reactions, and inhibit dendrite formation. Symmetric cells using Ce-MOF/Zn demonstrated exceptional cycling stability for over 2060 h at 0.5 mA cm−2 with a low hysteresis polarization of 26 mV. In full cells with an I2@AC cathode, the Ce-MOF/Zn||I2@AC achieved outstanding cycling stability of 28,550 cycles at 5 A g−1, with 91% capacity retention (109.6 mAh g−1). Through integrated characterization employing in-situ optical microscopy, ex-situ XRD, SEM, and DFT calculations, we elucidated the multifunctional mechanism: the Ce-MOF coating facilitates preferential (002)-oriented Zn deposition to suppress dendrites, reduces Zn2+ desolvation energy to enhance deposition kinetics, and modulates interfacial chemistry to mitigate HER and corrosion. This work establishes Ce-MOF coatings as a simple yet powerful strategy for developing high-performance zinc anodes, providing critical insights for advancing practical AZIB technologies.

Read Full Abstract10.1007/s40843-025-3851-3

Bioinspired Reprocessable Dual Crosslinked Solid-Solid Phase Change Material for Solar-Assisted Thermal Energy Storage and Multi-Scenario Thermal Camouflage

Graphical AbstractVerified

SCIENCE CHINA Materials2026

Bioinspired Reprocessable Dual Crosslinked Solid-Solid Phase Change Material for Solar-Assisted Thermal Energy Storage and Multi-Scenario Thermal Camouflage

Solar energy, a clean and abundant resource, can be stored as latent heat in solid-solid phase change materials (SSPCMs) and subsequently utilized, offering great potential for advancing passive thermal management technologies such as thermal camouflage. Conventional SSPCMs often require active heating for high-temperature conditions, leading to additional energy consumption. Moreover, their permanent crosslinked structures limit reprocessability and increase environmental burden. Herein, we present a lizard-skin-inspired, solar-thermal-responsive, and reprocessable SSPCM (FTSPCM) featuring a dual crosslinked structure composed of dynamic phenol–carbamate bonds and Fe3+@Tannic acid (TA) coordination. Polyethylene glycol (PEG) functions as the phase change segment, while TA introduces both reversible covalent crosslinking and photothermal responsiveness. The FTSPCM exhibits a high latent heat of 102.9 J g−1, excellent shape stability, and maintains its thermal performance after three reprocessing cycles at 120 °C. The Fe3+@TA coordination network enables strong near-infrared absorption and efficient solar-thermal conversion, achieving a surface temperature of 62 °C and a conversion efficiency of 96.85% under 2 Suns irradiation. This dual-function design allows the material to achieve passive thermal camouflage via latent heat release at low temperatures and solar-assisted photothermal heating at high temperatures. This work presents a sustainable strategy for developing reprocessable, solar-responsive SSPCMs, showcasing the distinctive advantages of tannic acid-derived polyphenol chemistry in constructing passive thermal management systems for energy-efficient thermal camouflage and solar-driven thermal energy storage.

Read Full Abstract10.1007/s40843-025-3934-1

Dual-Functional Chemical Pre-Sodiation of Carbon-Coated Hard Carbon Anodes with Initial Coulombic Efficiency up to 99.5% for Sodium-Ion Batteries

Graphical AbstractVerified

SCIENCE CHINA Materials2026

Dual-Functional Chemical Pre-Sodiation of Carbon-Coated Hard Carbon Anodes with Initial Coulombic Efficiency up to 99.5% for Sodium-Ion Batteries

Hard carbon (HC) is a promising anode material for sodium-ion batteries (SIBs) but suffers from low initial Coulombic efficiency (ICE) and unstable solid electrolyte interphase (SEI). Here, we report a dual-functional strategy combining surface engineering and solution chemical pre-sodiation. A graphitic carbon coating on HC acts as a conductive buffer network and shields surface defects, while sodium biphenyl (Na-Bp) pre-sodiation drives sodium ions into the material via a potential difference, inducing a pre-SEI layer that matures into a thin, dense, NaF-rich inorganic SEI during cycling. This approach compensates for irreversible sodium loss and enhances cycling stability. The pre-sodiated electrode (pCH4-HC) achieves an ICE of 99.5% and a reversible capacity of 321.7 mAh g−1, compared to 54.2% for untreated HC. Long-term cycling shows 74.0% capacity retention after 1000 cycles at 300 mA g−1. In full-cells with NaNi1/3Fe1/3Mn1/3O2 (NFM) cathode, pCH4-HC||NFM delivers 81.9 mAh g−1 after 100 cycles, demonstrating excellent stability and rate performance. This dual-strategy approach validates the adaptability of pre-sodiation technology for high-performance SIBs.

Read Full Abstract10.1007/s40843-025-3944-9

A diketimine-linked metal covalent organic framework for efficient photocatalytic CO2 reduction

Graphical AbstractVerified

SCIENCE CHINA Materials2026

A diketimine-linked metal covalent organic framework for efficient photocatalytic CO2 reduction

Metal covalent organic frameworks (MCOFs) are promising photocatalysts for carbon dioxide reduction reaction (CO2RR). However, the synthesis of ketimine-linked COFs remains challenging due to the low reactivity of ketones. Here, we report a straightforward strategy to construct diketimine-linked MCOFs via the condensation of acenaphthenequinone (Ace) with 1,3,6,8-tetra(4-aminophenyl)pyrene (TAPPy). The metal-free COF (TACOF-AA) exhibits AA stacking, while the addition of NiCl2·6H2O under identical conditions yields an AB-stacked Ni-based MCOF (Ni-TACOF-AB). The coordinated Ni species serve as active sites for CO2RR and enhance electron-hole separation. Photocatalytic tests demonstrate that Ni-TACOF-AB achieves a CO evolution rate of 11.71 mmol g−1 h−1 with 99.9% selectivity, which is 7.6 times higher than that of TACOF-AA. Density functional theory (DFT) calculations reveal that Ni-TACOF-AB lowers the activation energy barrier of the rate-determining step by regulating local charge distribution, facilitating electron transfer to adsorbed CO2. This work provides a novel approach for synthesizing ketimine-based COFs and highlights the importance of interlayer stacking in modulating photocatalytic performance.

Read Full Abstract10.1007/s40843-026-4140-9

Suppression of Schottky Effect with Highly Corrosion-Resistant Coating on Porous Transport Layers for Interface Optimization in Proton Exchange Membrane Electrolyzers

Graphical AbstractVerified

SCIENCE CHINA Materials2026

Suppression of Schottky Effect with Highly Corrosion-Resistant Coating on Porous Transport Layers for Interface Optimization in Proton Exchange Membrane Electrolyzers

Proton exchange membrane water electrolyzers (PEMWEs) are pivotal for sustainable hydrogen production, yet the corrosion-induced TiOx on porous transport layers (PTLs) introduces Schottky contact barriers and pinch-off effects, severely impeding charge transfer and efficiency. Here, a cost-effective MoIrOx coating via spray deposition and thermal treatment on Ti felts is proposed. The coating forms a conductive interlayer that establishes a Schottky barrier staircase, reducing the effective electron transfer barrier and isolating TiOx from the ionomer to mitigate the pinch-off effect. The optimal PTL achieves a current density of 3.27 A cm−2 at 2 V, surpassing uncoated Ti felts by 59.5%. The MoIrOx interlayer suppresses localized electron accumulation at the interface, enabling stable operation with ultra-low catalyst loadings by preventing direct ionomer-TiOx contact. This work demonstrates a scalable strategy to enhance PEMWE efficiency and durability while minimizing precious metal reliance, offering critical insights into interface engineering for electrolyzers.

Read Full Abstract10.1007/s40843-025-3769-2

Peripheral nitrogen microenvironment engineering of Cu–N4 single-atom catalysts enables selective electrochemical CO2 reduction to formate

Graphical AbstractVerified

SCIENCE CHINA Materials2026

Peripheral nitrogen microenvironment engineering of Cu–N4 single-atom catalysts enables selective electrochemical CO2 reduction to formate

Rational design of metal–nitrogen–carbon (M–N–C) single-atom catalysts (SACs) for selective CO2 electroreduction is still largely guided by first-shell coordination engineering, while the catalytic impact of the surrounding non-coordinated “second-shell” microenvironment remains underexplored. Here, we show that tailoring the peripheral nitrogen microenvironment can decisively switch product selectivity in Cu-based SACs, even with an identical Cu–N4 first-shell motif. Using a polymer coordination strategy, pyrrolic-N–regulated Cu–Npr–C and pyridinic-N–regulated Cu–Npy–C exhibit strikingly divergent behaviors: Cu–Npr–C selectively produces formate with 72.6% Faradaic efficiency (FE) at −0.7 V vs. RHE and sustains >67% FE over 10 h, whereas Cu–Npy–C predominantly drives H2 evolution (up to 69% FE). In situ attenuated total reflection surface enhanced infrared spectroscopy captures an earlier emergence of the key HCOO* intermediate on Cu–Npr–C, evidencing accelerated formate-pathway kinetics enabled by the pyrrolic microenvironment. Density functional theory calculations further support that pyrrolic second-shell regulation promotes the O-bound formate route while disfavoring hydrogen adsorption, whereas the pyridinic microenvironment renders H adsorption more competitive and biases the reaction toward hydrogen evolution reaction. Extending this second-shell strategy to Ni SACs confirms its generality: Ni–Npy–C achieves 96.8% CO selectivity, while Ni–Npr–C shows mixed CO/H2 production. This work establishes second-shell microenvironment regulation as a general and actionable design principle for steering selectivity in M–N–C SACs toward targeted CO2 reduction products.

Read Full Abstract10.1007/s40843-026-4178-y

Promotion of efficient chlorine evolution reaction by d-p hybrid orbitals in hollow porous CoNiSe2/NiSe2 nanosheet arrays

Graphical AbstractVerified

SCIENCE CHINA Materials2026

Promotion of efficient chlorine evolution reaction by d-p hybrid orbitals in hollow porous CoNiSe2/NiSe2 nanosheet arrays

The global demand for chlorine gas continues to rise, driven by its indispensable role in chemical synthesis, disinfection, and wastewater treatment. Electrocatalytic chlorine evolution from seawater presents a promising alternative to the energy-intensive chlor-alkali process, yet it is hampered by the competing oxygen evolution reaction and the sluggish kinetics of chlorine evolution on conventional catalysts. Here, we report a novel hollow porous CoNiSe2/NiSe2 heterostructure nanosheet array synthesized via ion exchange and calcination, which exhibits exceptional catalytic activity and selectivity for the chlorine evolution reaction in acidic seawater-like electrolytes. The unique hollow porous morphology provides a high specific surface area, facilitating mass transport and exposing abundant active sites. Crucially, the heterointerface between CoNiSe2 and NiSe2 promotes d-p orbital hybridization between Co/Ni 3d and Se 4p states, which lowers the reaction energy barrier for chlorine evolution. The catalyst achieves a low overpotential of 108 mV to reach a current density of 100 mA cm−2 in 4.0 M NaCl acidic medium, with excellent stability and Cl2 selectivity. This work demonstrates the potential of non-noble metal selenides as efficient and durable catalysts for chlorine production, offering a pathway toward more sustainable chlor-alkali technology.

Read Full Abstract10.1007/s40843-025-3823-4

A single-atom COF/CdS S-scheme photocatalyst for COF thickness-dependent CO2 photoreduction

Graphical AbstractVerified

SCIENCE CHINA Materials2026

A single-atom COF/CdS S-scheme photocatalyst for COF thickness-dependent CO2 photoreduction

Photocatalytic CO2 reduction is an attractive route to address sustainable energy crises and environmental issues, yet its efficiency is limited by poor charge separation, narrow light absorption, sluggish kinetics, and low CO2 adsorption/activation. Here, a series of Co SA-TT-COF/CdS S-scheme heterojunction photocatalysts were synthesized by integrating Co single atoms (Co SA) decorated covalent organic frameworks (COFs) with CdS nanotubes via in situ condensation and post-modification. The TT-COF layer thickness on CdS was regulated to optimize active site density and accessibility. The optimal Co SA-TT-COF/15 wt% CdS heterojunction, with a TT-COF thickness of 50.5 nm, achieved a CO production rate of 14157 μmol g−1 h−1 and a selectivity of 90.9%, among the best COF-based photocatalysts reported. Theoretical calculations, experiments, and femtosecond transient absorption spectroscopy revealed that the S-scheme heterojunction enhances the built-in electric field, optimizes energy levels, narrows bandgaps, extends light harvesting, improves charge separation and transfer kinetics, and lowers energy barriers for CO2 adsorption/activation, directly contributing to superior performance.

Read Full Abstract10.1007/s40843-025-3859-y

Isotope-Engineered Hexagonal Boron Nitride Films Synthesized by Plasma-Enhanced Chemical Vapor Deposition from Elemental Boron and Nitrogen Precursors

Graphical AbstractVerified

SCIENCE CHINA Materials2026

Isotope-Engineered Hexagonal Boron Nitride Films Synthesized by Plasma-Enhanced Chemical Vapor Deposition from Elemental Boron and Nitrogen Precursors

Hexagonal boron nitride (hBN) is indispensable for next-generation electronics and quantum technologies, yet controlled synthesis of isotopically engineered hBN with macroscopic scalability and atomic-level precision remains challenging. Here, we present a plasma-enhanced chemical vapor deposition (PECVD) method using elemental boron (B) and nitrogen (N) precursors to achieve wafer-scale growth and precise isotopic control of hBN films. High-quality hBN films are synthesized on Cu substrates via optimized B evaporation and N2 plasma activation. The growth mechanism involves an oxygen-mediated pathway for B transport and a layer-by-layer (Frank-van der Merwe) mode for multilayer formation. By employing isotopically enriched B powders (10B and 11B) and N2 gases (14N2 and 15N2), we demonstrate tunable isotopic compositions with phonon mode shifts quantitatively matching harmonic oscillator predictions. Furthermore, we realize unprecedented in-plane h10BN-h11BN heterostructures through dynamic B source switching during growth. This PECVD strategy establishes a transformative synthesis platform merging industrial-scale production capacity with atomic-scale isotopic precision, enabling new opportunities to engineer thermal transport, optical response, and quantum coherence in two-dimensional materials.

Read Full Abstract10.1007/s40843-025-3862-x