SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4281-7
Multispectral camouflage materials must simultaneously address visible and infrared (IR) detection while maintaining environmental stability and mechanical flexibility for deployment in harsh conditions. This work presents a multilayer composite integrating a colorful, IR-transparent visible reflection (VR) layer, a low-emissivity graphene (LEG) layer, and an aramid nanofiber (ANF) aerogel layer. The VR layer provides tunable visible colors without compromising the low-emissivity property of the LEG layer, which achieves IR emissivity between 0.30 and 0.43. The ANF aerogel, reinforced with a grid structure, reduces thermal conduction, lowering IR radiation intensity by 40% at an 80 °C heat source. The composite exhibits effective electromagnetic interference (EMI) shielding and maintains multifunctional stability in strong acid, strong alkali, saline, and organic media. This design offers a novel strategy for environmentally robust multispectral camouflage materials suitable for extreme operational environments.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3596-2
High-entropy alloys (HEAs) have shown great promise in the CO2 reduction reaction (CO2RR) due to their tunable composition and unique physical and chemical properties. However, the role of HEAs in CO2RR and the underlying reaction mechanism remain underexplored, particularly through in situ techniques. In this work, we investigate the mechanism of CO2 reduction on AuAgCuPdPt HEAs using in situ Raman spectroscopy and attenuated total reflectance Fourier-transform infrared (ATR-FTIR) spectroscopy to reveal key intermediates and reaction pathways. Our results demonstrate that within the potential window of −0.2 to −0.7 V vs. reversible hydrogen electrode (RHE), the AuAgCuPdPt HEAs efficiently reduce CO2 to CO, achieving a Faradaic efficiency (FE) for CO greater than 90%, with a peak FE of 96.5% at −0.3 V vs. RHE. The CO2− intermediate was observed at low potentials, revealing the reaction pathway in the CO2 reduction process. Additionally, in situ ATR-FTIR results suggest that the introduction of an appropriate amount of Pt metal not only promotes water dissociation to generate protonic hydrogen, but also facilitates the desorption of *CO intermediates. The kinetic isotope effect of hydrogen-deuterium (H-D) confirms that water dissociation acts as a key proton donor in CO2RR. Furthermore, the catalyst of AuAgCuPdPt HEAs was applied as cathodes in a Zn-CO2 battery, achieving 90.23% FE for CO and a power density of 3.474 mW cm−2. This study provides new insights into the mechanistic understanding of CO2 reduction and underscores the importance of in situ spectroscopic techniques for advancing the design of efficient electrocatalysts for CO2 conversion.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3623-y
Organic light-emitting diodes (OLEDs) are an advanced technology for full-color displays, yet the low efficiency of blue OLEDs remains a critical bottleneck. Here, we report a new strategy to design robust Pt(II) emitters with enhanced molecular rigidity and increased locally excited character. The resulting Pt(II) emitter exhibits an extremely narrow emission spectrum peaking at 458.6 nm with a full-width at half-maximum (FWHM) of 16.0 nm and a small Huang-Rhys factor of 0.278, together with a high photoluminescence quantum efficiency of 95%. When doped into an OLED, the device emits at 464 nm with high color purity (FWHM = 19 nm) and achieves high external quantum efficiencies (EQEs) of 32.6%, 29.4%, and 26.9% at luminances of 123, 1000, and 5000 cd/m2, respectively. Notably, the device attains a record-high maximum brightness of 84,895 cd/m2 among reported deep-blue OLEDs with Commission Internationale de l'Éclairage (CIE) y-coordinate < 0.15. This work demonstrates one of the highest-performing deep-blue OLEDs reported to date, addressing the dual challenges of efficiency and brightness in this spectral region.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202604026
Polycyclic aromatic hydrocarbons (PAHs) are persistent organic pollutants ubiquitously present in soils, posing severe risks to ecosystems and human health. This study synthesized MIL-88A(Fe) via a hydrothermal solvent method and applied it to the photocatalytic degradation of phenanthrene-pyrene (PHE-PYR) composite contaminants in soil, investigating the adsorption-photocatalytic synergy. Results demonstrated that adsorption of PHE-PYR onto MIL-88A(Fe) was dominated by physical and monolayer surface adsorption, with a maximum adsorption capacity of 97.25 mg/kg. This strong adsorption increased pollutant concentration near active sites, accelerating photocatalytic degradation. Under optimal conditions—3% catalyst dosage, 40% soil water content, 60 min visible light irradiation, initial pollutant concentration of 200 mg/kg, and acidic soil—the total degradation efficiency reached 79.20%. Photoelectrochemical characterization revealed significant visible-light response (200–600 nm), a narrow bandgap of 3.04 eV, and favorable band structure facilitating efficient electron-hole separation. Quenching experiments identified superoxide radicals (·O2−) and holes (h+) as primary reactive species. GC-MS analysis of intermediates indicated that PYR undergoes hydroxylation, oxidation, and ring-opening to form PHE, which is further hydroxylated and oxidized, ultimately mineralizing to CO2 and H2O. This work provides an efficient strategy for remediating PAH-contaminated soils.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202508052
To improve the performance of pre-dust collectors in biomass boiler flue gas purification systems, a novel channel-steel baffle-type pre-dust collector was proposed to address the low collection efficiency of conventional designs. A gas-solid two-phase flow model was developed within the MP-PIC (multiphase particle-in-cell) framework and validated against physical experiments. The model simulated gas-particle motion inside the collector, systematically investigating the effects of structural modifications, flue gas conditions, and dust properties on collection efficiency and pressure drop. Results indicate that adding a flow baffle in the ash hopper and adopting an upper-inlet flue duct enhance collection efficiency with negligible impact on pressure drop. Flue gas velocity significantly influences performance: increasing velocity reduces efficiency while raising pressure drop; an optimal design velocity of 1.0–2.0 m·s−1 is recommended. Elevated flue gas temperature slightly decreases both efficiency and pressure drop, with minimal impact over a range of tens of degrees Celsius. Higher dust density and larger particle size improve collection efficiency and reduce pressure drop, whereas higher dust concentration increases both efficiency and pressure drop. The study elucidates the mechanisms by which structural and operational parameters affect pre-dust collector performance, providing theoretical guidance for designing low-resistance, high-efficiency collectors for biomass boilers.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025102002
The ultraviolet/chlorine (UV/Cl2) advanced oxidation process generates multiple radical species, enabling synergistic disinfection. However, the systematic influence of UV intensity on process performance remains inadequately characterized. This study investigated UV intensities from 0.25 to 2.0 mW·cm−2, assessing chlorine photolysis kinetics, bacterial inactivation, and disinfection by-product (DBP) formation. Results demonstrate that inactivation efficiency is not solely governed by total UV energy but is co-regulated by reaction kinetics and mass transfer. Increasing UV intensity accelerated chlorine photolysis by 33.7%–277.8%, elevating steady-state concentrations of hydroxyl radicals and chlorine radicals by factors of 1.6–3.8 and 1.3–3.2, respectively, thereby enhancing initial inactivation rates. However, higher intensities reduced cumulative chlorine exposure (CT value) to 14.3%–55.7% of baseline, causing overall inactivation to first increase then decrease. At a fixed UV dose of 150 mJ·cm−2, an intensity of 1.0 mW·cm−2 achieved optimal 6.5-log inactivation of Escherichia coli and the lowest bacterial reactivation rate (0.07%). Common water constituents (HCO3−, Cl−, natural organic matter) inhibited disinfection, with natural organic matter exerting the strongest suppression (2.7-log reduction). Notably, 1.0 mW·cm−2 exhibited the greatest resistance to interference. Elevated intensity reduced total organic halogen formation from 33.7 μg·L−1 to 19.0 μg·L−1. Balancing disinfection efficacy and DBP risk, 1.0 mW·cm−2 is identified as the optimal UV intensity for the UV/Cl2 process in sand-filtered water treatment.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202509039
Under the dual-carbon strategic goal, China's wind power installed capacity continues to grow rapidly, making the low-carbon recycling of decommissioned wind turbine blades increasingly prominent. This study systematically reviews material recovery pathways, policy support systems, and life-cycle carbon benefits of decommissioned blades. It first analyzes regional distribution and unit characteristics of wind power installations, identifying differentiated challenges in dismantling, transportation, and reuse across regions. Subsequently, it compares mechanical/physical, pyrolysis, chemical, and combined recycling technologies. Results show that mechanical/physical methods are low-cost but yield fiber retention rates of only 10%–78%; pyrolysis has reached industrial scale but exhibits high carbon emission intensity; chemical methods achieve higher fiber retention (55%–96%) with potential carbon reduction advantages; combined methods overcome single-technology limitations, achieving fiber retention exceeding 95%, demonstrating potential for high-value utilization and low-carbonization. At the policy level, China has proposed a two-stage target: initially establishing a blade recycling responsibility mechanism by 2025 and forming industrial clusters by 2030, with gradual improvements in standards and incentives. Life-cycle assessment indicates that wind power has slightly higher global warming potential (GWP) than photovoltaics, but its emissions are mainly concentrated in component manufacturing; if efficient recycling is achieved, wind power could surpass photovoltaics in full life-cycle carbon benefits. In summary, promoting efficient recycling and policy coordination for decommissioned wind turbine blades can achieve dual benefits of resource recycling and carbon reduction, providing strong support for reconstructing a sustainable renewable energy development paradigm.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202606014
Microplastics, as emerging environmental pollutants, can adsorb psychotropic drugs in aquatic environments, facilitating their migration and transformation, ultimately posing ecological risks. This study investigated the adsorption behavior and mechanisms of four common microplastics—polyethylene (PE), polypropylene (PP), polystyrene (PS), and polyvinyl chloride (PVC)—each with a particle size of 50 μm, toward three psychoactive drugs: diazepam, fluoxetine, and mianserin. Adsorption kinetics, isotherms, and the effects of pH and salinity were examined. Kinetic data fitted well to a pseudo-second-order model, indicating chemisorption as the rate-limiting step. Isotherm analysis using Langmuir and Freundlich models revealed that PE exhibited the highest affinity for fluoxetine, PP for mianserin, and PVC for diazepam, while PS showed linear adsorption for fluoxetine, suggesting partitioning. The adsorption of diazepam was maximal at pH 6.5–8.5, typical of natural surface waters, and increased with NaCl concentration, indicating that non-electrostatic interactions dominate and that higher ionic strength enhances adsorption. Mechanistic insights suggest that hydrophobic interactions, hydrogen bonding, π-π interactions (for PS), and halogen bonding (for fluoxetine) contribute to adsorption. These findings highlight the potential of microplastics to act as vectors for psychoactive drugs, necessitating further research on their environmental fate and ecological implications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3904-6
Disrupting calcium ions (Ca2+) homeostasis to induce calcium overloading has emerged as a promising strategy for cancer therapy. However, calcium overloading based on exogenous calcium salts (such as calcium carbonate and calcium peroxide) can easily lead to off-target Ca2+ release, causing severe side effects such as hypercalcemia and cardiac or renal dysfunction. This review explores the calcium-free nanomaterials for mediating targeted calcium dysregulation in tumors. These nanomaterials function not by carrying Ca2+ but by precisely regulating endogenous calcium signaling pathways. They promote massive Ca2+ influx through targeted activation of calcium channels and/or inhibit Ca2+ efflux by suppressing pumps, effectively triggering intracellular calcium accumulation. Such a strategy efficiently induces mitochondrial dysfunction, endoplasmic reticulum stress, and immunogenic cell death, thereby inhibiting tumor growth and metastasis while potentiating antitumor immunity. We systematically summarize the design principles, mechanisms of action, and therapeutic applications of these calcium-free nanoplatforms, highlighting their potential to overcome the limitations of traditional therapies and boost ion-interference-based cancer treatment.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4162-0
The urea oxidation reaction (UOR) offers a low-energy pathway for hydrogen production via water electrolysis, but Ni-based catalysts suffer from Ni self-oxidation reaction (NSOR) that wastes energy and poisons active sites via strong CO2 adsorption. Here, we design MoN/Ni heterostructures to optimize the electronic structure of Ni sites, suppressing NSOR. X-ray photoelectron spectroscopy and X-ray absorption spectroscopy confirm the formation of electron-rich Mo and electron-deficient Ni active pairs. In-situ spectroscopy, electrochemical tests, and density functional theory calculations reveal that electron-rich Mo sites enhance urea adsorption, while electron-deficient Ni sites prevent NSOR, facilitating urea activation, intermediate conversion, and CO2 desorption. The synergistic effect yields a current density of 100 mA cm−2 at only 1.39 V vs. RHE in 1 M KOH + 0.33 M urea, outperforming many NiOOH-based catalysts. This work introduces a novel high-performance catalyst with electron-rich/electron-deficient active pairs for efficient UOR.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4096-7
Hexagonal boron nitride (h-BN) nanomaterials exhibit exceptional properties but suffer from severe aggregation due to undesirable surface characteristics, limiting their application in polymer nanocomposites. Existing covalent functionalization methods often compromise between time efficiency, energy consumption, and structural integrity. This study presents a rapid, room-temperature catalytic grafting strategy using tris(pentafluorophenyl)borane (B(C6F5)3) to functionalize h-BN nanoflakes bearing edge hydroxyl groups. The reaction between B–OH groups and activated Si–H bonds of hydrosilanes proceeds under mild conditions, preserving the structural integrity of h-BN. Density functional theory (DFT) calculations confirm the catalytic feasibility and elucidate two possible reaction pathways: backside-attack and flank-attack mechanisms. The modified h-BN exhibits significantly improved dispersibility in low-polarity solvents and tunable surface properties. This efficient method offers a versatile platform for h-BN surface engineering, facilitating broader practical applications.