SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4302-9
The pre-deposited lead iodide (PbI2) film in two-step inverted perovskite solar cells (PSCs) often exhibits a dense structure, which impedes the diffusion and reaction of organic ammonium salts, leading to unreacted PbI2 residues and compromised device performance. To address this, 2,4-oxazolidinedione (OD) is introduced as a molecule additive into the PbI2 precursor solution. Owing to its stronger coordination with PbI2, OD effectively modulates its crystallization behavior, resulting in a porous structure. This porous structure significantly facilitates the diffusion and infiltration of organic ammonium salts, thereby minimizing PbI2 residue and enhancing the completeness of the perovskite conversion. Furthermore, OD and the constructed porous network jointly retard the crystallization kinetics of perovskite, promoting the formation of perovskite films with improved crystallinity and preferred crystal orientation. Therefore, the optimized PSCs achieve a power conversion efficiency (PCE) of 26.31%, and demonstrate excellent operational stability, retaining 90.24% of initial PCE for 1500 h at 25°C and 90.47% after 1000 h at 65°C. The champion device exhibits a VOC of 1.197 V, a JSC of 26.28 mA cm-2, and an FF of 83.58%, with negligible hysteresis. This study presents a straightforward yet effective approach to advancing the performance and stability of inverted PSCs fabricated via the two-step method.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4242-1
Infected bone defects remain a formidable clinical challenge due to the coupled pathologies of bacterial infection and impaired osteogenesis. Conventional treatments often fail to address the dynamic microenvironment, leading to persistent infection and inadequate bone repair. Here, we report a microenvironment-adaptive hydrogel incorporating a Ti3C2Tx MXene-based coordination nanoreactor that orchestrates an immune-osteogenic cascade. The nanoreactor, constructed by coordinating Fe3+ ions onto MXene nanosheets, exhibits pH- and reactive oxygen species (ROS)-responsive release of Fe3+ and MXene, enabling sequential antibacterial and pro-osteogenic activities. In vitro studies demonstrated that the hydrogel eradicated Staphylococcus aureus and Escherichia coli (>99.9% killing) within 6 h via synergistic photothermal and chemodynamic effects, while simultaneously scavenging excess ROS to mitigate oxidative stress. Notably, the released Fe3+ ions promoted M2 macrophage polarization, as evidenced by a 2.5-fold increase in CD206 expression, and subsequently enhanced osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs), with alkaline phosphatase activity elevated by 1.8-fold and alizarin red staining intensity increased by 2.2-fold. In a rat model of infected calvarial defects, the hydrogel significantly accelerated bone regeneration, achieving a bone volume fraction of 78.4% at 8 weeks post-implantation, compared to 35.2% in the untreated control. Micro-CT and histological analyses confirmed robust new bone formation and complete infection clearance. This study presents a paradigm for designing adaptive biomaterials that integrate infection control and bone regeneration, offering a promising strategy for treating infected bone defects.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202604013
Reclaimed water serves as an alternative water source for replenishing natural water bodies, yet residual pollutants pose ecological risks. A pilot-scale hybrid vertical flow constructed wetland filled with manganese ore sand, quartz sand, and cobblestones was operated for approximately 140 days to assess nutrient and organic matter removal, ecotoxicity, and the suitability of manganese sand as a functional medium. Influent concentrations were up to 0.4 mg/L ammonia, 0.2 mg/L phosphate, 8 mg/L nitrate, and 30 mg/L COD. After 2–3 months of operation, ammonia and phosphate removal efficiencies exceeded 90% and 80%, respectively. Average reductions for nitrate and COD were 0.67 mg/L and 4.2 mg/L. Manganese sand enhanced organic decomposition, reducing maximum 3D fluorescence intensity by 26%, humic substances by 48%, UV254 by 38%, and achieving 70.8% removal of four target antibiotics. Purified water exhibited no significant genotoxicity, with micronucleus rates approaching tap water levels, and non-concentrated samples showed no acute biotoxicity. However, concentrated samples displayed acute toxicity, suggesting different causative pollutants for genotoxicity and acute toxicity. The study supports manganese sand as an effective medium for improving reclaimed water quality and controlling ecological risks.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025012002
Acid orange 7 (AO7), a recalcitrant azo dye, poses significant threats to aquatic ecosystems and human health. This study investigates the activation of urea-hydrogen peroxide (UHP) by iron-modified corn straw biochars (Fe-CSBs) for AO7 degradation. Fe-CSBs were synthesized via impregnation-pyrolysis at 300, 500, and 700 °C using ferrous sulfate as modifier. The oxidative removal efficiencies of AO7 by Fe-CSB-activated UHP were compared, and the effects of Fe-CSB dosage, UHP dosage, initial AO7 concentration, initial pH, and coexisting anions (CO3^2−, HCO3^−, Cl^−) were systematically examined. Quenching experiments identified reactive oxygen species, and LC-MS analysis determined degradation intermediates. Results showed that all Fe-CSBs effectively activated UHP, achieving degradation rates of 98.54%, 97.38%, and 98.54% for Fe-CSB300, Fe-CSB500, and Fe-CSB700, respectively, under optimal conditions (0.2 g·L−1 UHP, 0.2 g·L−1 Fe-CSB, 20 mg·L−1 AO7, pH 3, 60 min). CO3^2− and HCO3^− inhibited degradation, while Cl^− had negligible effect. The primary reactive species were hydroxyl radicals (·OH) and singlet oxygen (^1O2). Degradation proceeded via cleavage of the azo bond, forming benzene-containing intermediates, which underwent deamination, desulfurization, and oxidation to smaller organics, ultimately mineralizing to CO2 and H2O. This work provides insights into UHP-based advanced oxidation processes for dye wastewater treatment.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202511002
To treat large-air-volume, low-concentration volatile organic compounds (VOCs) containing tetrachloroethylene (PCE) generated from rubber-metal bonding, this study systematically investigated the adsorption-desorption behavior and interaction mechanisms of PCE, toluene, and methyl isobutyl ketone (MIBK) on granular activated carbon (GAC). Static adsorption experiments showed that PCE adsorption capacity reached 556.6 mg·g−1, while dynamic multi-component adsorption capacity was 179.6 mg·g−1. Kinetic analysis indicated that PCE adsorption was controlled by both intraparticle diffusion and external surface adsorption, whereas toluene and MIBK were primarily intraparticle diffusion-limited. During high-temperature nitrogen desorption, PCE underwent dechlorination, hydrogenation, and recombination, producing trichloroethylene, 1,2-dichloroethane, 1,2-dichloropropane, and HCl, with HCl accounting for 3.61% of the chlorine molar content in adsorbed PCE. After four adsorption-desorption cycles, the iodine value of GAC dropped below the industry standard of 600 mg·g−1; however, water washing and alkali immersion extended the cycle life to 8 and 9 cycles, respectively. The HCl generation pattern in co-adsorption systems was consistent with single-PCE systems. A regeneration process combining alkali immersion and water washing was proposed and integrated into an engineering strategy. Compared to conventional activated carbon adsorption coupled with RTO incineration, the proposed classification strategy reduced annual costs by 49.5×10⁴ CNY. This work provides a cost-effective and safe solution for Cl-VOCs treatment.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025032601
This study investigated the pollution characteristics of chlorate and perchlorate in tea from Anhui region and assessed the health risks associated with tea consumption. A total of 132 tea samples, including green tea (n=89), black tea (n=30), yellow tea (n=10), and white tea (n=3), were collected from major tea-producing areas. Chlorate and perchlorate levels were quantified using isotope dilution liquid chromatography-tandem mass spectrometry. Chlorate was detected in 15.9% of samples, with concentrations ranging from not detected to 0.040 mg·kg−1, and no samples exceeded the regulatory limit. Perchlorate was detected in 100% of samples, with concentrations ranging from 0.011 to 1.611 mg·kg−1, and 2.3% of samples exceeded the limit. Pollution characteristics analysis revealed that perchlorate levels were significantly correlated with tea type and geographical origin, with environmental contamination in tea-growing areas being the primary determinant. A significant positive correlation was also observed between chlorate and perchlorate levels. Health risk assessments were conducted for the general tea-consuming population, sub-groups loyal to specific tea types (green and black tea), and sub-groups preferring local tea from high-pollution regions (Lu'an City and central Anhui). Assessments were based on mean and 95th percentile (P95) exposure levels. For chlorate, the maximum hazard quotient (HQ) was 0.003, far below 1, indicating negligible risk. For perchlorate, all HQ values were below 1, regardless of tea type or region, based on both mean and P95 levels, using the Chinese provisional tolerable daily intake (tTDI). However, perchlorate contamination in central Anhui, particularly Lu'an City, warrants continued monitoring due to elevated levels and occasional exceedances.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3910-0
Perovskite photovoltaics (PVs) have emerged as leading candidates for next-generation solar technology due to low production costs, high efficiencies, and compatibility with large-area manufacturing. However, commercialization faces bottlenecks: toxic solvents, non-uniform film quality over large areas, and insufficient operational reliability. Wang et al. developed a green-solvent ink and a solvent-confinement edge-protection (SCEP) strategy to address these issues. By increasing the fraction of 2-methyltetrahydrofuran (2-MeTHF) in a gamma-valerolactone (GVL) based solvent system, they weakened perovskite-GVL coordination, accelerated solvent extraction during vacuum-chamber drying, and promoted rapid supersaturation toward the desired alpha-phase while suppressing the non-perovskite delta-phase. This resulted in perovskite films with enlarged grains, reduced voids, and improved crystallinity in ambient air. To mitigate edge effects during slot-die coating, they incorporated a cationic surfactant, trimethyltetradecylammonium chloride (TAC), which self-assembled at the liquid-vapor interface, reducing surface tension and inducing Marangoni flow to equalize evaporation. This SCEP strategy suppressed rapid edge evaporation, leading to uniform film morphology. The best-performing modules achieved a total area of 7200 cm², with J-V curves and stabilized efficiency certifications from NREL and TÜV Rheinland, demonstrating commercial viability. This work provides a unified framework for solvent design and process control, advancing perovskite PV modules toward industrial production.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202510071
Carbon source is a critical factor driving heterotrophic denitrification, yet the low carbon-to-nitrogen ratio (C/N) of livestock wastewater limits this process. This study developed novel composite carbon sources by combining corncob (CC) and polycaprolactone (PCL). Static carbon release and denitrification experiments were conducted to evaluate carbon release patterns and nitrogen removal performance. Results showed that the carbon release index (n) was below 0.45, indicating Fickian diffusion as the dominant release mechanism. The composite carbon source prepared at a CC:PCL mass ratio of 3:2 (denoted YP4) achieved a nitrate nitrogen removal efficiency of 94.76%, with effluent ammonia nitrogen meeting the discharge limits of GB 18596-2001. High-throughput sequencing revealed that YP4 increased the relative abundance of genera capable of denitrification and biopolymer degradation (e.g., Aeromonas, Novosphingobium, Bacteroides, and Clostridium sensu stricto), thereby enhancing heterotrophic denitrification and nitrogen removal. These findings provide a novel approach for selecting and preparing external carbon sources for biological heterotrophic denitrification of low C/N wastewater.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4181-6
Green hydrogen production via electrocatalytic water splitting is pivotal for sustainable energy, yet the high cost and scarcity of platinum (Pt) catalysts impede large-scale adoption. Ruthenium (Ru)-based materials emerge as promising alternatives, but their performance requires enhancement. Two-dimensional transition metal dichalcogenides (TMDs), particularly ReS2, offer intrinsic 1T' phase with good conductivity and stability, yet suffer from inert surfaces limiting water adsorption. Here, we report a heterostructure comprising Ru nanoclusters anchored on ReS2 nanosheets (Ru/ReS2) to modulate electronic structure via d-p coupling. This design enhances water dissociation kinetics and optimizes hydrogen adsorption free energy (ΔG_H*). The Ru/ReS2 catalyst exhibits superior hydrogen evolution reaction (HER) activity in acidic media, achieving an overpotential of 47 mV at 10 mA cm−2 and a Tafel slope of 38 mV dec−1, outperforming commercial Pt/C (overpotential 54 mV, Tafel slope 45 mV dec−1). Notably, it demonstrates exceptional stability, with negligible degradation after 10,000 cyclic voltammetry cycles, contrasting with Pt/C's 54 mV overpotential increase. Density functional theory calculations reveal that d-p coupling between Ru and ReS2 optimizes the electronic structure, facilitating water adsorption and dissociation. This work provides a rational strategy for designing efficient, durable, and cost-effective HER electrocatalysts for green hydrogen production.
SCIENCE CHINA Materials•2025•DOI: 10.1007/s40843-025-3480-1
Electrochemical nitrate reduction to ammonia (NRA) offers a sustainable route for wastewater denitrification and decentralized ammonia synthesis, but its practical deployment is constrained by sluggish reaction kinetics and the competing hydrogen evolution reaction (HER). Monometallic Cu electrocatalysts, despite favorable nitrate adsorption and tunable electronic structure, exhibit weak H* adsorption, limiting the hydrogen radical-mediated pathway that suppresses HER at low overpotentials. Here, highly dispersed Cu/WO3 heterojunctions supported on carbon fiber were synthesized via carbothermal shock reduction, which reaches ultra-high temperatures within seconds and prevents active-site accumulation. The optimal Cu/WO3 heterojunction achieves an ammonia yield rate of 158.66 μmol h−1 cm−2 and a Faradaic efficiency of 98.27%. Electron paramagnetic resonance and density functional theory calculations reveal a synergistic mechanism: Cu sites preferentially adsorb NO3−, while adjacent WO3 sites accelerate water dissociation to generate hydrogen radicals (H*), which drive the continuous hydrogenation of nitrate to ammonia. This spatial separation of functions promotes the H*-mediated pathway and suppresses HER. The work establishes a heterojunction design strategy for non-precious-metal NRA electrocatalysts, enabling high-rate, high-selectivity ammonia production under mild conditions.
SCIENCE CHINA Materials•2025•DOI: 10.1007/s40843-025-3643-8
Inverted perovskite solar cells (PSCs) suffer from defect-mediated nonradiative recombination and inefficient charge extraction, particularly at the buried interface and grain boundaries (GBs), which limit power conversion efficiency (PCE) and operational stability. This study introduces a multifunctional phosphonic acid molecule, (2-(3,6-bis(trifluoromethoxy)-9H-carbazol-9-yl)ethyl)phosphonic acid (M28), as an additive in the perovskite precursor solution. M28 spontaneously segregates toward the buried interface and GBs, fulfilling three roles: (1) slowing crystallization to enlarge grains and improve film quality, (2) passivating defects to suppress charge recombination, and (3) inducing p-type doping to create an extra electric field that promotes hole transport. Devices incorporating M28 achieve a champion PCE of 25.96% and retain 80% of initial efficiency after 1500 h of maximum power point tracking. This work demonstrates the efficacy of multifunctional phosphonic acid additives in addressing buried-interface and GB defects, offering a viable route to high-performance, stable inverted PSCs.