SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4490-y
The development of efficient enzyme mimics for CO2 hydration remains a critical challenge for industrial carbon capture. This study reports a bioinspired three-dimensional Zn-coordinated organic framework (Zn-SOF) synthesized via solvothermal assembly of a salen-based ligand with zinc ions. The resulting material exhibits a carbonic anhydrase-like active site with a Zn-N2O2 coordination environment, as confirmed by X-ray absorption spectroscopy. The Zn-SOF demonstrates a CO2 hydration rate of 3.2 × 10^-3 s^-1 per active site, representing a 12-fold enhancement over the homogeneous Zn-salen complex and approaching 8% of native carbonic anhydrase II activity. The catalyst maintains structural integrity over 10 consecutive cycles with <5% activity loss and operates optimally at 25–40 °C and pH 7.4–9.0. Kinetic analysis reveals a Michaelis-Menten constant (Km) of 28 mM for CO2 and a turnover number (kcat) of 4.1 s^-1, outperforming benchmark Zn-based mimics. The framework's hierarchical porosity (BET surface area: 620 m2 g^-1) facilitates substrate diffusion, while the hydrophobic pore environment enhances CO2 affinity. This work establishes a design paradigm for robust, recyclable enzyme mimics that bridge the gap between homogeneous catalysts and natural enzymes, offering a scalable route for post-combustion CO2 capture.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3691-9
Near-infrared (NIR) spectroscopy has significantly advanced NIR light sources, yet creating NIR emitters with optimal luminescence properties, high thermal stability, and adjustable emission peaks remains a critical challenge for future smart NIR devices. Here, we introduce a chemical unit cosubstitution strategy by incorporating Ca2+ and Sn4+ ions into the garnet structure. Through this approach, Y3−yCayGa4.95−ySnyO12:0.05Cr3+ (y = 0–1) phosphors were developed by modulating the A&C ligands, resulting in emission centers ranging from 708 to 768 nm. The modified local environment of Cr3+ accounts for the increased light intensity (2.71 times) and broadening observed. Furthermore, this study investigated the impact of varying Cr3+ concentrations (Y2.6Ca0.4Ga4.6−xSn0.4O12:xCr3+) on the production of high-performance phosphors. Compared with Y3Ga4.93O12:0.07Cr3+, the optimized phosphor exhibited exceptional external quantum efficiency (EQE = 34.96%). The luminescence enhancement is attributed to an increase in radiative transitions caused by octahedral Jahn-Teller distortion, whereas the notable thermal stability (91.3% at 423 K) is attributed to the presence of weak electron-phonon coupling (EPC) and oxygen vacancy (OV) defects. Finally, by combining it with a 450 nm blue LED chip, we constructed a near-infrared phosphor-converted LED (NIR pc-LED) device with superior electroluminescence efficiency (18.8% @ 100 mA), increasing the ultralow quenching rate (< 5% intensity loss after 30 days of operation) and demonstrating remarkable performance in plant lighting applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3687-6
P2-Na0.67Ni0.33Mn0.67O2 (NNMO) is a promising cathode for sodium-ion batteries (SIBs) due to its high energy density and operating voltage. However, severe P2-O2 phase transition at high cut-off voltage causes large volume variation, structural degradation, and rapid capacity decay. Ion doping has been explored to suppress this transition, but achieving both high capacity and stability remains challenging. Here, we demonstrate that precise composition regulation enables both. The designed P2-Na0.67Ni0.28Mg0.03Fe0.04Mn0.55Ti0.1O2 retains high electrochemical active element content while effectively suppressing phase transition, leading to outstanding structural stability and fast charge transfer kinetics. This cathode delivers a high specific capacity of 143.5 mAh g−1 at 0.1 C and maintains stable cycling over 1000 cycles. Our work provides a new strategy for rationally designing high-capacity, stable cathode materials for SIBs.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202506010
To facilitate accurate understanding and implementation of the provisions in the Technical Specification for Comprehensive Utilization of Titanium Gypsum (GB/T 45015-2024), and to promote technological capability in comprehensive utilization while effectively controlling environmental risks during utilization, this paper analyzes the current status and existing problems of titanium gypsum generation, management, and utilization technologies in China. The standard is systematically interpreted. It is concluded that the implementation of this standard will promote resource utilization of titanium gypsum, foster energy conservation and carbon reduction in the titanium dioxide industry, and further safeguard ecological and environmental security. China produces over 3,120×10^4 t of titanium gypsum annually (2023), yet its comprehensive utilization rate is only about 10%, far lower than that of phosphogypsum (~40%) and desulfurization gypsum (~80%). The standard, as the first national standard dedicated to titanium gypsum resource utilization, establishes technical pathways for building materials and ecological restoration, sets limits for soluble impurities, and specifies pollution control indicators throughout the utilization process. It addresses the long-standing gaps in technical standards, product quality variability, and environmental supervision, providing critical support for the green and low-carbon transformation of the sulfuric acid process titanium dioxide industry.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202507081
Coal chemical waste salt, a solid residue from evaporative crystallization of high-salinity wastewater, poses significant environmental risks and challenges for resource utilization due to its complex composition. This study systematically analyzes its composition and environmental hazards, highlighting its typical "mixed salt" nature and the potential threats of organic pollutants and heavy metals to soil, water, and ecosystems. It reviews mainstream treatment pathways, including organic degradation, inorganic impurity removal, and salt separation, with a focus on the resource utilization of sodium chloride and sodium sulfate and their industrial prospects. The current pollution control technical specifications and product quality standards are examined, comparing the scope and technical points of relevant standards such as the "Technical Specification for Pollution Control of Chemical Waste Salt." Finally, countermeasures are proposed to address challenges including difficult treatment of mixed salts, insufficient resource utilization incentives, and incomplete standard systems, emphasizing technological innovation, policy guidance, and standard improvement.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4053-5
The rapid and efficient removal of radioactive iodine species from water is critical for nuclear waste treatment, particularly given the short half-life of 131I (8.02 days). Traditional porous inorganic materials exhibit low uptake capacities (<1 g g−1), while porous frameworks such as MOFs and COFs achieve high capacities (>5 g g−1) but suffer from slow removal kinetics, often requiring hours to capture 80% of iodine. This study introduces nonporous naphthobipyrrole-based organic cages (NBP-Cages) that demonstrate ultrafast iodine removal from water. Among the materials tested, type-II Me-NBP-Cage and Et-NBP-Cage, prepared via reprecipitation, exhibit amorphous morphology with small particle sizes (2–6 μm) and low BET surface areas (33.4 and 2.3 m2 g−1, respectively). Despite their nonporosity, these materials achieve >99% iodine removal within seconds, outperforming previously reported sorbents. The adsorption performance correlates with particle size and morphology: amorphous, small particles with effective surface gaps show superior kinetics. The materials are recyclable; for instance, Et-NBP-Cage can be regenerated by washing with acetonitrile, maintaining removal efficiency over five cycles. This work highlights the potential of nonporous organic cages as high-performance iodine sorbents, addressing the critical need for materials that combine high uptake capacity with rapid removal kinetics.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60680-9
Low-temperature chemical looping air separation (CLAS) is a promising technology for producing oxygen-enriched gas streams, utilizing the redox properties of solid oxygen carriers to selectively capture and release oxygen from air. Oxygen vacancy formation energy (Eovf) is a key descriptor for evaluating the ease of oxygen release. In this study, the applicable range of Eovf for CLAS oxygen carriers was determined to be <2.3 eV via thermodynamic calculations. A graph neural network (GNN) model, specifically the ALIGNN architecture, was trained to predict Eovf with a mean absolute error (MAE) of 0.26 eV on the test set. Using this model, a high-throughput screening of 3,649 compositions of SrxA1−xFeyB1−yO3 perovskites was conducted to identify promising CLAS oxygen carriers. The predictions revealed that doping with Ba and Ca at the A-site and Co at the B-site effectively reduces Eovf. The screening criterion of Eovf < 2.3 eV successfully rediscovered several previously reported low-temperature CLAS oxygen carriers, validating the approach. This work demonstrates that GNN-based Eovf prediction can significantly accelerate the discovery of CLAS materials, with broader implications for other chemical looping applications such as full oxidation and syngas production.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4116-0
The design of solid electrolyte interphases (SEIs) for poly(vinylidene fluoride)-based solid-state batteries has largely focused on solvent-affinity of Li+ to generate robust but ionically sluggish LiF-rich layers, inherently compromising transport kinetics. Here, we establish a paradigm based on quantifiable physicochemical descriptors (ionic potential and donor number) to guide the design of amphitropic ion pairs (AIPs). These AIPs are engineered to simultaneously tailor both the solvent-affinity and anion-affinity of Li+: a solvent-philic cation with high ionic potential (Al3+) first sequesters reactive solvents, clearing the path for a high-donor-number, lithium-philic anion (NO3−) to remodel solvation. This rationally guided, sequential mechanism enables the in situ synthesis of a LiF/Li3N heterostructured SEI, where dendrite-suppressing LiF domains are seamlessly integrated with ultra-fast Li3N ion channels. This design heterogeneity effectively enhances stability and kinetics, yielding a robust and highly conductive interface. Consequently, Li|Li cells achieve >2000 h of stable cycling, and Li|LiNi0.8Co0.1Mn0.1O2 full cells surpass 600 cycles.