Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202604007
Low C/N ratios in wastewater treatment plant effluent necessitate external carbon sources for denitrification, but conventional liquid carbon sources are costly and unstable. This study prepared nine composite solid-phase carbon sources by combining PHBV with natural cellulose materials (straw, sawdust, corncob) at different mass ratios. Dynamic release experiments, DOC analysis, UV-Vis spectroscopy, and EEM fluorescence were employed to characterize carbon release. Results showed that increasing cellulose proportion in corncob-based sources led to release patterns opposite to those of straw- and sawdust-based sources. For straw and sawdust, higher cellulose ratios accelerated release rates, increased total release and duration, reduced aromaticity and molecular weight of released DOM, and promoted protein-like components (tryptophan, tyrosine), indicating enhanced bioavailability. Under identical ratios, corncob-based sources exhibited moderate total release, release durations exceeding 134 h, lower DOM aromaticity and molecular weight, and lower humic substance proportion, indicating superior bioavailability and engineering potential. Among the nine sources, JG5, MX5, and CC4 (PHBV:cellulose mass ratios of 4:5, 4:5, and 1:1, respectively) showed optimal comprehensive performance with low theoretical maximum release, long release periods, and high mass transfer coefficients. EEM-PARAFAC identified three DOM components (protein-like C1, C2; humic-like C3), with protein-like components dominating. This study validates the relationship between cellulose proportion and release kinetics and reveals synergistic regulation of DOM components, offering guidance for designing effective solid-phase carbon sources.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3933-9
The global cold chain consumes vast amounts of energy and emits greenhouse gases, while many regions lack proper refrigeration. To address this, we developed a dual-layer electrospun membrane (PZ-PML) for energy-free fruit preservation. The top PVDF-HFP/ZIF-8 layer offers 97.64% solar reflectance and 92.5% mid-infrared emissivity, providing 70 W/m2 radiative cooling. The bottom PAN/MIL-101/LiCl layer, with 2.18 g/g water uptake at 80% RH, delivers ~156 W/m2 evaporative cooling, lowering surface temperature by 6.1 °C under ~400 W/m2 irradiation. The membrane also shows ≥99% antibacterial efficiency against E. coli and S. aureus. Applied to strawberries, it reduced dehydration to 20.2% after 9 days, compared to 68.2% and 74.4% in controls. Additionally, it demonstrates durability, superhydrophobicity, and UV stability. This scalable solution offers energy-free fruit cooling, reducing postharvest losses while maintaining quality and safety.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4169-9
Transition metal fluorides (TMFs) are promising cathode materials for lithium-ion batteries (LIBs) due to their high theoretical capacity and energy density, yet their practical application is hindered by low utilization rates stemming from particle sizes exceeding the effective Li+ transport distance (<20 nm). This work introduces a multiphase metal fluoride composite (MMFC) synthesized via a hydrothermal method, leveraging high-entropy concepts and interface engineering to enhance electrochemical performance. The MMFC, after annealing at 400°C (MMFC-400), exhibits high specific capacity, excellent rate capability, and cycling stability. The multiphase interfaces accelerate Li+ migration kinetics and provide additional active sites, addressing the limitations of conventional TMF cathodes. This study proposes a multiphase interfacial energy storage strategy for advanced TMF cathodes, offering a pathway to high-performance LIBs.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4229-6
The escalating retirement of lithium-ion batteries (LIBs) necessitates efficient recycling technologies to recover cathode materials, particularly lithium iron phosphate (LFP), which dominates the traction battery market. Conventional pyrometallurgical and hydrometallurgical methods are energy-intensive and environmentally burdensome. Here, we report a fluorine doping-assisted direct regeneration strategy for spent LFP (SLFP) cathodes, yielding a regenerated LFP-F (RLFP-F) with a hybrid structure of ordered crystalline and disordered domains. Fluorine doping reduces the Li+ diffusion energy barrier, as evidenced by density functional theory calculations, and strengthens Fe–O bonding, suppressing Fe migration and anti-site defect formation. The O 2p band center shifts downward, increasing the Fe 3d–O 2p energy separation from 3.23 eV in pristine LFP to 3.46 eV in RLFP-F, enhancing structural stability and electronic conductivity. Electrochemical tests demonstrate that RLFP-F delivers a high-rate capability and excellent cycling stability. Life-cycle assessment reveals that direct regeneration consumes only 9.986 MJ kg−1 and emits 0.324 kg CO2-equivalent per kg of cell, significantly outperforming pyrometallurgy and hydrometallurgy. Economic analysis based on 2025 Chinese market prices indicates a net profit of $397.15 per ton of SLFP battery recycling, attributed to the closed-loop cathode-to-cathode design. This work provides a sustainable and economically viable route for upcycling spent LFP batteries.