SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4283-0
Smart windows are critical for building energy conservation, yet existing technologies cannot simultaneously satisfy the diverse requirements of light transmission, thermal insulation, and privacy protection across varying scenarios, such as daytime transparency and nighttime heat retention with opacity. Herein, we report a thermo- and electro-responsive ionogel fabricated via one-step photopolymerization, integrating the electrochromic viologen derivative (Pa-PhV)(TFSI)2 with a thermoresponsive matrix. The (Pa-PhV)(TFSI)2 delivers excellent electrochromic performance, featuring dual-band light modulation, a high coloration efficiency of 433.6 cm2 C-1, and a fast coloration time of 2.52 s. The ionogel exhibits three stable switchable states under thermal and electrical regulation, fulfilling core practical demands for full-spectrum photothermal management. Model house tests verify its excellent seasonal adaptability, with a maximum indoor temperature reduction of up to 15 °C in a simulated summer environment. Furthermore, the ionogel enables dual-encrypted data storage via UCST and voltage triggering. This work broadens the application scope of viologen derivatives and offers a competitive strategy for multifunctional smart windows and encrypted data storage.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4209-3
Solar interfacial evaporation and photocatalysis exhibit intrinsic complementarity in energy utilization pathways and reaction mechanisms. Integrating photocatalysis into interfacial evaporation systems enables a synergistic platform for efficient evaporation and pollutant removal. In this study, a defect-engineering strategy is developed for UiO-66 by covalently anchoring five carboxyl-containing organic dyes into its framework, where steric hindrance and ligand substitution synergistically induce abundant structural defects. This approach yields a series of defect-rich UiO-66 materials with tunable dye loading. Among them, the dye-sensitized UiO-66@dye-2 system demonstrates optimal light absorption capacity and vacancy defects. The dyes act as sensitizers, broadening the light absorption range and accelerating water evaporation, while the defect-inducing dyes introduce abundant trap sites, enabling rapid charge transfer and efficient spatial charge separation. Under 1-sun irradiation, the system achieves an outstanding water evaporation rate with a high solar-to-vapor conversion efficiency of 97.8%, along with excellent photocatalytic performance, achieving 95.4% degradation of phenol pollutants. Notably, it maintains stable degradation performance across highly acidic and alkaline environments, ensuring reliability for long-term operations in complex conditions. This work provides a molecular-level strategy for constructing defect-rich UiO-66 derivatives and offers insights for designing next-generation materials for integrated photothermal-photocatalytic environmental remediation.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3696-3
The development of substitutable meniscus implants that can effectively protect articular cartilage remains a great challenge. Herein, a polyurethane with chemical crosslinking and sulfobetaine extenders containing hydrophobic chains (PU-CL-hSB) is developed, which could improve comprehensive properties and long-term stability simultaneously. By regulating the mole ratio of functional groups, PU-CL-hSB with appropriate mechanical properties, excellent tribological properties, and good fatigue resistance is used to prepare substitutable meniscus implant by hot-pressing. Due to the synergistic effect of functional groups, PU-CL-hSB meniscus implant presents comparable or even superior properties to native meniscus. It withstands a maximum force of 26.08 N versus 25.14 N for native meniscus, an energy dissipation from 45.93 to 39.17 N mm compared to 28.83 to 19.11 N mm for native meniscus over 300 cycles, and a friction coefficient from 0.08 to 0.19 compared to 0.11 to 0.26 for native meniscus. This PU-CL-hSB meniscus implant is further implanted into live rabbit knee joints for 8 and 25 weeks by a new approach, and in vivo data indicate that PU-CL-hSB meniscus implant not only protects articular cartilage from severe damage without eliciting inflammatory responses, but also can maintain normal physiological activities in the native state. Our findings present a substitutable meniscus implant that could be applied in vivo and propose evaluation methodologies for meniscus implants.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2024112104
Carboxyl-modified polystyrene microplastics (PS-COOH) are negatively charged particles formed by surface oxidation and functional group modification of polystyrene microplastics (PS), widely used in biomedical and analytical chemistry. However, studies on their neurotoxic effects on aquatic organisms are scarce. This study employed zebrafish (Danio rerio) as a model organism, exposing embryos to environmentally relevant concentrations (0.1, 1, 10, 100 μg·L−1) of PS and PS-COOH. Neurotoxic effects were assessed by measuring tail coiling frequency at 24 hpf and swimming velocity under alternating light/dark cycles at 120 hpf. Results demonstrated that both PS and PS-COOH induced neurotoxicity, with PS-COOH significantly reducing tail coiling frequency and average swimming speed compared to PS (P<0.05). Exposure to 10 μg·L−1 PS-COOH disrupted neurotransmitter homeostasis, altering levels of acetylcholine (ACh), serotonin (5-HT), and γ-aminobutyric acid (GABA). Transgenic zebrafish Tg(huc:EGFP) fluorescence assays revealed that PS-COOH (0.1–100 μg·L−1) caused damage to central neurons. These findings indicate that PS-COOH exposure impairs cholinergic, serotonergic, and GABAergic neurotransmission, induces neuronal damage, and exerts neurotoxic effects on zebrafish larvae. This study provides a theoretical basis for assessing the ecological and health risks of modified microplastics.
New Carbon Materials•2026•DOI: 10.1016/S1872-5805(26)61107-9
Graphene's exceptional electrical, thermal, mechanical, and chemical properties render it promising for electronics, energy storage, protective coatings, catalysis, and environmental remediation. However, large-scale adoption is hindered by high synthesis costs, process complexities, and integration issues. Among production methods, chemical vapor deposition (CVD) on metals is the most scalable, with copper widely used due to its low carbon solubility and excellent monolayer control. Yet, Cu substrates are costly ($8–10/kg), transfer steps introduce defects, and the resulting graphene is poorly matched to structural components. Iron-based substrates offer an attractive alternative, providing much lower material cost, direct compatibility with steel infrastructure, reduced growth temperatures, and intrinsic functionalities such as magnetism and catalytic activity, enabling new applications. This review analyzes graphene growth on pure iron, iron alloys, and iron-based nanoparticles, focusing on growth mechanisms, substrate engineering, and characterization approaches tailored to challenges like carbide formation. Applications including corrosion-resistant coatings, electronics, energy storage, catalysis, water treatment, and electromagnetic shielding are considered. Despite the limitation of high carbon solubility, iron can be exploited for controlled multilayer formation useful for barrier and energy applications, while alloying and process control enable tunable monolayer or few-layer films, making iron-based CVD graphene a versatile, cost-effective platform.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202608025
To evaluate heavy metal contamination and human health risks in desert lakes, this study analyzed concentrations of seven heavy metals (Hg, Pb, Cu, Zn, Cd, Cr, As) in Hongjiannao Lake, Northern Shaanxi, from 2013 to 2024. The absolute principal component score-multiple linear regression (APCS-MLR) model quantitatively apportioned pollution sources, and a health risk assessment model evaluated non-carcinogenic and carcinogenic risks. Results showed average concentrations of the seven metals did not exceed background values, but 28.57% of sampling points exceeded background for As, with a maximum exceedance factor of 1.92. Total average concentration decreased from 112.51 μg/L (2013–2016) to 58.80 μg/L (2017–2024), attributed to the 2016 closure of small coal mines and ecological restoration around the 4A scenic area. Source apportionment identified four sources: industrial (35.44%), agricultural (24.67%), natural (23.65%), and traffic (16.23%), indicating industrial dominance. Non-carcinogenic risks were negligible, but carcinogenic risks exceeded the alert value (1×10⁻⁴), with adults at higher risk than children. Oral ingestion was the primary exposure pathway. As and Cd were key control elements, with exceedance rates of 100% and 16.67%, respectively. These findings provide a theoretical basis for health risk prevention and environmental management.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4334-9
Piezoelectric materials underpin modern electromechanical energy conversion, serving as critical components in sensors, actuators, and energy harvesters. Their performance is intrinsically governed by the piezoelectric coefficient, yet optimizing this property remains challenging due to the profound influence of diverse microscopic structures. This review systematically examines three fundamental crystalline architectures—perovskite, wurtzite, and fluorite—and critically analyzes performance optimization strategies tailored to each structure. We explore five principal modification approaches: defect engineering, elemental doping, heterostructure film fabrication, composite film design, and buffer layer incorporation, with emphasis on the underlying physical mechanisms that drive property enhancements. By providing a cross-structural comparison, this review establishes clear structure–property relationships, offering a foundational guide for material selection and design. Furthermore, we highlight the implications of these advanced materials for next-generation applications in energy harvesting and smart devices. Finally, we present a forward-looking roadmap, outlining emerging research directions and addressing key technical challenges to guide the development of next-generation high-performance piezoelectric materials.