Nano Research Energy•2026•DOI: 10.26599/NRE.2025.9120181
Solid-state lithium metal batteries (SLMBs) demand quasi-solid polymer electrolytes (QSSPEs) that simultaneously deliver high ionic conductivity, interfacial stability, and oxidative resistance. This study reports a QSSPE membrane (MP46) formulated with MG30:LiTFSI:succinonitrile at a 10:4:6 weight ratio, exhibiting a wide electrochemical window of 5.1 V. Complementary infrared spectroscopy, small-angle X-ray scattering, and electron microscopy reveal a hierarchical ionic conductive network consisting of sphere-like nanostructures embedded within microphase-segregated architectures. This morphology enhances lithium-ion transport while preserving mechanical integrity. The strong interfacial adhesion between MP46 and lithium metal enables stable lithium plating and stripping for over 800 h at 0.2 mA·cm–2, effectively mitigating dendrite formation. When paired with LiFePO4 and LiCoO2 cathodes, MP46 sustains prolonged cycling, retaining 80.1% capacity after 1400 cycles at 2 C and 92.1% after 200 cycles at 4.5 V, respectively. Pouch-type cells further demonstrate mechanical flexibility and operational safety under deformation. These results establish MP46 as a viable candidate for stable high-energy-density SLMBs, offering fundamental insights into the design of next-generation polymer electrolytes.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3617-x
Macrophages are pivotal in infection resolution and tissue repair via dynamic M1-to-M2 phenotypic polarization. Although various nano-biomaterials can modulate macrophage polarization, achieving sequential M1-to-M2 transition using a single nanoformulation remains challenging. Here, we propose a strategy employing transition metal carbide/nitride (MXene) nanosheets, internalized by macrophages, as the sole regulator to induce sequential polarization. Under a rotating magnetic field, the high electrical conductivity and magnetoelectric activity of endocytosed MXene generate electrical signals and reactive oxygen species (ROS), driving M1 polarization. Upon magnetic field removal, the inherent bioactivity of MXene facilitates repolarization to the M2 phenotype. Mechanistically, this transition involves inhibition of the NF-κB signaling pathway and activation of the JAK-STAT signaling pathway. In vivo, MXene nanosheets under on-off rotating magnetic field stimulation enabled sequential M1-to-M2 polarization, promoting bacterial clearance and tissue regeneration in infected wounds. This two-step sequential strategy targeting macrophages offers a promising therapeutic approach for infected wound healing.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202507111
This study investigated the effects of a ring-shaped pulsed electric field (PEF) (1.5 V, 4 h on-time per cycle) on nitrogen removal performance and microbial community structure of anammox granular sludge (AnGS). Two anaerobic sequencing batch reactors (R1 control, R2 with PEF) were operated under stepwise increasing nitrogen loading rates (NLR). At NLR below 1,155 mg·(L·d)−1, R2 exhibited total nitrogen removal efficiency (TRE) 7.5%–17.0% higher than R1, with biomass, specific anammox activity (SAA), and extracellular polymeric substances (EPS) increased by 5%–7%, 21%–71%, and 54%–77%, respectively. However, at NLR above 1,320 mg·(L·d)−1, the toxic effect of nitrite dominated, and PEF enhancement diminished or even reversed to inhibition. Microbial community analysis revealed that at low-to-moderate NLR, PEF increased the relative abundance of Planctomycetes and key anammox bacteria (Candidatus Brocadia and Candidatus Jettenia), along with enhanced community richness (Chao1) and diversity (Shannon/Simpson indices). At high NLR, PEF decreased microbial richness compared to R1. Principal component analysis and redundancy analysis indicated that PEF was the key factor driving community differences at low-to-moderate NLR, whereas nitrite concentration became the dominant factor at high NLR. This study provides theoretical support for enhancing the resilience and engineering application of anammox processes.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2024112101
The biological reduction of Cr(VI) to less hazardous Cr(III) is a promising strategy for remediating Cr(VI)-contaminated sites. Both biochar and riboflavin can act as electron shuttles to accelerate this bioreduction process, yet their combined effects remain poorly understood. Using Shewanella oneidensis MR-1 as a model reducing bacterium, we investigated the joint influence of biochar (average particle size 28.85 μm) and riboflavin at high (1 mmol·L−1) and low concentrations on Cr(VI) bioreduction. Individually, biochar and high-concentration riboflavin enhanced indirect electron transfer, accelerating Cr(VI) removal. However, when combined, the fast-phase reaction rate (rf0) did not significantly improve compared to single amendments. The combined action factor revealed an antagonistic inhibition between biochar and riboflavin. Mechanistically, high-concentration riboflavin saturated biochar's adsorption sites (equilibrium concentration 0.96±0.04 mmol·L−1), hindering biochar's role as an electron conduit. With a bacterial density of 3.4×10^7 cells·mL−1, the inter-bacterial distance (30.87 μm) exceeded biochar's particle size, and the per-cell riboflavin concentration (2.9×10−2 pmol·cell−1) was sufficient for riboflavin to dominate as the primary electron shuttle, while biochar's surface became coated, reducing its efficacy. These findings reveal the complex interplay between biochar and soluble organic matter in Cr(VI) bioreduction, underscoring the need to consider such antagonistic effects when designing bioremediation strategies for multi-component contaminated environments.
The Chinese Journal of Process Engineering•2026•DOI: 10.12034/j.issn.1009-606X.225188
Driven by the urgent demand for green and low-carbon technologies, the development of high-performance and cost-effective rare-earth free permanent magnets has emerged as a key research focus for sustainable energy and advanced electronic applications. Among various candidates, M-type strontium ferrites have attracted considerable attention due to their excellent thermal stability, high magnetocrystalline anisotropy, and abundant raw material availability. In this study, Sr0.41La0.36Ca0.23Fe11.8Co0.2O19 was selected as the base system, and a series of samples were synthesized via a solid-state reaction combined with high-energy ball milling. The synergistic effects of varying CeO2/La2O3 mass ratios (0:10 to 10:0) and pre-sintering temperatures (1150-1200°C) on the microstructure and magnetic properties were systematically investigated. Microstructural analyses revealed that moderate Ce substitution effectively induced controlled lattice distortion and promoted densification, which inhibited abnormal grain growth and refined the microstructure. Such structural modulation not only enhanced domain wall pinning but also improved magnetocrystalline anisotropy, leading to a remarkable increase in coercivity. Magnetic measurements confirmed that the composition with a CeO2/La2O3 mass ratio of 2:8 and pre-sintered at 1180°C achieved the most balanced magnetic performance, exhibiting enhanced coercivity, sufficient remanence, and stable saturation magnetization. This work provides new insights into the cooperative effects between rare-earth doping ratios and thermal processing parameters, clarifying how lattice defects, grain boundary characteristics, and microstructural evolution collectively govern the magnetic properties of M-type ferrites. The findings establish a practical strategy for tailoring the microstructure-property relationship in rare-earth free permanent magnets, opening an optimized processing window for scalable fabrication of environmentally friendly, high-performance ferrite materials.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025021902
Polyacrylonitrile (PAN) ultrafiltration membranes are widely used in water treatment, yet their anti-fouling performance remains a challenge. In this work, PAN was first reacted with sodium azide via click chemistry to synthesize 1,2,3,4-tetrazolium polyacrylonitrile (PAN-N). Subsequently, PAN-N was reacted with iodoacetamide (IAM), 2-iodoethanol (IH), iodoacetic acid (IA), and chlorosulfonic acid (CSA) to introduce hydrophilic groups, and anti-fouling PAN ultrafiltration membranes were fabricated via phase inversion. The membranes were characterized by Fourier transform infrared spectroscopy, 1H nuclear magnetic resonance, X-ray diffraction, scanning electron microscopy, and contact angle measurements. Results showed that the PAN-N membrane exhibited superior performance to pristine PAN, with water flux increasing from 0.9233 to 1.232 L·(m2·h·kPa)−1 and bovine serum albumin (BSA) rejection from 69.23% to 82.4%. Hydrophilic modification further enhanced performance; the PAN-N-IA membrane achieved the highest water flux of 1.7347 L·(m2·h·kPa)−1 and rejection of 93.57%. Anti-fouling tests revealed that modified membranes followed the order: PAN-N-CSA > PAN-N-IA > PAN-N-IH > PAN-N-IAM > PAN-N > PAN. PAN-N-CSA and PAN-N-IA showed comparable anti-fouling performance, with total fouling indices of 56.1% and 58.47%, reversible fouling indices of 47.17% and 46.97%, and irreversible fouling indices of 8.97% and 11.47%, respectively. This work demonstrates that PAN-N-IA membranes combine high flux, high rejection, and excellent anti-fouling properties, making them promising for water treatment applications.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025031001
The diffusive gradients in thin-films (DGT) technique has emerged as a promising tool for assessing the desorption kinetics and bioavailability of organic contaminants in soil. This study compared DGT, soil solution, and organic solvent extraction methods for evaluating the bioavailability of four sulfonamide antibiotics (SAs) in soil using pot experiments with Brassica rapa subsp. chinensis and Lactuca sativa. Results demonstrated that plant uptake of SAs depended on compound properties and plant species, with roots as the primary accumulation site. DGT-measured concentrations (CDGT) showed significant linear correlations with SA concentrations in both roots and leaves, and effective concentrations (CE) were positively correlated with plant tissue levels (P < 0.05). The soil solution method also showed predictive ability but with lower stability. The mass of SAs adsorbed by DGT increased non-linearly with deployment time, indicating that solid-phase resupply sustained long-term DGT uptake. DIFS model-derived soil-water partition coefficients (Kdl) ranged from 0.23 to 1.25 mL·g−1, with higher Kdl values corresponding to greater bioavailability. Response times (Tc) ranged from 2307 to 7523 seconds, with sulfamethoxazole (SMZ) exhibiting the highest Tc, indicating its release was most constrained. Meta-analysis of desorption parameters for other organic contaminants revealed that soil pH and particle size were key determinants of Kdl, while molecular volume and hydrophobicity influenced resupply rates. This study confirms the reliability of DGT for assessing antibiotic bioavailability in soil and provides fundamental data on their migration and fate.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025022801
Paddy soils are a major source of agricultural methane (CH4) emissions. Biochar is widely applied to paddy soils, while dissolved organic matter (DOM) is ubiquitous; both can regulate CH4 emissions by mediating electron transfer processes, yet their synergistic mechanisms remain unclear. This study investigated the individual and combined effects of biochar and the DOM model compound anthraquinone-2,6-disulfonic acid (AQDS) on CH4 emissions from paddy soil during incubation. Biochar amendment increased DOM concentration and accelerated extracellular electron transfer, resulting in a maximum cumulative CH4 emission of (66.23±16.20) μmol, four-fold higher than the control (15.14±0.18) μmol. In contrast, AQDS addition markedly suppressed CH4 accumulation to (1.04±0.09) μmol, attributed to sulfate introduction as a competitive electron acceptor, despite enhanced electron exchange. The combined biochar-AQDS treatment yielded intermediate CH4 accumulation of (12.71±0.32) μmol. Although DOM availability increased, sulfate-driven electron competition inhibited methanogens, and the combined treatment favored the acetoclastic methanogenesis pathway, which produces less CH4 per unit acetate, resulting in lower emissions than biochar alone but higher than AQDS alone, indicating an additive effect. These findings elucidate the mechanisms by which biochar and DOM jointly regulate CH4 emissions from paddy soils, providing a theoretical basis for agricultural management.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202502081
Coal dust from open-pit mining severely impacts the mining area and surrounding environment, exhibiting significant dynamic changes. However, quantitative assessments of the pollution extent and multi-timescale evolution remain insufficient. Based on the Google Earth Engine platform and Landsat TM/ETM+/OLI/OLI-2 and Sentinel-2 MSI imagery from 2001 to 2024, we retrieved the enhanced coal dust index (ECDI) and coal dust pollution levels. Combined with the mine lifecycle stages, we revealed the temporal and spatial variations of coal dust in the Baorixile mining area. Annual and monthly remote sensing retrievals were stacked to construct multi-year and intra-annual dust impact frequency (DIF) indicators, precisely quantifying the spatial extent and frequency of coal dust pollution. Results show that from 2001 to 2024, the interannual coal dust pollution experienced three stages: fluctuating increase, significant decrease, and stabilization. The average pollution degree peaked at 0.41 in 2010 and remained between 0.18 and 0.22 from 2016 to 2024. The spatial pattern improved, converging from widespread diffusion to the open-pit and bare coal accumulation areas. From 2019 to 2023, intra-annual pollution increased then decreased, with summer most severe, followed by autumn, spring, and winter. Based on annual retrievals, 6 periods of multi-year DIF (2001-2024) were generated at 4-year intervals. The maximum impact range (DIF≥1) first expanded then contracted significantly; the perennial impact area (DIF=4) shifted from the southeast to the central-western open-pit, indicating a notable migration of dust disturbance gravity and effective control. Based on monthly retrievals, 6 periods of intra-annual DIF (2019-2024) were generated at 12-month intervals. The intra-annual DIF showed a gradient decreasing from the core operation area to the periphery. High-frequency zones (DIF≥9) were stably concentrated in the open-pit. The affected area fluctuated downward from 88.14 km² in 2019 to 72.84 km² in 2024. This study provides theoretical and data support for scientifically understanding and monitoring the ecological status of mining areas and formulating dust suppression measures.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025040705
Chromium is a common environmental metal pollutant. Shewanella oneidensis MR-1 can generate extracellular electrons, facilitating the reduction of Cr(VI) to Cr(III), thereby mitigating its toxicity. Both biochar and electroactive dissolved organic matter (e-DOM) regulate extracellular electron transfer during Cr(VI) bioreduction. In practice, surface DOM on biochar can detach and enter the environment, while the biochar matrix (BCM) remains the predominant form and coexists with e-DOM. However, the combined effects of BCM and e-DOM on microbial Cr(VI) removal are unclear. This study investigated the individual and combined impacts of biochar matrix and AQDS (a model e-DOM) on Cr(VI) reduction by S. oneidensis MR-1. Results showed that biochar matrix or AQDS alone promoted Cr(VI) removal, primarily by accelerating electron transfer during the fast reduction phase. However, when both were added, an antagonistic effect was observed, attributed to increased repulsive forces between the biochar matrix-AQDS complex and the bacterial cells, which inhibited electron transfer to Cr(VI). This research elucidates the electrochemical interactions between biochar matrix and e-DOM, providing a theoretical basis for biochar applications in environmental remediation and risk assessment.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3825-x
Polymer-based dielectric materials with high energy density and thermal stability are critical for modern electric/electronic industries. Polyimide (PI) based materials are promising due to their high temperature resistance and chemical inertness, yet their inherently low dielectric constant and limited charge-discharge energy density restrict applications in film capacitors. While incorporating ferroelectric or conductive fillers can enhance dielectric performance, batch-to-batch inconsistency and physical deterioration remain problematic. This study focuses on molecular structure design and modulation, preparing hyperbranched polyimides with different dianhydride monomers and branching degrees. The effects of chain packing density with polar groups on dielectric and energy storage performances were systematically investigated via experimentation and molecular simulation. Results demonstrate a significant correlation between monomers' electrical distribution and packing density in polymer systems. Molecular simulation further elucidated the underlying mechanism. This work establishes a foundation for designing polymer-based dielectric materials with high dielectric and energy storage performances at the molecular level.