SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4242-1
Infected bone defects remain a formidable clinical challenge due to the coupled pathologies of bacterial infection and impaired osteogenesis. Conventional treatments often fail to address the dynamic microenvironment, leading to persistent infection and inadequate bone repair. Here, we report a microenvironment-adaptive hydrogel incorporating a Ti3C2Tx MXene-based coordination nanoreactor that orchestrates an immune-osteogenic cascade. The nanoreactor, constructed by coordinating Fe3+ ions onto MXene nanosheets, exhibits pH- and reactive oxygen species (ROS)-responsive release of Fe3+ and MXene, enabling sequential antibacterial and pro-osteogenic activities. In vitro studies demonstrated that the hydrogel eradicated Staphylococcus aureus and Escherichia coli (>99.9% killing) within 6 h via synergistic photothermal and chemodynamic effects, while simultaneously scavenging excess ROS to mitigate oxidative stress. Notably, the released Fe3+ ions promoted M2 macrophage polarization, as evidenced by a 2.5-fold increase in CD206 expression, and subsequently enhanced osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs), with alkaline phosphatase activity elevated by 1.8-fold and alizarin red staining intensity increased by 2.2-fold. In a rat model of infected calvarial defects, the hydrogel significantly accelerated bone regeneration, achieving a bone volume fraction of 78.4% at 8 weeks post-implantation, compared to 35.2% in the untreated control. Micro-CT and histological analyses confirmed robust new bone formation and complete infection clearance. This study presents a paradigm for designing adaptive biomaterials that integrate infection control and bone regeneration, offering a promising strategy for treating infected bone defects.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4287-1
Atomic-level manufacturing is a frontier technology enabling materials to achieve ultimate performance. This study explores the potential applications and critical scientific issues of metal atomic clusters, which are predominantly used in catalysis but suffer from intrinsic instability, leading to low yield, inconsistent size and structure, and susceptibility to agglomeration, oxidation, and sintering. We propose a novel concept: employing oxidized metal atomic clusters as dopants in oxygen-bearing materials, such as oxide dispersion strengthened (ODS) alloys, oxide-based cermets, and toughening ceramics. Using ODS alloy as a proof-of-concept, Ni-NiO coupled cluster-strengthened metallic Ni exhibits finer grains, a larger proportion of low-angle grain boundaries, higher geometrically necessary dislocation density, and achieves a 38% enhancement in Vickers hardness. To advance this concept, four critical scientific issues require resolution: oxidation control, disaggregation and dispersion, effectiveness comparison, and physicochemical behaviors and mechanisms. This work bridges the gap between atomic-level manufacturing and structural materials, offering a pathway to overcome the instability of metal clusters by leveraging their oxidation characteristics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4110-9
Flexible tactile sensors are pivotal for human-machine interaction, yet accurate decoupled sensing of three-dimensional (3D) forces and integration into functional systems remain challenging. Here, we present a piezoresistive 3D force sensor based on ionic hydrogels that detects and analyzes multi-directional forces. The sensor exhibits a linear response to normal forces from 1 to 25 N (R²=0.99) and maintains stable sensitivity for shear forces within 0–4 N. By incorporating both force magnitude and direction, the sensor enables multidimensional password input, expanding traditional one-dimensional passwords into numeric, alphabetic, and Morse code formats. Experimental results demonstrate significant potential for enhancing information security. The sensor's simple structure, mature fabrication, and ease of integration with flexible electronics underscore its practicality. This work addresses the bottleneck of unidirectional sensing in conventional flexible pressure sensors, offering a robust solution for multidimensional force acquisition in human-machine interfaces, soft robotics, and biomechanical monitoring.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3664-x
The proliferation of electronic devices and wireless communications has escalated the demand for materials that simultaneously provide electromagnetic interference (EMI) shielding and infrared (IR) thermal camouflage, a combination critical for military and civilian applications. Traditional metallic shields suffer from high density, poor processability, and cost, while polymer-based alternatives often lack sufficient shielding effectiveness and environmental stability. Here, we report a multilayer composite film fabricated via layer-by-layer vacuum filtration and hot-pressing, integrating modified aramid nanofibers (ANF) and MXene (Ti3C2Tx) nanosheets. The film architecture comprises ANF-polypyrrole (ANF-PPy) as the matrix and Ag-MXene as the functional filler, with in-situ grown Ag nanoparticles intercalating between MXene layers to enhance interlayer spacing and electromagnetic wave scattering. At a thickness of only 33 μm, the film achieves an average EMI shielding effectiveness (SE) of 66.75 dB and a specific shielding effectiveness (SSE/t) of 38432.54 dB cm2 g−1. The multilayer structure promotes multiple internal reflections and interfacial polarization losses, while the tight integration ensures high IR reflectivity. This work establishes a foundation for developing multifunctional protective materials with dual EMI shielding and IR camouflage capabilities, addressing the critical bottleneck of simultaneous performance in ultrathin, flexible formats.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3685-7
NiMo-based catalysts are promising for the hydrogen evolution reaction (HER), yet optimizing their electronic structure and enhancing mass transfer remain challenging. Here, we report a route to synthesize two-dimensional (2D) porous Mo2N-Ni heterojunction nanosheets with tuned Ni/Mo ratio for enhanced alkaline HER. The precursor is assembled from polyoxometalate clusters (PMo12) and layered Ni(OH)2. The interaction between PMo12 and Ni(OH)2 suppresses particle agglomeration during pyrolysis, yielding 2D porous sheets composed of small Mo2N-Ni units. Electron transfer from Ni to Mo2N redistributes electrons at the heterojunction, optimizing intermediate adsorption/desorption. The porous structure enhances mass transfer, reducing catalyst impedance. The optimized catalyst exhibits an overpotential of 19 mV at 10 mA cm−2, comparable to commercial Pt/C. An anion exchange membrane (AEM) electrolyzer pairing this catalyst with NiFe-LDH achieves 500 mA cm−2 at 1.80 V and operates stably for 300 h. This assembly method offers a scalable strategy for efficient catalyst production.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4094-8
Deep-blue multi-resonance thermally activated delayed fluorescence (MR-TADF) emitters with high efficiency, high color purity, and high brightness are critically important for next-generation OLED displays, yet remain challenging due to severe aggregation and host-guest interactions in the solid state. Herein, we report a core-encapsulating molecular design strategy in which bulky and non-conjugated peripheral groups are introduced to sterically encapsulate a blue-emitting MR core, thereby suppressing intermolecular π-π interactions without perturbing its intrinsic electronic structure. Two new emitters, DNa-BN and QNa-BN, featuring half-encapsulated and fully encapsulated MR-core architectures, respectively, were developed. Owing to its fully encapsulated structure, QNa-BN exhibits pronounced aggregation resistance at high doping concentrations, maintaining photoluminescence quantum yields exceeding 96%, radiative decay rate constants on the order of 10^8 s−1, and fast reverse intersystem crossing rates (~10^5 s−1). Consequently, sensitizer-free OLEDs based on QNa-BN deliver narrowband deep-blue emission at 458 nm with a full width at half maximum of 22 nm, CIE coordinates of (0.142, 0.085), a maximum external quantum efficiency (EQE_max) of 34.4%, and a maximum luminance exceeding 20,000 cd m−2. Furthermore, by adopting a hyperfluorescence architecture, the EQE_max is further boosted to 38.7% with significantly suppressed efficiency roll-off. This work demonstrates that steric encapsulation of the MR core provides an effective and general approach to achieving aggregation-resistant, high-efficiency, and high-brightness deep-blue MR-TADF emitters for OLED applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3802-0
Exploring efficient bifunctional electrocatalysts for both hydrogen and oxygen evolution reactions is key to water electrolysis. However, the inherently slow reaction kinetics of electrocatalysis are constrained by mass transfer limitations and unsuitable adsorption/desorption dynamics. Herein, a Fe-doped-Ni3S2/NiFeCoCeIn oxide hydroxide (FNS/HEOXY) crystalline–amorphous heterostructure electrocatalyst with a large work function difference (ΔΦ) and strong built-in electric field (BEF) is successfully designed and synthesized. Benefiting from the electron transfer behavior from FNS to HEOXY, the FNS/HEOXY shows outstanding catalytic activity for both hydrogen and oxygen evolution, along with ultra-high stability in an alkaline medium at an industrial-level current density. Moreover, the anion exchange membrane water electrolyzer (AEMWE) assembled by the FNS/HEOXY requires only a minimal cell voltage of 1.83 V to reach 1 A cm−2 at 80 °C. Both experimental and theoretical results confirm the interfacial charge redistribution induced by the strong BEF, thus finely optimizing the adsorption energy. This work proposes a new design principle toward efficient electrocatalysts for energy conversion.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202511078
Municipal solid waste incineration (MSWI) fly ash contains high levels of soluble chlorine and heavy metals, posing environmental risks. This study employed a sequential wet treatment process (water washing–water washing–acid washing–water washing) at a low liquid-to-solid ratio of 2:1 L·kg⁻¹ to enhance the removal of chlorine and heavy metals. Acetic acid and a mixed acid (acetic acid:sulfuric acid molar ratio 1:1) were used as acid washing agents. Results showed that the soluble chlorine content decreased from 23.96% in the raw ash to approximately 0.6%, achieving a removal efficiency of 97.5%. The 3 mol·L⁻¹ acetic acid group exhibited high removal efficiencies for Pb, Cu, and Cd at 52.97%, 29.60%, and 61.54%, respectively, while increasing the stable fraction of heavy metals. However, excessive dissolution of Ca and Al occurred. The mixed acid group demonstrated a 6.9-fold higher 'calcium retention' capacity compared to acetic acid alone, attributed to the presence of sulfate. After treatment, the leaching concentrations of Pb and Zn were significantly reduced to 0.001 mg·L⁻¹ and 0.05 mg·L⁻¹, respectively, meeting the limits of the 'Technical Specification for Pollution Control of MSWI Fly Ash' (HJ 1134—2020). The treated ash exhibited a CaO-SiO₂-MgO-Al₂O₃ system, suitable for building material applications. This study provides technical support for on-site, building-material-oriented disposal of MSWI fly ash.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3918-x
Electrochemical seawater electrolysis powered by renewable energy is a highly promising route toward sustainable hydrogen production, mitigating both energy shortages and carbon emissions. However, chloride-induced corrosion and competitive chlorine evolution reactions lead to metal site dissolution, severely impairing durability, especially at industrial-level current densities. Here, we report a nitrite-incorporated cobalt-iron layered double hydroxide (CoFe-NO2−-LDH) electrocatalyst that exhibits exceptional activity and stability for seawater splitting. The nitrite anion acts as an electronic pump: it accepts electrons to facilitate the formation of high-valence Fe species essential for initial OER activation, and donates electrons under high potential to suppress oxidative dissolution. Moreover, the negatively charged nitrite generates an electrostatic repulsion field that effectively repels chloride ions, protecting metal active sites from corrosion and segregation. The in situ characterization confirms that nitrite doping weakens the Fe–O covalency, which suppresses lattice oxygen participation and promotes a stable adsorbate-evolving mechanism, consequently leading to significantly enhanced operational stability. When used as an anode, the CoFe-NO2−-LDH catalyst achieves over 1000 h of stable operation at 1000 mA cm−2 in seawater electrolysis, demonstrating great potential for practical applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3825-x
Polymer-based dielectric materials with high energy density and thermal stability are critical for modern electric/electronic industries. Polyimide (PI) based materials are promising due to their high temperature resistance and chemical inertness, yet their inherently low dielectric constant and limited charge-discharge energy density restrict applications in film capacitors. While incorporating ferroelectric or conductive fillers can enhance dielectric performance, batch-to-batch inconsistency and physical deterioration remain problematic. This study focuses on molecular structure design and modulation, preparing hyperbranched polyimides with different dianhydride monomers and branching degrees. The effects of chain packing density with polar groups on dielectric and energy storage performances were systematically investigated via experimentation and molecular simulation. Results demonstrate a significant correlation between monomers' electrical distribution and packing density in polymer systems. Molecular simulation further elucidated the underlying mechanism. This work establishes a foundation for designing polymer-based dielectric materials with high dielectric and energy storage performances at the molecular level.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202608018
Chlorinated volatile organic compounds (CVOCs) are volatile, difficult to degrade, and highly toxic, posing serious threats to the atmospheric environment and human health. Catalytic oxidation is currently one of the mainstream methods for CVOCs abatement, owing to its high efficiency, safety, and economic feasibility, and its key aspect lies in the design and development of high-performance catalysts. In the catalytic oxidation of CVOCs, the poisoning effect of chlorine species on catalysts severely restricts catalytic performance. Ru-based catalysts, which exhibit excellent catalytic oxidation activity toward CVOCs and favorable chlorine-resistant performance, have been widely studied in recent years. This paper reviews the latest research progress on Ru-based catalysts for the catalytic oxidation of CVOCs. The mechanism of catalytic oxidation of CVOCs by Ru-based catalysts is elucidated through a systematic analysis of the relevant literature. Furthermore, the strategies for the design and structural regulation of Ru-based catalysts are outlined from the perspectives of active components, supports, and surface modification. Finally, novel preparation methods for Ru-based catalysts and the influence of reaction components on catalytic performance are summarized. Future research directions in this field are also prospected, aiming to provide a reference for the subsequent design and development of high-performance Ru-based catalysts suitable for complex operating conditions.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202608026
Biochar and microbial inoculants are widely used for agricultural soil amendment. To investigate the effects of different straw biochars and Bacillus subtilis inoculant, applied individually or combined, on nitrogen transformation in dryland soil, a 60-day laboratory incubation experiment was conducted with six treatments: control (CK), 4% rice straw biochar (S), 4% rapeseed straw biochar (Y), 4% rice straw biochar plus 5 mg/kg inoculant (SJ), 4% rapeseed straw biochar plus 5 mg/kg inoculant (YJ), and inoculant alone (J). Results showed that rice straw biochar significantly increased soil nitrate nitrogen content by 148.74%–152.68% compared to CK, enhancing nitrification. Combined application with inoculant further increased average net nitrogen mineralization rate by 77.28%–99.38%. Conversely, rapeseed straw biochar decreased nitrate nitrogen by 51.66%–57.61%, and combined application reduced net nitrogen mineralization rate by 82.07%–84.73%. Treatments S, Y, SJ, and YJ promoted microbial biomass nitrogen (MBN) synthesis, with S and Y increasing MBN by 2.02- and 2.20-fold over CK, respectively. Combined treatments further increased MBN by 103.26%–149.44% relative to single biochar treatments. These findings indicate that biochar type governs nitrification and net nitrogen mineralization, while combined application exerts synergistic effects on MBN. For comprehensive dryland soil improvement, YJ treatment is optimal, reducing inorganic nitrogen loss risk and enhancing microbial nitrogen activity.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4196-x
Aqueous zinc-ion batteries (AZIBs) are promising for safe, low-cost energy storage, but accurate cathode characterization is essential for understanding their electrochemical behavior. This study identifies a critical artifact: routine air-drying of deeply discharged cathodes triggers spontaneous aerial oxidation, which distorts post-mortem analysis. Using NH4V4O10 (NVO) as a model cathode, we show that ex situ X-ray photoelectron spectroscopy (XPS) of discharged electrodes reveals only V4+/V5+ signals, with no detectable V3+, implying a theoretical capacity of only 245.5 mAh g−1, yet experimentally measured capacity reaches ~334.5 mAh g−1 at 0.2 A g−1. This discrepancy arises because air exposure during sample preparation oxidizes the reduced vanadium states, leading to a self-charging effect that recovers ~83% of capacity. Electrochemical re-oxidation (EO-NVO) is superior to aerial oxidation (AO-NVO), producing a stable, long-range ordered bulk structure with efficient Zn2+ transport channels, whereas aerial oxidation induces only superficial changes and structural disorder. These findings resolve a key analytical inconsistency and reveal a novel capacity-contribution pathway, with direct implications for accurate material assessment and advanced battery design.