SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3694-3
Lithium metal anodes (LMAs) are among the most promising candidates for next-generation batteries with high energy density. However, their practical application is hindered by persistent challenges such as dendritic lithium growth, unstable solid electrolyte interphases (SEI), and poor Coulombic efficiency. Surface coating has emerged as a viable solution to address these limitations. In particular, atomic and molecular layer deposition (ALD/MLD) techniques offer unparalleled control over the fabrication of ultrathin, conformal coatings, making them especially suitable for stabilizing LMA interfaces. This review comprehensively summarizes recent progress in applying ALD and MLD methodologies to construct durable artificial interphases on LMAs. We discuss the underlying mechanisms through which these coatings inhibit dendrite formation, improve interfacial integrity, and facilitate uniform lithium-ion transport. The roles of inorganic ALD coatings, organic MLD coatings, and their organic–inorganic hybrids are systematically examined, with a focus on their chemical composition, deposition behavior, and electrochemical characteristics. Moreover, we highlight the enhanced performance achieved through the integration of ALD/MLD-engineered interfaces in full-cell systems. The review concludes with a discussion of current challenges and potential research avenues aimed at advancing the rational development of effective LMA protection strategies. Overall, this work offers valuable insights into the role of interfacial engineering via ALD and MLD in enabling the practical deployment of lithium metal batteries.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3706-3
Aprotic lithium-oxygen (Li-O2) batteries are severely limited by slow cathode reaction kinetics and large polarization. Herein, we design and prepare a Mott-Schottky catalyst by uniformly embedding ultrafine Ru nanoparticles on nitrogen-doped carbon (Ru@NC) nanoflakes to accelerate oxygen redox kinetics of Li-O2 batteries. The Mott-Schottky effect of Ru@NC drives spontaneous electron rearrangement in the NC matrix and induces a strong built-in electric field at heterointerfaces, which accelerates the activation and conversion of oxygen intermediates. The obtained Ru@NC possesses rich Mott-Schottky heterointerfaces and defective carbon structures, which provide extensive adsorption and nucleation sites. More importantly, Ru@NC manifests moderate affinity for the intermediate LiO2, inducing formation of unique nanosheet-like Li2O2 with low Li2O2/cathode interfacial impedance, which further enhances oxidation kinetics. These enable the Li-O2 battery with Ru@NC to deliver a remarkably reduced polarization of 0.89 V, superior rate performance, and prolonged lifespan of over 200 cycles. This work will provide valuable guidelines for engineering advanced electrocatalysts for high-performance Li-O2 batteries and beyond.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3545-7
Magnetically driven hydrogel robots show promise in biomedical and underwater applications due to remote controllability, flexibility, biocompatibility, and chemical stability. However, limited functional integration restricts their adaptability. Here, a universal modular assembly strategy is introduced using a self-healing κ-carrageenan/polyacrylamide hydrogel embedded with magnetic particles, enabling free assembly of magnetic actuation modules. These modules construct soft robots with complex geometries and magnetization distributions, allowing diverse deformations under magnetic fields. The strategy further integrates photocatalysis by embedding Ru-Bi2CrO6 photocatalysts into functional modules, yielding an oxygen-generating robot. This robot exhibits flexible underwater movement via magnetically controlled oscillatory actuation, minimizing water agitation while supplying stable oxygen to specific aquatic environments. The photocatalytic oxygen evolution rate reaches 389.1 μmol g−1 h−1. The hydrogel skeleton suppresses particle aggregation and sedimentation, and facilitates magnetic recovery. This scalable and adaptable approach advances multifunctional soft robot design.
New Carbon Materials•2026•DOI: 10.1016/S1872-5805(26)61113-4
Porous pyrolytic carbon (PPyC) serves as the buffer layer in TRi-structural ISOtropic (TRISO) fuel particles, providing storage for fission gases, preventing damage to outer layers, and absorbing stresses caused by fuel-kernel swelling. However, the changes of PPyC micro- and meso-structure at high temperatures remain insufficiently understood. In this study, PPyC fabricated by chemical vapor deposition was heat-treated from 1200 to 1600 °C and characterized across atomic-to-mesoscopic scales. Results show that the structure changes with temperature with a transition at approximately 1400 °C. Below 1400 °C, a decrease in Raman ID/IG ratio, narrowing of the graphite diffraction peak, and increased sp2 hybridization indicate progressive ordering associated with defect redistribution. Concurrent decreases in true density and mesopore volume, together with increased closed porosity, are consistent with partial conversion of open pores into closed pores. Above 1400 °C, increased ID/IG ratio, broadening of the diffraction peak near the rhombohedral graphite (101) reflection, and transition regions between crystalline and amorphous material observed by TEM indicate increasing structural disorder. Meanwhile, initially distinct PPyC particle boundaries blur and merge into broad, plate-like domains. Subsequent decrease in closed porosity and increase in mesopore surface area are consistent with partial connection of closed pores to the open-pore network. This work shows that intrinsic coupling between atomic-scale structural change and mesoscale pore connectivity provides a basis for assessing high-temperature structural stability of PPyC in TRISO fuel particles.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.3724/2097-213X.2025.JFCT.0032
This study elucidates the nonlinear relationship between the softening point of coating asphalt and its oxidative cross-linking behavior, as well as the sodium storage performance of the derived hard carbon. Comparative analysis of asphalts with low (80 °C), medium (160 °C), and high (260 °C) softening points revealed that both the 80 and 260 °C asphalts incorporated a higher oxygen content (20%–25%) during oxidation, leading to the formation of a deeply cross-linked structure dominated by anhydride and ester groups. This effectively suppressed graphitization during carbonization, yielding hard carbon with large interlayer spacing, high disorder, and abundant closed pores. The derived hard carbon exhibited superior sodium storage performance: the initial charge capacities of EPOC-80 and EPOC-260 reached 314.7 and 306.6 mA·h/g, with first-cycle coulombic efficiencies of 81.3% and 79.3%, respectively, along with excellent cycling stability and rate capability. In contrast, the medium softening point asphalt (160 °C) showed limited oxygen incorporation (~5%) and insufficient cross-linking after oxidation, resulting in a densely packed hard carbon with smaller interlayer spacing (3.46 Å) and restricted sodium storage sites, which led to a significantly reduced capacity of 173.2 mA·h/g. This work provides new design principles and theoretical support for optimizing hard carbon anode structures through precise control of the precursor softening point.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025020901
The intensification of environmental pollution necessitates the development of efficient and sustainable remediation technologies. Piezoelectric-coupled photoelectrocatalysis and piezoelectric-coupled electrocatalysis, which convert mechanical energy into electrical energy and integrate with photoelectrocatalytic or electrocatalytic processes, have demonstrated significant potential for environmental remediation. By combining the piezoelectric effect of piezoelectric materials with photocatalysis or electrocatalysis, these technologies markedly improve the separation efficiency of photogenerated or electrogenerated electron-hole pairs, thereby enhancing pollutant degradation. This review explores the working principles of piezoelectric-coupled photoelectrocatalysis and electrocatalysis, highlighting their latest advancements in environmental remediation, including the degradation of organic pollutants and value-added conversions. It also addresses the challenges currently faced in applying these technologies, such as limitations in light transmittance, restricted light absorption ranges, rapid carrier recombination, and the short lifespan of electrodes in electrochemical systems. Finally, potential future research directions are discussed, emphasizing the need for improved material stability, scalable synthesis methods, and a deeper mechanistic understanding to bridge the gap between laboratory research and practical applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3879-5
Stimuli-responsive circularly polarized luminescence (CPL) materials are pivotal for investigating excited-state chirality and advancing optoelectronic applications. However, achieving comprehensive modulation of chiroptical properties within a single system under a single external stimulus remains a significant challenge. Here, electric-field-responsive helical ferroelectric liquid crystals are developed by incorporating diverse chiral emitter dopants into the prototypical liquid crystal mesogen 2,3′,4′,5′-tetrafluoro-[1,1′-biphenyl]-4-yl 2,6-difluoro-4-(5-propyl-1,3-dioxan-2-yl)benzoate (DIO), known for its high dielectric anisotropy and multiple mesophases. By co-doping different types of chiral molecules with opposite handedness, a competitive chiral field is generated that responds differentially to the applied voltage, enabling continuous modulation of the helical pitch and reversible inversion of handedness. This work provides the integrated demonstration of single-stimulus regulation of on/off gating, magnitude tuning, and reversible sign inversion in a single liquid-crystal system, opening a pathway toward intelligent chiroptical materials.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202509051
Recyclables constitute a significant fraction of municipal solid waste (MSW) and hold substantial potential for resource utilization and greenhouse gas (GHG) emission reduction, contributing to carbon peak and carbon neutrality goals. However, reported GHG emission factors (EFs) for various recyclables vary widely across databases and literature, ranging from -19,110 to -125 kgCO2-eq·t⁻¹, with significant differences both among categories and within the same category, complicating accurate accounting. This study systematically integrates literature data on EFs for different recyclable categories, focusing on identifying factors causing intra-category variability. Data were collected from global databases (ecoinvent, WARM, CPCD, NAEI) and peer-reviewed studies over the past two decades, normalized to a functional unit of 1 tonne of recyclable. Statistical analysis (mean ± standard deviation) provided reference ranges for each category. Results show paper recyclables EFs range from -3,140 to 270 kgCO2-eq·t⁻¹, with corrugated cardboard and writing paper exhibiting higher absolute values than packaging paper due to structural strength and resource value. Plastic recyclables EFs range from -3,096 to -566 kgCO2-eq·t⁻¹, with EPS showing the highest reduction potential, followed by PET and PVC, then HDPE, LDPE, PP, and other plastics. Key influencing factors include functional unit definition, accounting scenario, system boundary, electricity emission factor selection, and calculation assumptions. The study recommends selecting EFs matching the specific accounting scenario and performing error analysis. Data gaps remain for LDPE, EPS, and other plastics, necessitating further experimental or field data. To enhance accuracy, calibration methods such as process-level and life-cycle inventory data calibration are proposed. This work provides a scientific basis for EF selection and calibration in GHG accounting of recyclables.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025021602
Iron-based catalysts are widely used in water pollution treatment due to their high stability and redox capabilities. However, conventional single-component iron-based catalytic systems face challenges such as slow reaction kinetics and low efficiency in generating reactive oxygen species (ROS) during organic pollutant degradation. In this study, three electroactive bacteria (Bacillus megaterium, Lactococcus lactis, and Shewanella putrefaciens) were selected to interact with nano-Fe3O4 to construct bacterial/Fe3O4 hybrid materials, accelerating the degradation of gallic acid. The results showed that bacterial interaction with Fe3O4 facilitated rapid electron transfer, enhancing gallic acid degradation. The bacterial/Fe3O4 hybrid materials exhibited significantly higher gallic acid degradation rates compared to Fe3O4 alone. This improvement was mainly attributed to the ability of electroactive bacteria to promote the formation of oxygen vacancies (OVs) on the Fe3O4 surface, accelerating electron transfer and subsequently enhancing the generation of ROS, including hydroxyl radicals, superoxide radicals, and singlet oxygen. Correlation analysis demonstrated a significant positive relationship between OVs and ROS generation, with hydroxyl radicals showing the highest correlation with the gallic acid degradation rate constant (r = 0.98), indicating its dominant role in gallic acid degradation; the hydroxyl radicals quenching experiment also verified its dominant role. Additionally, due to the temperature sensitivity of bacteria, the degradation rate of gallic acid reached its peak in the temperature range of 30–40 °C. This study reveals the mechanism by which electroactive bacteria enhance the catalytic activity of Fe3O4, providing a new strategy for its application in advanced oxidation technology for water pollution treatment.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3787-x
Circumventing the tumor's defensive antioxidant system and achieving precision cancer therapy remain major challenges in high-efficacy tumor treatments. Here, we propose a synergistic strategy integrating non-oxidative physical ablation and oxidative chemical intervention. An acid-responsive self-collapsing nanomineral PCSB is constructed, comprising poly(acrylic acid)-modified calcium sulfite (CaSO3) and a pH-responsive photoacoustic (PA) therapeutic molecule, aza-BDP. In the tumor acidic microenvironment, PCSB decomposes, releasing PA agents and SO2/Ca2+, thereby enabling combined non-oxidative mechanical damage from PA therapy and oxidative chemical damage from SO2 gas and Ca2+ ions. This dual-action approach effectively reduces resistance conferred by tumor antioxidant mechanisms and improves treatment precision. The study presents a synergistic physical-chemical strategy with significant potential for solid tumor elimination.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202608006
Organic waste is a potential phosphorus reservoir, and understanding the dynamics of available phosphorus (AP) during its resource utilization is critical for efficient phosphorus recovery. Composting, a key route for organic waste valorization, involves complex transformations of phosphorus alongside organic matter degradation and humification. However, the long duration and high cost of composting experiments, coupled with multifactorial influences, hinder efficient elucidation of AP dynamics via conventional methods. This study compiled data from 33 publications, constructing a dataset of 647 samples. Data preprocessing included iterative imputation, one-hot encoding, and standardization. A stacking ensemble learning model was developed to predict AP generation during composting. The optimal ensemble comprised XGBoost and SVR as base learners and ElasticNet as the meta-learner, achieving R² values of 0.954 and 0.928 on training and test sets, respectively, with low overall error. SHAP analysis revealed that key factors influencing AP content, in descending order of importance, were feedstock type, bulking agent type, turning interval, pH, electrical conductivity (EC), and C/N ratio. Notably, livestock manure as feedstock and straw-based bulking agents contributed positively to AP predictions. Partial dependence plots indicated that lower pH and C/N ratios generally favored AP accumulation throughout composting. During the initial stage, higher moisture content and lower EC enhanced AP; in the thermophilic phase, higher temperatures corresponded to higher AP; and during cooling and maturation, maintaining moisture below 48% and C/N below 14, while extending composting beyond 43 days, promoted AP accumulation. This study demonstrates accurate AP prediction via stacking ensemble learning and identifies critical factors, offering support for optimizing phosphorus management in composting engineering.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202608020
This paper systematically reviews the progress and achievements of China's collaborative innovation pilots for pollution and carbon emission reduction, identifies existing problems, and proposes targeted recommendations. As of the first batch, 64 pilot units (21 cities and 43 industrial parks) have issued implementation plans, with overall smooth progress and notable phased outcomes. Most pilots have actively promoted institutional and mechanism innovations, achieving substantial advancements in key sectors and critical areas, and yielding replicable practices. However, challenges persist, including fragmented interdepartmental collaboration, insufficient alignment of management systems, funding shortages for synergistic projects, and inadequate technological support. Recommendations include intensifying awareness campaigns, establishing coordinated promotion mechanisms, accelerating management system implementation, advancing core technology R&D, conducting progress evaluations, and amplifying publicity. For the second batch, suggestions focus on expansion strategies, pilot types, and selection methods, emphasizing incremental tasks, diverse pilot subjects (from provincial to enterprise levels), and clear articulation of expected outcomes and demonstration targets. The paper underscores the need to transform local experiences into institutionalized frameworks, fostering a four-dimensional synergy of carbon reduction, pollution control, green expansion, and economic growth, thereby contributing to China's ecological civilization and global climate governance.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4007-x
Hydrogels, with their hydrophilicity, flexibility, and environmental friendliness, are highly desirable for moisture-electric generators (MEGs) that harness ubiquitous moisture to generate electrical energy. As the active material layer in MEGs, hydrogels play a crucial role in absorbing atmospheric moisture and converting chemical potential energy into electricity. However, the relatively low output current of the device and the instability of hydrogels pose challenges to the development of high-performance hydrogel-based MEGs. Herein, we introduce a straightforward, feasible, cost-effective, and versatile two-step solvent displacement strategy to overcome the barrier associated with the development of MEGs. Through tunable solvent interactions of glycerol and water, the moisture absorption capability and stability of the hydrogel can be improved, while promoting favorable ion migration. Such an effective processing route not only significantly boosts the output performances but also greatly improves the long-term durability of hydrogel-based MEGs. Notably, the current output and power density of the treated MEGs can increase by up to two orders of magnitude. The mechanisms behind the intriguing observation are investigated by various characterizations and theoretical calculations. This universal strategy holds promise to be extended to various hydrogel-based MEGs. Moreover, the MEGs can be used for energy harvesting, self-powered respiratory monitoring, and non-contact humidity detection. This work offers new opportunities for advancing green energy and self-powered technologies.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4074-6
Achieving carbon neutralization relies heavily on green hydrogen and electrochemical carbon-nitrogen cycles. However, the complexity of these systems and the cost of traditional Edisonian trial-and-error methods hinder rapid progress. Artificial intelligence (AI) has emerged as a transformative tool, enabling high-throughput data processing and dynamic adaptation. This review surveys the landscape of AI-driven electrochemistry, bridging the gap from atomic-scale design to industrial-scale implementation. Specifically, we focus on three areas: atomic structure-function decoding, fully automated “self-driving” laboratories, and macro-scale simulations for device durability. Furthermore, we elucidate the critical challenges in integrating AI with materials science. By mapping current trends and future directions, this work aims to unlock the full transformative potential of AI in next-generation energy storage and conversion.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4132-y
Manganese-iron-based mixed polyanionic cathodes are promising for sodium-ion batteries (SIBs) due to high energy density and operating voltage, but suffer from Jahn-Teller distortion of Mn3+ that degrades cycling stability. Here, a structural modulation strategy via Mg2+ doping is reported. Electrochemically inert Mg2+ forms stronger chemical bonds, adjusts lattice parameters, and suppresses Jahn-Teller distortion, enhancing structural stability. Mg2+ also widens sodium-ion diffusion channels, improving diffusion kinetics. Additionally, an in-situ three-dimensional carbon nanotube (CNT) conductive network boosts electronic conductivity. The resulting NFMPP-Mg@CNTs cathode delivers a discharge capacity of 126 mAh g−1 at 0.1 C (near theoretical 129 mAh g−1), retains 80% capacity after 3000 cycles at 0.5 C, and achieves an energy density of 401 Wh kg−1, among the highest reported for mixed phosphate systems. Ex-situ XPS and first-principles calculations confirm that Mg2+ resists geometric distortion by enhancing lattice stability and widening Na+ diffusion pathways (migration barrier reduced from 0.566 to 0.398 eV). This work provides a viable route for high-energy, long-life SIB cathodes suitable for large-scale energy storage.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4175-3
The precise manipulation of microdroplets (diameter < 20 μm) on solid substrates is critical for applications in environmental monitoring, targeted drug delivery, clinical diagnostics, and public health. A major challenge is contact angle hysteresis (CAH), which pins droplets and impedes mobility. Here, we introduce a crack-mediated capillary bridging strategy for efficient capture and directional transport of microdroplets. The approach employs a stretchable elastomeric substrate with island-like microstructures. Under longitudinal tensile stress, controlled fracture generates densely packed, directionally oriented surface cracks. These fissures induce localized capillary forces that counteract adhesion-induced resistance, enabling programmable droplet motion. Experiments capturing airborne pathogenic agents demonstrated a 14.2-fold enhancement in enrichment efficiency compared to flat surfaces. This work integrates fracture mechanics with capillary-driven fluid dynamics, establishing a framework for next-generation microfluidic systems. The findings offer promising avenues for biosensing, pollutant analysis, and interdisciplinary applications.