SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4435-9
Organic room-temperature phosphorescent (RTP) materials exhibit large Stokes shifts, high signal-to-noise ratios, and long emission lifetimes, positioning them as promising candidates for advanced anti-counterfeiting, bioimaging, sensing, and display technologies. Despite significant progress in molecular design—including radical-based systems, crystal engineering, host-guest doping, polymer matrix confinement, and supramolecular assembly—the integration of these materials with 3D printing remains in its infancy. This review critically examines the design strategies and research advances in 3D-printed organic RTP materials, focusing on the fundamental photophysical processes of intersystem crossing and suppression of non-radiative transitions. We analyze how printing parameters, matrix rheology, and layer-by-layer deposition influence phosphorescence quantum yields and lifetimes. Key challenges such as oxygen quenching, thermal degradation during extrusion, and poor interlayer adhesion are discussed with quantitative benchmarks. The review highlights that current 3D-printed RTP systems achieve lifetimes up to 1.2 s and quantum yields of 12% under ambient conditions, but scalability beyond 100 cm² remains limited by nozzle clogging and slow curing kinetics. By mapping material formulation to printability, we identify operational windows for extrusion-based and vat photopolymerization techniques. This work provides a roadmap for engineers to transition RTP materials from laboratory-scale demonstrations to industrial fabrication of complex 3D architectures with persistent luminescence.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.3724/2097-213X.2025.JFCT.0025
Endogenous alkali and alkaline earth metals (AAEMs) in biomass ash and pyrolysis temperature significantly influence the properties of pyrolysis polygeneration products. This study selected potassium (K+) and calcium (Ca2+) as representative AAEMs, added them at mass ratios of 2%, 5%, and 7% to corn stover via impregnation, and conducted fixed-bed pyrolysis at 400, 500, and 600 °C to investigate the yields and compositions of gas, liquid, and solid products. Results showed that increasing metal ion concentration significantly increased biochar yield, with Ca2+ at 7% achieving 24.96% biochar yield, while bio-oil yield generally decreased. Ca2+ strongly promoted H2 formation due to its Lewis acidity, reaching 32.49% in gas at 7% concentration, and facilitated furan enrichment to 65.88%. K+ at low concentrations favored phenolic formation, while high concentrations promoted ketones and intensified bio-oil cracking. Increasing temperature from 400 to 600 °C decreased biochar yield and increased gas yield, with high temperatures enhancing secondary cracking and reforming, significantly raising H2 and CH4 yields while suppressing oxygenates. At 600 °C, K+ catalysis increased acids to 39.41%, while Ca2+ maintained furans at 65.89%. This study demonstrates that adjusting metal ion concentration and temperature enables directional regulation of high-value bio-oil components and high-energy gases, providing a theoretical basis for optimized biomass pyrolysis utilization.
New Carbon Materials•2026•DOI: 10.1016/S1872-5805(26)61100-6
Sodium-ion capacitors (SICs) are attractive for low-cost and safe energy storage, but their practical development is limited by sluggish Na+ storage kinetics and structural instability of anodes. Control of both bulk structure and surface chemistry can address these limitations. We report a heteroatom-rich porous carbon (HRPC) derived from spores via hydrothermal pretreatment, low-temperature carbonization, and acid-mediated functionalization. The optimized GLSHC-HNO3 anode exhibits hierarchical porosity and multi-element co-doping, enabling rapid ion/electron transport, improved electrolyte wettability, and abundant Na+ adsorption sites. Density functional theory calculations reveal distinct contributions of different heteroatom configurations to sodium adsorption. The HRPC anode delivers an ultrahigh reversible capacity of 446.1 mAh g−1 at 50 mA g−1, retains 237.3 mAh g−1 at 2 A g−1, and shows excellent cycling stability. A full SIC with a polyaniline-derived porous carbon cathode achieves an energy density of 114.4 Wh kg−1 at 290 W kg−1, 43.1 Wh kg−1 at 1450 W kg−1, and a maximum power density of 5800 W kg−1, with 84.3% capacity retention after 5000 cycles and nearly 100% Coulombic efficiency. This work establishes a scalable, sustainable route for converting biomass into high-value carbon anodes, providing a new pathway for high-performance sodium-ion energy storage.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4012-4
Stimuli-responsive fluorescent hydrogels, owing to their tunable optical properties and unique smart response characteristics, have significant potential in encryption applications and information security. However, most current systems are limited to single-stimulus responsiveness and lack the capability for programmable information erasure or multi-modal dynamic synergy. Hence, we propose a multi-stimuli-responsive phase-change hydrogel incorporating aggregation-induced emission hydrophobic carbon dots (AIE-HCDs) and polyethylene glycol (PEG)-cellulose network, demonstrating dynamic fluorescence chromism under various external triggers. The hydrogel exhibits solvent-exchange-triggered fluorescence color changes from blue to red, enabled by the concentration modulation of AIE-HCDs through the exchange between PEG and water. Additionally, the temperature-induced phase transition of PEG from crystalline to molten state modulates the aggregation and dispersion of AIE-HCDs, thereby enabling dynamic fluorescence color changes. The phase transition further confers excellent shape-memory behavior and adjustable mechanical properties, with the tensile modulus varying from 6.28 MPa in the molten state to 36.23 MPa in the crystalline state, while maintaining high transparency (~88% in the molten state). By utilizing micro-contact printing and the multi-stimulus response, an encryption platform enables information to be hidden, selectively read under sequential stimuli (thermal, UV, and solvent), and completely erased upon demand. This strategy demonstrates significant potential for advancing high-level information encryption and anti-counterfeiting technologies.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4181-6
Green hydrogen production via electrocatalytic water splitting is pivotal for sustainable energy, yet the high cost and scarcity of platinum (Pt) catalysts impede large-scale adoption. Ruthenium (Ru)-based materials emerge as promising alternatives, but their performance requires enhancement. Two-dimensional transition metal dichalcogenides (TMDs), particularly ReS2, offer intrinsic 1T' phase with good conductivity and stability, yet suffer from inert surfaces limiting water adsorption. Here, we report a heterostructure comprising Ru nanoclusters anchored on ReS2 nanosheets (Ru/ReS2) to modulate electronic structure via d-p coupling. This design enhances water dissociation kinetics and optimizes hydrogen adsorption free energy (ΔG_H*). The Ru/ReS2 catalyst exhibits superior hydrogen evolution reaction (HER) activity in acidic media, achieving an overpotential of 47 mV at 10 mA cm−2 and a Tafel slope of 38 mV dec−1, outperforming commercial Pt/C (overpotential 54 mV, Tafel slope 45 mV dec−1). Notably, it demonstrates exceptional stability, with negligible degradation after 10,000 cyclic voltammetry cycles, contrasting with Pt/C's 54 mV overpotential increase. Density functional theory calculations reveal that d-p coupling between Ru and ReS2 optimizes the electronic structure, facilitating water adsorption and dissociation. This work provides a rational strategy for designing efficient, durable, and cost-effective HER electrocatalysts for green hydrogen production.