SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3761-7
Ruthenium-based materials, including metallic Ru and RuO2, are promising electrocatalysts for electrochemical water splitting (EWS) due to their high activity for both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). However, their practical application is hindered by the relatively strong adsorption of reaction intermediates on Ru surfaces and the oxidative dissolution of RuO2 under operating conditions. This review provides a comprehensive overview of recent progress and challenges in Ru-based electrocatalysts for EWS. We first summarize the fundamentals of EWS, including reaction mechanisms and activity descriptors. Then, we detail typical synthesis methods such as hydrothermal/solvothermal syntheses, organic ligand-assisted syntheses, pyrolysis, acid etching, cation exchange, and molten salt-assisted syntheses. Subsequently, we focus on enhancement strategies, including alloying, doping, structure design, interface engineering, single-atom catalyst design, high-entropy alloy design, phase engineering, and defect engineering, with typical examples illustrating structure-property correlations. Finally, we address remaining challenges and future prospects for the development of efficient and durable Ru-based electrocatalysts for sustainable hydrogen production.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2024100805
A fluorescent metal-organic framework (MOF), PCN-128, was synthesized via a solvothermal method using zirconium tetrachloride (ZrCl4) as the metal source and tetrakis[4-(4'-carboxyphenyl)phenyl]ethylene (H4ETTC) as the organic linker. The resulting material exhibited regular morphology, high crystallinity, strong luminescence, and good stability. PCN-128 was employed as a fluorescent probe for the trace detection of malachite green (MG), a banned veterinary drug, in aquaculture water and freshwater fish tissue. The probe demonstrated exceptional selectivity toward MG among 13 veterinary drugs and robust anti-interference performance against 16 anions, 16 cations, and 12 additional veterinary drugs. The method achieved a broad linear detection range from 0.0 to 7.0 μmol·L−1 with a limit of detection (LOD) of 2.73 nmol·L−1. Spike-and-recovery experiments in three aquaculture water samples and one freshwater fish sample yielded recoveries between 89.80% and 113.7%, with relative standard deviations (RSD) not exceeding 2.59%. These results confirm that the developed method is accurate, reliable, and suitable for routine monitoring of MG residues in aquaculture water and aquatic products, addressing a critical gap in food safety surveillance.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2024113001
Anoxygenic photosynthetic bacteria (APB) are a phylogenetically diverse group of prokaryotes that perform photosynthesis without oxygen evolution. They possess versatile metabolic capabilities, including anaerobic photophosphorylation, carbon fixation, multi-substrate metabolism, and metal oxidation-reduction, enabling them to thrive in diverse environments such as lakes, rivers, soils, salt lakes, and hot springs. APB play a pivotal role in biogeochemical cycling of carbon, nitrogen, sulfur, and metals. This review systematically summarizes the metabolic diversity of APB, emphasizing their ability to utilize organic and inorganic compounds as electron donors and carbon sources. We highlight recent advances in understanding extracellular electron transfer (EET) mediated by exogenous electron shuttles and conductive materials, which expand the electron sources available for energy generation and reducing power. In environmental engineering, APB show promise in carbon sequestration, pollutant degradation (including azo dyes and heavy metals), biohydrogen production, and microbial fuel cells. For instance, Rhodopseudomonas palustris can fix CO2 under dark anoxic conditions via syntrophic interspecies electron transfer, achieving enhanced carbon fixation. Additionally, APB-based biohybrid systems incorporating CdS nanoparticles demonstrate light-driven degradation of azo dyes without external electron donors. Challenges remain in scaling up these technologies, optimizing reactor conditions, and understanding metabolic regulation. Future research should focus on genetic engineering to enhance APB performance and integrating APB into circular bioeconomy frameworks.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60695-0
The direct carbonylation of glycerol with CO2 to glycerol carbonate represents a promising route for CO2 utilization, addressing both carbon emission reduction and the synthesis of value-added chemicals. However, the reaction is thermodynamically limited, resulting in low glycerol conversion, necessitating the use of coupling agents and appropriate catalysts. This review systematically examines recent progress in homogeneous catalysts (inorganic and organic bases) and heterogeneous catalysts (Zn, Cu, Ce, La, Mg, noble metals, modified zeolites, non-metallic materials) for this transformation. Strategies such as metal oxide modification, support optimization, precursor selection, and construction of acidic-basic sites are analyzed for enhancing catalytic performance. The effects of coupling agents including acetonitrile, adiponitrile, 2-cyanopyridine, MgCO3, CaC2, and NaHCO3 are summarized. Notably, 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU), Zn(QTf)2, and metal composite oxides like ZnO-CeO2 have demonstrated promising catalytic performance. Future research directions include developing organometallic complexes or composite metal oxides with highly dispersed active sites and tailored morphologies to modulate surface area, pore size, and acidity/basicity; optimizing coupling agents or designing novel membrane reactors to improve glycerol conversion; and introducing polar solvents to enhance reactant adsorption and activation. These approaches provide valuable references for catalyst design and reaction system optimization in the carbonylation of glycerol with CO2.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60672-X
Dry reforming of methane (DRM) converts CH4 and CO2 into syngas, offering a route to mitigate greenhouse gases. Ni-based catalysts suffer from sintering and carbon deposition at high temperatures. This work employs MgO-MgAl2O4 composite supports to regulate Ni loading and introduces Ce, La, and Zr as promoters to investigate their effects on DRM activity, structural stability, and surface oxygen species. Optimal Ni loading of 12.5% yields highest CH4 and CO2 conversions. Promoter introduction slightly suppresses low-temperature activity but substantially modifies support local structure and metal-support interface, improving NiO dispersion and increasing surface oxygen vacancies and active oxygen species (Oβ). These changes enhance CO2 adsorption-activation and suppress carbon deposition. After 20 h DRM, Ce-promoted catalyst shows smallest Ni particle growth (6.23→8.07 nm) and lowest carbon deposition, demonstrating superior stability and anti-coking capability. The study elucidates how Ce, La, and Zr enhance sintering and coking resistance via interfacial electronic modulation and improved oxygen storage/release, guiding rational design of stable Ni-based DRM catalysts.