SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4383-8
Conventional cancer therapies remain constrained by undruggable oncogenic proteins and acquired resistance. Proteolysis targeting chimeras (PROTACs) have emerged as a transformative modality that harnesses the ubiquitin-proteasome system to selectively degrade target proteins, offering advantages over traditional small-molecule inhibitors. However, clinical translation of PROTACs is impeded by intrinsic physicochemical limitations: high molecular weight, poor bioavailability, and lack of tumor-specific delivery. Integrating PROTACs with nanotechnology has yielded advanced nano-PROTACs platforms. Nanocarriers enhance solubility and stability, optimize pharmacokinetics, and enable spatiotemporally controlled drug release through passive or active targeting. This review systematically summarizes recent advances in engineering multifunctional nano-PROTACs for cancer therapy, with particular emphasis on design strategies by which nanoengineering enhances PROTAC performance. We evaluate how these platforms improve anticancer efficacy and minimize systemic toxicity while exploring their therapeutic potential in monotherapy and synergistic treatment settings. Finally, we discuss current challenges and future perspectives, providing a theoretical and technical foundation for next-generation nano-PROTACs as a precise and potent strategy in precision oncology.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4405-9
Conventional metal-halide X-ray scintillators, including Bi4Ge3O12 (BGO), Cs(Na)I:Tl, and Lu1.8Y0.2SiO5:Ce (LYSO), suffer from hygroscopic decomposition, high-temperature fabrication, and mechanical rigidity, which restrict their deployment in harsh-environment radiography. This study reports a nontoxic zero-dimensional organic–inorganic hybrid copper(I) halide, Cu2I2(C26H36NP)2 (Compound G), synthesized via a room-temperature solution route. The bulky phosphine ligands confer exceptional superhydrophobicity, with the material retaining 91.95% of its initial luminescence after 30 days of water immersion. A flexible scintillator screen fabricated from styrene-ethylene-butene-styrene (SEBS) exhibits a light yield of ~32,500 photons MeV-1, a spatial resolution of 19.14 lp mm-1, and a detection limit of 0.8 μGyair s-1. The screen enables stable X-ray imaging under flexible, high-temperature, and underwater conditions, eliminating vignetting and distortion in nonplanar objects. These metrics demonstrate that the superhydrophobic copper(I) halide scintillator addresses the water-stability bottleneck of commercial scintillators while delivering competitive light output and resolution, offering a viable pathway for medical diagnosis, nondestructive inspection, security checking, and space exploration.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3605-0
Nickel oxide (NiOx) is widely used as a hole transport material in inverted perovskite solar cells (PSCs). However, its practical application is limited by low intrinsic conductivity and insufficient hole extraction ability, leading to significant interfacial defects that reduce device efficiency and stability. To overcome these issues, two isomeric small organic molecules, 2,6-NOT and 1,5-NOT, were developed and introduced to modify NiOx. These isomers share the same structure but differ in the substitution positions of functional groups, resulting in distinct molecular planarity. Experimental results demonstrate that 1,5-NOT, featuring extended conjugation and enhanced planarity, more effectively enhances the hole extraction/transport capabilities and conductivity of NiOx compared to 2,6-NOT. The NiOx/1,5-NOT-based device achieves a remarkable power conversion efficiency (PCE) of 24.20%, along with excellent long-term stability, surpassing the NiOx control device (18.12%) and the 2,6-NOT-based device (21.87%). These findings indicate that modifying NiOx with small organic molecules significantly improves charge transport performance, and increasing molecular planarity is particularly beneficial for enhancing hole transport and reducing defect density, thereby increasing both efficiency and stability. This work provides a new strategy for NiOx modification via small organic molecules, offering a promising route to high-performance inverted PSCs.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3669-1
Halide perovskite light-emitting diodes (PeLEDs) have advanced rapidly due to their high photoluminescence quantum yield, tunable bandgap, and color purity. However, conventional perovskites exhibit small exciton binding energies, which weaken radiative recombination and limit external quantum efficiency (EQE). Strong spatial confinement strategies, such as thin films, small grains, or quantum-confined structures, have boosted EQE beyond 20% but introduce Auger recombination and ion migration, causing efficiency roll-off and instability. This commentary highlights a novel approach by Xiao et al. (Nature, 2025) that employs weakly space-confined all-inorganic CsPbBr3 perovskites, synthesized using sacrificial additives hypophosphorous acid (HPA) and ammonium chloride (NH4Cl). This method yields highly oriented monocrystalline domains exceeding hundreds of nanometers with no observable grain boundaries, contrasting with control films (submicrometre grains with abundant boundaries) and strongly confined systems (~20 nm crystallites with organic ligands). The reduced grain boundaries lower defect density and block ion migration, while controlled crystallization suppresses vacancies and lattice distortions, enhancing carrier mobility and raising the ion migration energy barrier. The strategy achieves record-breaking performance and stability, addressing EQE roll-off and operational lifetime limitations. This approach offers a versatile framework for other all-inorganic perovskite systems, advancing PeLEDs toward practical high-brightness displays and lighting.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202507021
The accumulation of heavy metals in soil around municipal solid waste landfills poses potential risks to human health. This study selected a municipal solid waste landfill and monitored the concentrations of eight heavy metals (Zn, Pb, Cd, Ni, Hg, Cu, As, Cr) in surrounding soil. The geo-accumulation index method was used for pollution assessment, and a health risk assessment model recommended by the USEPA, combined with Monte Carlo uncertainty analysis, was employed to evaluate the pollution status and health risks to nearby residents. Results showed that among the eight metals, Pb, Ni, and Cd exceeded risk screening values at 4.26%, 6.38%, and 4.26% of sampling points, respectively. Geo-accumulation indices indicated overall clean conditions (mean < 0), but slight pollution by Pb, Zn, Ni, Hg, and Cd at some points. Probabilistic risk assessment based on Monte Carlo simulation revealed that for both adults and children, the cumulative non-carcinogenic risk was negligible, while carcinogenic risk was acceptable. However, there was a very low probability (approximately 0.2%) of non-carcinogenic risk for children, and probabilities of unacceptable carcinogenic risk were 0.64% for adults and 3.21% for children. Nickel was the primary contributor to carcinogenic risk, and children faced higher health risks than adults. These findings provide a reference for pollution prevention and health risk management of soil around municipal solid waste landfills.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(25)60581-0
Lignin-derived oxygenated aromatics, particularly phenols and aromatic ethers, are promising feedstocks for synthesizing high-density, high-heat-sink aviation fuels via alkylation-hydrogenation processes. This study systematically evaluates the catalytic performance of various zeolites (Hβ, HZSM-5, MCM-41, and HUSY) in the alkylation of phenol with cyclohexanol. Characterization demonstrates that HUSY zeolite exhibits superior catalytic activity due to its favorable pore architecture and well-balanced acid site distribution, which synergistically facilitate molecular diffusion and catalytic transformations. To further enhance catalytic properties, HUSY was modified with citric acid at various concentrations and compared with NaOH and oxalic acid treatments. Results reveal that citric acid treatment preserves crystallinity while modulating acidity and pore structure. All modified zeolites enhance phenol alkylation activity. Notably, HUSY-0.5M, exhibiting the highest medium-strong acid to total acid ratio, achieves superior performance: 80.4% phenol conversion and 99.6% selectivity for alkylation products. The catalyst also shows high activity for various lignin-derived compounds (p-cresol, anisole, guaiacol), demonstrating broad applicability. This work provides a new strategy for valorizing lignin-derived phenols into high-value fuel precursors through alkylation.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025022102
Organophosphate pesticides (OPs), the most extensively used insecticides globally, are ubiquitous in environmental matrices and agricultural products, leading to widespread human exposure. This systematic review evaluates the impact of OP exposure on pregnancy complications and adverse birth outcomes, synthesizing evidence from 58 epidemiological studies published between January 2001 and July 2024. Exposure assessment methods, including biomarkers such as urinary dialkyl phosphates, are critically examined. The review finds significant associations between OP exposure and increased risks of spontaneous abortion, gestational diabetes mellitus, gestational hypertension, preeclampsia, preterm birth, and adverse birth outcomes such as low birth weight and reduced head circumference. Potential mechanisms include paraoxonase 1 (PON1) genotype polymorphisms affecting detoxification capacity, oxidative stress, inflammation, metabolic disruption, and altered placental gene networks. The review highlights inconsistencies across studies due to variability in exposure assessment, timing, and population susceptibility. Future research should prioritize longitudinal designs, repeated biomarker measurements, and consideration of PON1 genetic variants to clarify causal relationships and susceptible windows. This comprehensive synthesis provides critical insights for regulatory policies and clinical interventions aimed at mitigating maternal and child health risks from OP exposure.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3942-2
Anode-free sodium metal batteries (AF-SMBs) are promising for high-energy, low-cost energy storage, but suffer from interfacial instability due to sluggish Na+ kinetics and non-uniform deposition. Here, we report a scalable electrospinning-pyrolysis route to anchor FeCoNiCuMn high-entropy alloy (HEA) nanoparticles on N-doped carbon nanofibers (HEANCF). Density functional theory (DFT) calculations reveal high binding energy toward Na atoms, facilitating desolvation and adsorption. A built-in electric field (BIEF) arises from work function differences, driving electron redistribution and guiding uniform Na+ diffusion. The heterostructure also shows strong affinity for PF6− anions, promoting NaF-rich SEI formation that suppresses electron tunneling and parasitic reactions. Full cells with Na3V2(PO4)3 cathodes achieve 80% capacity retention after 600 cycles at 1 C. Ah-level pouch cells deliver ~200 Wh kg−1 and retain 87% capacity after 150 cycles at 0.5 C. This work establishes a coherent interfacial-kinetics framework for practical AF-SMBs.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202511003
Tailings dam leakage can cause secondary sudden water pollution events, imposing severe combined stress of high turbidity and heavy metal contamination on natural water bodies within a short period, threatening aquatic ecological security. Existing studies have systematically revealed the pollution characteristics and biological effects of such events, which are fundamentally distinct from natural high-turbidity water and industrial wastewater leakage. Compared with natural high-turbidity water, tailings leakage inputs finer particles with higher specific surface area, leading to more intense and prolonged turbidity stress. Meanwhile, heavy metals in tailings are more enriched than natural sediments, with higher proportions of active forms and bioavailability, causing significant bioaccumulation and toxic effects, and long-term decline in benthic community species richness. Compared with industrial wastewater leakage, tailings leakage simultaneously releases high concentrations of fine suspended solids and multiple heavy metals, forming a unique 'physical-chemical' combined stress. This synergistic effect amplifies biological toxicity through multiple pathways such as mechanical damage, light limitation, and oxidative stress, resulting in severe and often irreversible ecological damage, such as impaired fish swimming behavior and collapse of benthic community structure. Analyzing the long-term impacts of tailings leakage on aquatic ecosystems from the perspective of combined stress is helpful for providing scientific basis for emergency response and medium-to-long-term ecological risk prevention of related sudden water pollution events.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202509036
Algal-derived phosphorus (P) constitutes a significant fraction in eutrophic lakes, with particulate phosphorus (PP) serving as both a major internal P reservoir and a potential target for P resource recovery. This study proposed a chitosan-coupled electroflotation (CEF) technology for efficient enrichment and recovery of algal-derived P from high-algal water. Using Taihu Lake algae-laden water as the test medium, the effects of chitosan dosage and voltage on the enrichment of different P fractions were systematically evaluated. Results showed that the optimal P enrichment was achieved at a chitosan dosage of 15 mg·L−1, and higher voltages further enhanced the enrichment efficiency. Under optimal conditions, PP accounted for 83.57% of the enriched P, indicating a strong capability for particulate P capture. The mechanism involved chitosan-induced flocculation via charge neutralization and sweep flocculation, while higher voltages increased the positive charge density of chitosan molecules, enhancing charge neutralization and electroflotation. In P release experiments, open conditions significantly promoted the transformation of PP to dissolved P, whereas closed conditions inhibited this process. Additionally, chitosan's antibacterial action and physical retention effectively limited P release. Compared with conventional metal salt coagulants, this method avoids metal ion residues, offering high environmental safety and providing a green and feasible approach for the harmless disposal and resource utilization of algal-derived P in eutrophic lakes.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60661-5
Hierarchical aluminum-rich zeolites are promising catalysts for Knoevenagel condensation, but their synthesis is often costly and energy-intensive. This work reports a green route to hierarchical NaY zeolite using submolten salt (SMS) activated perlite as the sole silicon and aluminum source. The product exhibits high purity and crystallinity, with a framework SiO2/Al2O3 molar ratio of approximately 4.2, intercrystalline mesopores centered at about 20 nm, large external surface area, and abundant basic sites. Crystallization studies reveal that small crystals initially assemble on the activated perlite surface, then grow and aggregate to form a crystal-packed morphology with intercrystalline mesopores. In the Knoevenagel condensation of benzaldehyde with ethyl cyanoacetate, the hierarchical NaY zeolite achieves higher benzaldehyde conversion than conventional NaY zeolites, attributed to improved mass transfer and increased basic site accessibility. This work provides a cost-effective and sustainable catalyst while valorizing natural perlite.