SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4377-9
Continuous molecular monitoring on dynamic biological tissues demands electrochemical interfaces that maintain charge transport and reactivity under large mechanical strain. Existing stretchable platforms based on conductive elastomer composites or serpentine metal interconnects suffer from strain-induced disruption of percolation networks, active area fluctuation, and interfacial charge-transfer kinetic degradation, producing baseline drift and signal distortion that preclude reliable operation on skin, stomach, or intestine. Xu et al. (Science, 2026, 392) introduced SIRES, an intrinsically stretchable electrochemical interface that couples a strain-resilient liquid-metal elastomeric architecture with a Randles-circuit-informed design strategy. The platform preserves stable charge transport and electrochemical reactivity during large deformation, enabling high-fidelity multiplexed molecular sensing across diverse dynamic biological surfaces. This highlight analyzes the material-circuit co-design framework, evaluates its performance limits against conventional stretchable electrodes, and identifies remaining barriers in fabrication scalability, encapsulation reliability, and system-level integration. The work establishes a universal design paradigm for soft bioelectronics, with direct implications for wearable and implantable diagnostic translation.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4483-x
The referenced literature comprises five peer-reviewed studies published between 2025 and 2026 in Nature Materials, Journal of the American Chemical Society, Nature Communications, and Science China Materials. These works collectively address the persistent trade-off between open-circuit voltage (Voc) and short-circuit current density (Jsc) in organic photovoltaics (OPVs). Tao et al. (Nat Mater, 2026) demonstrate that narrow-bandgap nonfullerene acceptors engineered to exhibit low energetic disorder achieve power conversion efficiencies (PCEs) exceeding 21%, primarily by suppressing non-radiative recombination losses. Westbrook et al. (JACS, 2025) establish that solid-state packing motifs govern exciton delocalization and photophysics in nonfullerene acceptors, providing a structural handle for reducing energetic disorder. Jiang et al. (Nat Commun, 2025) show that photoluminescent delocalized excitons in donor polymers facilitate efficient charge generation, linking exciton coherence to device performance. Zhang et al. (Nat Commun, 2026) employ synergistic steric hindrance and chlorination to realize binary OSCs with low energy loss, achieving high Voc without sacrificing photocurrent. The cumulative findings indicate that molecular design strategies targeting low energetic disorder and controlled solid-state packing can overcome the longstanding efficiency ceiling of ~20% in OPVs. These results have direct implications for the commercial viability of solution-processed, lightweight, and flexible solar cells, though scalability and long-term stability remain to be validated under industrial manufacturing conditions.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4360-7
Polarization-sensitive photodetection is critical for advanced optical communication and imaging systems, yet conventional photodetectors suffer from low on-off ratios and limited polarization discrimination. Here, we report gate-tunable PdSe2/WSe2 van der Waals heterostructures that achieve ultrahigh light on-off ratio and polarization-sensitive photodetection. The heterostructure forms a type-II band alignment, enabling efficient charge separation and self-powered operation. By applying a gate voltage, the photoresponse can be modulated, achieving an on-off ratio exceeding 10^6 under illumination. The device exhibits a high responsivity of 1.2 A/W and a specific detectivity of 10^12 Jones at room temperature. Polarization-sensitive measurements reveal a linear dichroism ratio of 2.1 at 532 nm, attributed to the anisotropic crystal structure of PdSe2. The photodetector operates over a broad spectral range from visible to near-infrared (400-1000 nm) with fast response times (rise/fall < 100 μs). The gate-tunable capability allows dynamic control of the photocurrent, enabling adaptive sensing applications. These results demonstrate that PdSe2/WSe2 heterostructures are promising candidates for high-performance, polarization-sensitive photodetectors, offering a pathway for next-generation optoelectronic devices.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202605002
The single-phase partial nitrification and anammox (SPN/A) process has seen limited widespread application due to its slow startup and difficulties in enriching anaerobic ammonium-oxidizing bacteria (AnAOB). This study utilized high-ammonia nitrogen wastewater to initiate and enhance the SPN/A process in a pilot-scale integrated fixed-film activated sludge (IFAS) reactor. By establishing an IFAS-SPN/A coupled system based on the symbiotic relationship between biofilm and sludge, rapid startup and efficient AnAOB enrichment were achieved. An innovative sludge inoculation strategy was employed: first, conventional nitrifying sludge was inoculated to initiate shortcut nitrification and allow ammonia-oxidizing bacteria (AOB) to colonize blank carriers; subsequently, anammox sludge was inoculated to promote efficient AnAOB enrichment on the AOB biofilm. The influent was low-temperature shift condensation water from a synthetic ammonia workshop, with an average ammonium nitrogen concentration of 2300 mg/L and COD ranging from 50 to 200 mg/L. The 180-day experiment comprised three stages: shortcut nitrification startup, SPN/A startup, and load intensification. The system successfully started up SPN/A within 120 days, achieving total nitrogen removal efficiency and removal load of (90.21±2.18)% and (0.31±0.07) kg/(m³·d), respectively, through synergistic biofilm and suspended microorganisms. During load intensification, AnAOB relative abundances in biofilm and flocs reached 18.8% and 35.3%, respectively, and removal load increased to (0.64±0.11) kg/(m³·d). Stable influent quality is a prerequisite for efficient and stable nitrogen removal; a surge in influent ammonium concentration caused nitrite accumulation imbalance and deteriorated performance. Adding an equalization tank before the aeration tank mitigates water quality fluctuations, and a 'dilution-reconstruction' strategy for low-ammonia wastewater facilitates rapid recovery after performance deterioration.