SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4263-3
Monolayer black phosphorus (phosphorene) exhibits a direct bandgap and strong in-plane anisotropy, making it a promising candidate for near-infrared (NIR) optoelectronic devices. However, the precise modulation of its excitonic emission via anisotropic strain remains insufficiently understood, particularly regarding the contrasting strain responses of phosphorene versus transition metal dichalcogenides (TMDs). Here, we combine experimental characterization with tight-binding (TB) modeling to elucidate the strain-dependent bandgap evolution in phosphorene. Using a four-band TB model, we derive the bandgap at the Γ point as E_g^BP = 4t1 + 2t2 + 4t3 + 2t5, with hopping parameters t1 = -1.220 eV, t2 = 3.665 eV, t3 = -0.205 eV, t4 = -0.105 eV, and t5 = -0.055 eV. Under tensile strain along the zigzag (ZZ) direction, the interatomic distance associated with t1 increases, reducing the magnitude of |t1|. Since t1 is negative, the bandgap increases, contrary to the behavior of monolayer MoS2, where tensile strain decreases the bandgap due to positive hopping parameters t11, t22, and t12. This anisotropic strain response enables selective tuning of NIR exciton emission. Our findings provide a quantitative framework for strain engineering in phosphorene-based NIR devices, highlighting the critical role of hopping parameter signs in determining bandgap modulation.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3828-y
The rapid development of halogen-free solvent-processed organic solar cells (OSCs) has been enabled by side-chain modification on small molecular acceptors, yet the structure-property relationship between inner/outer chain lengths and device performance remains unclear. This study systematically investigates five non-fullerene acceptors (NFAs) with varied side-chain positions and architectures, clarifying the effects of inner versus outer modifications on energy level distribution, film morphology, and carrier dynamics. Notably, longer alkyl chains are not always superior; excessive solubility reduces molecular packing order. The optimized PM6:BTP-TO12 blend achieves a power conversion efficiency (PCE) of 18.2%. Furthermore, ternary OSCs incorporating BTP-TO12 as a guest material reach a remarkable PCE of 19.5%, enhancing the performance of L8-BO-based devices processed with green solvents. This improvement is attributed to the low energy loss and well-controlled aggregation behavior of BTP-TO12 in environmentally friendly toluene. These findings establish a design guideline for side-chain engineering in green-solvent-processed OSCs, achieving state-of-the-art performance and advancing scalable, eco-compatible photovoltaic technologies.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3683-y
Effective management of traumatic hemorrhage requires rapid blood loss control and facile removal of hemostatic materials to minimize secondary tissue damage. We fabricated a strongly adhesive aerogel (OPA) via Schiff-base crosslinking of oxidized hyaluronic acid (OHA) and ε-polylysine (ε-PL), enabling rapid hemostasis in lethal arterial trauma and on-demand removal via phase transition. OPAs exhibited tunable porosity and rapid blood absorption. Surface hydroxyl, amino, and carboxyl groups promoted strong hydrogen bonding with tissues, blood cells, and plasma proteins, enhancing tissue adhesion and platelet capture/activation. In a rabbit femoral-artery-injury model, OPA4 shortened hemostatic time by ~80% and reduced blood loss to 38% of the blank group. Notably, OPAs retained only 2% of initial adhesion after hydration, allowing gentle removal. OPAs also demonstrated excellent antibacterial activity, biocompatibility, and biodegradability. The simple one-step freeze-drying process and tailorable shapes offer scalable production and versatile applications. This study provides a versatile strategy for emergency and surgical hemostasis, combining rapid control of life-threatening arterial bleeding with on-demand atraumatic removal, promising improved patient outcomes and streamlined postoperative care.
SCIENCE CHINA Materials•2025•DOI: 10.1007/s40843-025-3514-3
Rechargeable lithium batteries (LBs) capable of withstanding extreme high and low temperatures (HT/LT) are indispensable for carbon neutrality, yet commercial cells deliver only 80% of room-temperature capacity at −20 °C and 90% at 55 °C. This review systematically examines the failure mechanisms of electrolytes under HT/LT conditions, including thermally driven side reactions, LiPF6 hydrolysis generating corrosive HF, transition-metal dissolution, sluggish Li+ desolvation, and unstable solid electrolyte interphase (SEI) formation. Electrolyte additives, characterized by small dosage, low cost, and minimal energy-density penalty, are classified by their working mechanisms, functions, advantages, and disadvantages. Design principles for advanced additives are proposed, emphasizing synergistic optimization of oxidative stability at HT and ion mobility at LT. Although tailored to lithium-based systems, the strategies offer transferable insights for sodium and potassium batteries facing temperature-dependent degradation. Key empirical benchmarks from the literature include nitrile-based passivation layers, localized high-concentration electrolytes with lithium nitrate, and polymer-like glass-forming electrolytes enabling fast ion transport at low temperatures. The review consolidates 130 references, providing a rigorous framework for additive selection and interface engineering to extend operational temperature ranges.