SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4320-4
Colloidal lead halide perovskite quantum dots (Pe-QDs) have achieved external quantum efficiencies exceeding 20% in red, green, and blue light-emitting diodes (LEDs), yet their integration into high-resolution displays is impeded by two persistent bottlenecks: the intrinsic ionic lability of Pe-QDs, which compromises structural and environmental stability, and the absence of mild, high-fidelity patterning techniques that avoid ligand detachment and surface defect formation. This work addresses both obstacles through a dual strategy. First, a ligand-fluoride co-stabilization method yields shape-defined, colloidally stable rhombic dodecahedral CsPbBr3 Pe-QDs; subsequent fluorine surface reconstruction using tetrabutylammonium fluoride (TBAF) enhances ligand binding affinity, producing BHOA+F CsPbBr3 Pe-QDs with a photoluminescent quantum yield (PLQY) of 94.6%. Accelerated ageing, ultraviolet irradiation, and thermal cycling tests confirm improved structural and environmental stability. Second, capillary liquid-bridge confined assembly enables reproducible, scalable fabrication of pixelated Pe-QDs with in-plane long-range order, vertical confinement, and precise spatial patterning. The resulting pixelated Pe-QDs LEDs exhibit high efficiency, sufficient brightness, and long operational stability, with the approach generalizable across red, green, and blue Pe-QDs for wide color gamut displays. This combination of surface fluorination and liquid-bridge assembly represents a landmark achievement in high-resolution display technology.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4246-5
Developing organic solar cells (OSCs) processable from green solvents without additives or post-treatments is essential for sustainable manufacturing, yet high power conversion efficiency (PCE) remains difficult due to limited morphology control. Herein, we develop a new electron-deficient building block, dithiazolo[4',5':3,4;5'',4'':5,6]benzo[1,2-d][1,2,3]triazole (DTzBT), which fuses benzo[d][1,2,3]triazole (BTA) with thiazole to leverage S/N-mediated non-covalent interactions, enhance planarity and lower the HOMO. To isolate side-chain effects, two DTzBT-based donors, namely PTzMe-F (N-methyl) and PTzEH-F (N-2-ethylhexyl), have been designed and synthesized. PTzMe-F exhibits poor solubility and miscibility with L8-BO, yielding 2.64% PCE (chloroform). PTzEH-F exhibits excellent processability and favorable morphology, delivering 17.61% PCE (chloroform) and 19.17% as-cast from toluene without any additive or post-treatments. In addition, the ternary LbL device based on PTzEH-F/L8-BO:PC71BM achieved an impressive efficiency of 20.27%. Comprehensive characterization indicates that 2-ethylhexyl side chains afford optimal solubility while preserving strong intermolecular interactions and favorable phase separation. DTzBT mitigates BTA’s HOMO-raising tendency via electron-withdrawing thiazole fusion, reconciling aggregation tunability with energy-level control. These results show that precise backbone and side-chain co-design enables green-solvent, additive-free processing for high-performance OSCs, advancing sustainable photovoltaic manufacturing.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025022501
The pretreatment of trace emerging contaminants in environmental matrices is challenging due to diverse methods and uncertain applicability. This study compared solid-phase extraction (SPE) and liquid-liquid extraction (LLE) for extracting endocrine-disrupting compounds (EDCs), particularly phthalate esters (PAEs), using laboratory-spiked blank samples. LLE achieved satisfactory recoveries for PAEs at spike levels below 4 μg·L−1, enabling detection of five PAEs including diisodecyl phthalate (DIDP), with improved efficiency via repeated extraction. SPE offered lower detection and quantification limits, higher accuracy and sensitivity, and achieved high recoveries for 12 EDCs and 10 antibiotics at spike levels ≥0.2 μg·L−1, with detection limits as low as 0.1–6.4 ng·L−1. The developed SPE coupled with liquid chromatography-Orbitrap mass spectrometry (LC-Orbitrap MS) method was applied to industrial wastewater samples. Across five industrial sectors (coatings, rubber, pharmaceuticals, inks, and materials technology), five antibiotics and ten EDCs were detected, with total concentrations ranging from 0.03–0.56 μg·L−1 and 0.07–1.91 μg·L−1, respectively. Sector-specific profiles emerged: rubber industry effluent was dominated by dibutyl phthalate (DBP) at 1.07 μg·L−1, while pharmaceutical effluent featured sulfamonomethoxine (SMM) at 0.34 μg·L−1. This systematic evaluation demonstrates that SPE-LC-Orbitrap MS is robust for complex matrices, providing a technical foundation for accurate quantification of emerging contaminants in industrial wastewater.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3873-7
The escalating demand for lightweight, multifunctional stealth materials in modern protective applications necessitates integrated solutions against electromagnetic interference (EMI), infrared (IR) detection, and incendiary threats. This study presents an innovative melamine foam (MF)-based composite featuring an asymmetric dual-nano conductive network, achieving absorption-dominated EMI shielding, IR stealth, and flame retardancy. Inspired by the Salisbury screen, the composite employs MF as an interlayer and flame-retardant thermoplastic polyurethane (TPU) nanofiber membrane as a substrate. The architecture comprises a carbon nanotubes (CNTs)-modified impedance matching nanofiber layer as the top absorber and a silver nanoparticles (AgNPs)-modified nanofiber layer as the highly conductive reflective bottom. Precise control of CNTs content and interlayer thickness enables tunable electromagnetic wave (EMW) absorption, yielding a low reflection coefficient of 0.03 and a high EMI shielding effectiveness of 79.23 dB at a total thickness of 4.40 mm. Even at 1.40 mm, effective absorption-dominated shielding is maintained. The performance remains stable under ultrasonic, compression, and bending tests, demonstrating high durability. The mechanism underlying absorption-dominated EMI shielding at reduced thickness, relying on destructive interference of EMWs enabled by the asymmetric dual-nano conductive network, is thoroughly elucidated. Additionally, the composite exhibits superior IR stealth and self-extinguishing properties. This work offers a feasible strategy for designing high-performance stealth materials with strong potential for personnel and communication equipment protection.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3901-2
This work presents a cracked template and vacuum metal evaporation strategy for fabricating structurally randomized copper (Cu) mesh films. Regulating the internal stress distribution within the coating during template cracking enables controlled fabrication of Cu mesh films with varying discrete degrees of mesh aperture area and distinct probability distributions of metal line inclination. The influence of structural parameter randomization on properties was systematically investigated, encompassing higher-order diffraction energy homogenization, optoelectronic performance, and electromagnetic interference shielding effectiveness (EMI SE). Results demonstrate that increasing structural randomization effectively suppresses higher-order diffraction energy, achieving a reduction to −3.93 dB in normalized higher-order diffraction energy. Furthermore, the Cu mesh film exhibited minimal degradation on imaging system performance, with resolution decreasing only marginally from 80.6 to 71.8 lp/mm. Simultaneously, the most randomized Cu mesh film demonstrates an ultra-low sheet resistance (3.31 Ω/sq), high visible light transmittance (88.7% at 550 nm), an exceptional figure of merit (FoM=913.69), and robust EMI SE within the X-band (average SE of 33.18 dB). These findings underscore that metal mesh films incorporating structural randomization offer an effective strategy for enhancing EMI shielding in high-performance optoelectronic imaging systems.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202608003
The transition of municipal wastewater treatment from energy-intensive aerobic processes to energy-recovering anaerobic technologies is critical for achieving carbon neutrality. However, anaerobic treatment of low-strength wastewater faces operational challenges, especially after prolonged shutdowns and under low-temperature stress. This study investigated the recovery and performance of a pilot-scale anaerobic filter (AF) packed with volcanic rock media (effective volume 240 L) treating actual municipal wastewater. After a 234-day starvation period, the AF recovered within 63 days by extending hydraulic retention time from 8 to 12 hours, achieving total chemical oxygen demand (TCOD) and soluble chemical oxygen demand (SCOD) removal amounts of 58.6 mg/L and 21.5 mg/L, respectively. Following 100 days of low-temperature operation (influent temperature dropped to 11.7 °C), TCOD and SCOD removal amounts remained at 54.6 mg/L and 28.6 mg/L, respectively. Although methane production volume decreased, the specific methane yield was not significantly affected (0.276 L CH4/g TCODre during recovery vs. 0.244 L CH4/g TCODre under low temperature). Mechanistic analysis revealed that increased protein secretion in extracellular polymeric substances (EPS) was crucial for resistance to low-temperature stress, with protein content negatively correlated with temperature. Microbial community analysis showed that functional populations recovered in the order of hydrolytic acidogens, hydrogen-producing acetogens, and methanogens. Methanobacterium dominated after starvation, while Methanosaeta became dominant after low-temperature exposure due to its high affinity for acetate. Carbon footprint accounting indicated that recovering dissolved methane and coupling with nitrate-dependent methane oxidation is the optimal strategy for carbon reduction.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4060-5
Organic solar cells (OSCs) offer unique advantages for wearable electronics due to their light weight and mechanical flexibility. However, achieving both high optoelectronic performance and mechanical robustness in organic semiconductors remains challenging, compromising the efficiency and durability of stretchable OSCs. Here, we report a cross-linked conjugated polyelectrolyte (CPE)-polyoxometalate (POM) anode interlayer (AIL), PTN-POM, constructed via strong electrostatic interactions between ammonium groups and POM. The PTN-POM film exhibits an electrical conductivity of 3.30×10−3 S/m and high stretchability, significantly outperforming the classic PEDOT:PSS AIL in mechanical strength. Binary OSCs modified with PTN-POM achieve a power conversion efficiency (PCE) of 19.59%, the highest reported for OSCs using a cross-linked AIL. Notably, PTN-POM enables fabrication of water-proof OSCs that show no performance degradation after underwater storage for 42 days. Furthermore, stretchable OSCs incorporating PTN-POM demonstrate enhanced mechanical robustness, retaining 81% of initial PCE under a large tensile strain of 50%. This work significantly enhances the photovoltaic, waterproof, and mechanical properties of OSCs, advancing their potential for wearable photovoltaics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4045-x
The release of radioactive iodine from nuclear accidents and nuclear medicine poses significant environmental and health risks. Here, we report the design and synthesis of two cross-linked macrocycle-based porous organic polymers (P1 and P2) with different functionalities for efficient and rapid capture of radioactive iodine. P1 achieves complete iodine adsorption within 5 minutes, with an exceptional adsorption rate constant (k_obs) of 18.92 g g−1 min−1 (8.24 g g−1 min−1 for P2), representing a record-high iodine removal rate among state-of-the-art porous organic polymers. P1 demonstrates superior iodine adsorption efficacy in dynamic flow-through experiments, achieving a remarkable efficiency of 96.4% for radioactive 131I removal, greatly minimizing radiation contamination. Experimental and modelling techniques reveal that the superior iodine adsorption performance originates from electron-rich functional groups, hydrophobic surface, and porous structure of P1, thus exhibiting remarkable iodine capture capabilities through charge transfer, halogen bonding, and hydrophobic effects. The adsorbents show excellent stability and performance under complex and harsh conditions (pH 2–10) and can be easily regenerated, confirming their excellent reusability and potential for practical applications.