Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025021702
Bacteria and microorganisms in toilets can enter the air via aerosol plumes generated during flushing, posing potential health risks. This study evaluates the feasibility of electrochemical synthesis of hydrogen peroxide (H2O2) for household toilet disinfection. Disinfection experiments showed that at H2O2 concentrations of 50–200 mg·L−1, bacteria in toilet bowl seal water were completely inactivated within 4–24 h without generating harmful disinfection by-products. By installing a gas diffusion electrode in the toilet tank and utilizing oxygen from air to electrochemically synthesize H2O2 in situ, the total bacterial count in the seal water was reduced by more than 90% during normal toilet use, thereby lowering the risk of disease transmission via toilet aerosols. The results suggest that electrochemical H2O2 synthesis offers a safe, healthy, and environmentally friendly disinfection method for household toilets.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025120801
The interaction between microplastic-derived dissolved organic matter (PSDOM) and iron oxides in soil environments can modulate its photosensitization effects, yet the underlying mechanisms remain elusive. This study investigated the influence of hematite with distinct morphologies—flake-shaped (HNPs) and cubic (HNCs)—on the photosensitization of polystyrene-derived dissolved organic matter (PSDOM). Under 500 W mercury lamp irradiation, both hematite morphologies promoted PSDOM degradation, with HNCs exhibiting superior performance: total organic carbon (TOC) decreased from 18.4 mg·L−1 to 12.3 mg·L−1 within 90 min, compared to 13.3 mg·L−1 for HNPs. Three-dimensional fluorescence spectroscopy indicated that hematite alters the humification process, thereby modifying photosensitization. Electron paramagnetic resonance (EPR) spectroscopy identified the generation of singlet oxygen (1O2), hydroxyl radicals (·OH), and carbon-centered radicals (CH3C(=O)OO·). HNCs significantly enhanced 1O2 production, while HNPs favored ·OH generation; both inhibited CH3C(=O)OO· formation. Quantitative analysis via high-performance liquid chromatography revealed that the steady-state concentration of 1O2 was highest with HNCs, reaching 2.80 times that of the PSDOM control, whereas ·OH concentration peaked with HNPs at 1.98 times the control. Notably, the steady-state concentration of 1O2 was approximately three orders of magnitude higher than that of ·OH. These findings elucidate the morphology-dependent role of hematite in PSDOM photosensitization, providing mechanistic insights into the environmental fate of microplastic-derived organic matter in complex soil systems.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60681-0
The escalation of global warming and climate change necessitates the development of clean energy carriers. Hydrogen, with a high combustion value of 120 MJ/kg and net-zero carbon emissions, is a promising alternative. Catalytic methane pyrolysis offers a route to produce high-purity hydrogen and functional carbon materials simultaneously. However, challenges persist in catalyst deactivation due to carbon deposition and the efficient separation and valorization of carbon byproducts. This review systematically examines recent progress in solid and molten-medium catalysts for methane pyrolysis. It highlights strategies to enhance catalyst stability, including precise control of active sites, alloying, support optimization, and tuning the carbon-catalyst interface. The introduction of molten media catalytic systems, which feature dynamically refreshed gas-liquid interfaces, can fundamentally mitigate deactivation and facilitate continuous carbon separation. The paper discusses reaction mechanisms, catalytic performance, and control of carbon morphology, along with strategies for efficient separation and purification of carbon products in molten media. High-value applications of the produced carbon materials are also explored. The review underscores the potential of methane pyrolysis as a low-carbon technology for hydrogen production, while identifying key research directions for industrial scalability.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4143-9
High-Ni (Ni ≥ 0.9) layered cathodes are being developed to endure high-voltage operations above 4.5 V to boost energy density. However, they face exacerbated chemo-mechanical and electrochemical degradation under high-voltage operation, primarily due to excessive lattice strain and phase distortion during cycling. Here, we engineer a high-Ni, Co-free cathode featuring a multicomponent complex doping-modulated bulk structure, coupled with surface modification via a multifunctional atomic layer deposition-coated LiAlO2 layer. Such a unique framework achieved by surface-to-bulk integrated modification can not only greatly prevent lattice stress-induced mechanical degradation but also effectively mitigate the accumulation of by-products due to surface side-reactions. Moreover, the LiAlO2 nanoshell with exceptional ion conductivity markedly enhances the sur-/interfacial Li-ion migration kinetics, thus rendering low electron/ion-diffusion resistance. The developed cathode breaks through existing voltage constraints without compromising on performance, achieving an exceptional balance between capacity and cycle stability during operation at 4.8 V. Notably, the pouch-type cells utilizing graphite and Li metal anodes demonstrate excellent cyclability under demanding conditions, even operating at high charging cut-off voltages of 4.5 and 4.6 V, respectively.