SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3538-6
The understanding of anion transporting behaviors under sub-nanoconfined regimes can guide the design of high-performance anion selective membranes (ASMs), yet it is little known. Here, we build membrane channels that combine physical rigidity with chemical affinity to anions simply through bridging graphene oxide nanosheets with charged linkers. We observe that the rigidly confined interaction imposed by channels to anions can reconfigure hydration shells in varying degrees for different anions via compensating for hydration-induced energy barriers and differentiating their rearrangement behaviors. During the configuration evolution, water molecules within hydration shells would rotate and simultaneously change their distance from the ion center. Based on the big discrepancy in configuration evolution, these membranes can realize ultrahigh selectivity of, for example, 125 for Cl−/SO4^2− and surpass the performance upper bound concerning Cl−/SO4^2− separation by other membranes. The knowledge of the configuration change of hydration shells during the dehydration process will be key to designing next-generation ASMs.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3815-0
The development of bifunctional electrocatalysts capable of integrating biomass-derived platform molecule oxidation with organic reduction offers a promising strategy for simultaneously enhancing energy efficiency and generating high-value chemicals. However, designing catalysts that exhibit both high activity and stability in integrated systems remains a significant challenge. Herein, we report a self-supported electrode composed of nitrogen-doped carbonized wood (NCW) supported NiCo nanosheets (NiCo 0.3/NCW) that enables the electrocatalytic 5-hydroxymethylfurfural oxidation to produce 2,5-furandicarboxylic acid (FDCA) and the nitrobenzene reduction to yield aniline in an integrated electrochemical cell. The NiCo 0.3/NCW electrode achieves the production of FDCA and aniline at a low cell voltage of 1.7 V, with ~99% anodic and ~92% cathodic Faradaic efficiencies, respectively. Experimental characterizations disclose that the hierarchical porous NCW architecture promotes the dispersion of active sites, while nitrogen doping strengthens metal–support interactions. In-situ spectroscopic experiments combined with density functional theory (DFT) calculations reveal that cobalt incorporation tunes the electronic structure of nickel, thus optimizing substrate and intermediate adsorption, and lowering energy barriers. These effects ultimately enhance the performance of the natural wood-derived catalyst in integrated biomass valorization and selective organic electrosynthesis.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.3724/2097-213X.2025.JFCT.0024
This study investigates the thermochemical conversion behavior of microalgae pellets in a molten hydroxide salt (80% NaOH-20% Na2CO3) system and its influence on hydrogen production. By comparing temperature evolution, gas release characteristics, and structural evolution of pellets with and without molten salt, and integrating char alkalization experiments, the regulatory mechanism of molten salt on reaction pathways and hydrogen production was systematically analyzed. Results indicate that molten salt significantly enhances internal heat transfer efficiency, achieving a central heating rate of 177 °C/s, effectively alleviating thermal hysteresis. Concurrently, molten salt promotes pore development through penetration, erosion, and catalytic effects, resulting in a porosity increase of 53.2%–104.3% after 10 s of reaction. Conversion efficiency is markedly improved, with the dominant reaction pathway shifting to char alkalization after only 70 s. Furthermore, when heating rate is increased above 600 °C, hydrogen yield from char alkalization improves more significantly, primarily attributed to the synergistic promotion of molten salt catalysis and rapid heating on volatiles reforming. This study provides a theoretical foundation for understanding efficient hydrogen production from biomass in molten hydroxide salts.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60636-6
Polyoxymethylene dimethyl ethers (DMMx) are promising clean diesel additives. Compared to the traditional aldol condensation route, the one-step oxidative method for producing DMMx directly from methanol is a green synthesis route offering significant advantages. However, due to the complexity of the reaction, a balance must be struck between oxidation depth and C–O chain growth efficiency. This imposes specific requirements on the design of catalysts with multifunctional active sites: the catalyst should possess appropriate oxidative activity, suitable acid strength distribution, and effective synergy between these two functions. To address these challenges, this study designed a sulfuric acid-modified molybdenum-doped NASICON catalyst, which demonstrated favorable catalytic performance in the one-step oxidative synthesis of DMMx from methanol. Over the NSC-Mo-0.5-30% catalyst, methanol conversion rate of 81.3% and the DMMx selectivity of 58.7% were achieved, along with the formation of heavier molecules, as evidenced by the DMM2–6 selectivity of 11.3%. The NH3-TPD, Py-IR and XPS results indicate that the introduction of molybdenum increases the number of weak Lewis acid sites, while sulfuric acid impregnation not only generates gradient-distributed Brønsted acid sites but also promotes the formation of Mo5+/Mo6+ redox pairs. The cooperation of the two types of active sites significantly enhances catalyst performance.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202508101
The emission of sulfur dioxide (SO2) and nitrogen oxides (NOx) from fossil fuel combustion and metal smelting industries poses severe risks to environmental and human health. This study utilized depleted lead-zinc molten slag as a desulfurizer for wet flue gas desulfurization, and the resulting desulfurization slurry was further employed for NOx removal, achieving resource utilization. The desulfurization efficiency of the slag was determined, and NaClO2 was identified as the most effective oxidant when combined with the slag slurry for NOx removal. The effects of NaClO2 concentration, reaction temperature, flue gas flow rate, oxygen concentration, NOx concentration, and pH on removal efficiency were investigated. Optimal conditions were found at NaClO2 concentration of 2.5 mmol·L−1, temperature 45 °C, flue gas flow 200 mL·min−1, O2 volume fraction 10%, NOx volume fraction 0.03%, and pH 6, achieving a NOx removal efficiency of 97.24%. Metal ion experiments revealed that Fe3+, Zn2+, Mn2+, and K+ exhibited synergistic effects with NaClO2, with Fe3+ showing the most significant enhancement. Fe3+ promoted the decomposition of NaClO2 to generate stronger oxidants such as ClO2, thereby enhancing NOx oxidation and absorption. This approach offers a cost-effective and environmentally friendly alternative to traditional selective catalytic reduction, avoiding ammonia slip and secondary pollution.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3790-5
Near-infrared (NIR) phosphors with high quantum efficiency (QE) and thermal robustness are critical for phosphor-converted light-emitting diodes (pc-LEDs). Here, a Cr3+-activated Lu2BaAl4SiO12 (LBASO) garnet phosphor is engineered via chemical unit cosubstitution of [Ba2+-Si4+] for [Lu3+-Al3+] in Lu3Al5O12 (LuAG), inducing a strong crystal field that yields NIR emission at 705 nm. The optimized LBASO:0.07Cr3+ exhibits an internal quantum efficiency (IQE) of 84.82% and external quantum efficiency (EQE) of 46.02%. Notably, it demonstrates anti-thermal quenching (ATQ) with 126.03% of its initial intensity at 498 K under 442 nm excitation, attributed to a wide band gap, weak electron-phonon coupling, defect trap energy levels, high structural rigidity, and optimized electron population distribution. A NIR pc-LED fabricated with this phosphor achieves an output power of 134.99 mW and photoelectric conversion efficiency of 11.4% at 100 mA drive current. These results underscore the potential of LBASO:Cr3+ for applications in plant lighting, night vision, and nondestructive analysis.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202504023
The national standard GB/T 19515—2023, titled "Road vehicles - Recyclability and recoverability - Requirements and calculation methods," has been officially released and implemented. This standard is crucial for guiding automotive manufacturers in selecting recyclable materials for new products and enhancing the potential recyclability and recoverability of vehicles. This paper provides a comprehensive interpretation of the standard, covering its background, significance, technical requirements for the two rates (recyclability rate and recoverability rate), and the calculation methods. The standard aims to assist automotive enterprises in establishing a calculation system for these rates, thereby improving the recyclability performance of vehicles, reducing waste from end-of-life vehicles, and promoting the circular economy within the automotive industry. Key aspects include the alignment with international standards such as ISO 22628 and EU directives, the historical evolution of the standard from 2004 to 2023, and the detailed calculation methodology based on four stages of end-of-life vehicle processing: pre-treatment, dismantling, metal separation, and treatment of non-metallic residues. The paper also highlights the importance of design-phase considerations and the need for manufacturers to collect accurate material data from their supply chains. Future improvements to the standard are discussed, including expanding vehicle type coverage and refining material identification requirements.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4181-6
Green hydrogen production via electrocatalytic water splitting is pivotal for sustainable energy, yet the high cost and scarcity of platinum (Pt) catalysts impede large-scale adoption. Ruthenium (Ru)-based materials emerge as promising alternatives, but their performance requires enhancement. Two-dimensional transition metal dichalcogenides (TMDs), particularly ReS2, offer intrinsic 1T' phase with good conductivity and stability, yet suffer from inert surfaces limiting water adsorption. Here, we report a heterostructure comprising Ru nanoclusters anchored on ReS2 nanosheets (Ru/ReS2) to modulate electronic structure via d-p coupling. This design enhances water dissociation kinetics and optimizes hydrogen adsorption free energy (ΔG_H*). The Ru/ReS2 catalyst exhibits superior hydrogen evolution reaction (HER) activity in acidic media, achieving an overpotential of 47 mV at 10 mA cm−2 and a Tafel slope of 38 mV dec−1, outperforming commercial Pt/C (overpotential 54 mV, Tafel slope 45 mV dec−1). Notably, it demonstrates exceptional stability, with negligible degradation after 10,000 cyclic voltammetry cycles, contrasting with Pt/C's 54 mV overpotential increase. Density functional theory calculations reveal that d-p coupling between Ru and ReS2 optimizes the electronic structure, facilitating water adsorption and dissociation. This work provides a rational strategy for designing efficient, durable, and cost-effective HER electrocatalysts for green hydrogen production.