SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4248-2
Marine biofouling imposes substantial operational penalties on maritime assets, yet commercial silicone foul-release coatings rely on static, non-adaptive networks that cannot be reprocessed or repaired. This work introduces selenonium-salt-catalyzed dynamic siloxane exchange as a route to polydimethylsiloxane (PDMS) vitrimer coatings. The authors incorporate A16Se+ organoselenium catalysts into PDMS networks at loadings designated A16Se+xPDMS, enabling thermally activated siloxane bond exchange that confers vitrimeric stress relaxation, reprocessability, and high-temperature self-healing. Antibiofouling performance is benchmarked against pristine PDMS using colony morphology assays for Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa, SEM imaging of bacterial adhesion after 3 h, Chlorella fluorescence adhesion quantification, zeta potential measurements, and 3-month seawater immersion panels. Reviewer 1 questioned the direct relevance of recyclability and high-temperature self-healing to marine antifouling and requested that surface elastic modulus and Pseudomonas antibacterial data be elevated to the main text. In response, the authors relocated scratch and self-healing results from Figure 5 to Supporting Information Figures S12 and S13, condensed the main-text discussion, and integrated surface elastic modulus data into Figure 4G and Pseudomonas antibacterial results into Figure 6A. The revised manuscript positions dynamic exchange as supporting evidence of network dynamics rather than as a primary antifouling metric, while foregrounding modulus and antibacterial performance as the application-relevant properties.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4267-y
The synthesis of two-dimensional MBenes from MAB-phase ceramics is impeded by uncontrolled etching kinetics that compromise structural integrity and yield. This study introduces a vacuum molten salt strategy to regulate space-charge accumulation during the selective removal of Al from Mo2AlB2, producing honeycomb-like architectures. The vacuum environment suppresses oxidative side reactions and modulates ionic transport, enabling precise control over etching depth and morphology. The resulting Mo2AlB2 exhibits exceptional electromagnetic wave absorption, with a minimum reflection loss of -56.3 dB at 2.4 mm and an effective absorption bandwidth of 6.8 GHz. These metrics surpass conventional etching-derived MBenes by a factor of 2.5 in attenuation capacity. The space-charge-regulated mechanism is elucidated through in situ spectroscopic and computational analyses, revealing that vacancy-induced charge redistribution governs the etching front propagation. This work establishes a scalable route for high-purity MBenes with tailored porosity, addressing critical bottlenecks in energy absorption and catalytic applications. The vacuum molten salt approach eliminates the need for hazardous HF, offering a safer and more environmentally benign pathway for industrial translation.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202508013
The Sanshenggong section of the Yellow River is a critical hydrological monitoring and control point, whose water quality directly affects the ecological safety and sustainable water resource utilization of the middle and lower reaches. This study analyzed water quality monitoring data from 2011 to 2024 using the Mann-Kendall test to identify abrupt change years, combined with single-factor evaluation and a fuzzy comprehensive evaluation method improved by CRITIC-entropy weight combination to systematically assess water quality evolution. The Mann-Kendall test identified 2013 and 2019 as abrupt change points, with non-significant improvement from 2013 to 2015 and significant improvement after 2016. Single-factor evaluation indicated that total phosphorus (TP) was the primary exceeding factor in 2011–2012, and its declining concentration drove the water quality upgrade from Class III to Class II in 2013. The CRITIC-entropy weight combination assigned the highest weight (28.96%) to permanganate index, whose decline was the core driver of water quality improvement. The improved fuzzy evaluation showed that the membership degree of Class III water dropped to zero in 2013, indicating stable improvement, but periodic rebounds in Class II membership suggested potential degradation risks. This study provides scientific evidence for ecological protection and high-quality development of the Yellow River Basin.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202509124
To reveal the spatiotemporal evolution and driving mechanisms of water quality in the Hanjiang River Basin, this study utilized monthly water quality monitoring data from 54 sections from January 2021 to April 2024. Methods including single-factor index, comprehensive water quality index (WQI), principal component analysis (PCA), and optimal parameters-based geographical detector (OPGD) were employed. Results indicated significant spatiotemporal differences, with total nitrogen (TN), chemical oxygen demand (COD), and permanganate index (CODMn) as major pollutants, TN being the most critical. Temporally, agricultural non-point source organic pollution dominated in wet season, while comprehensive organic pollution with industrial point source characteristics prevailed in dry season. Spatially, water quality deteriorated along the main stream, with tributary downstream areas showing severe pollution, forming a pattern of 'mountainous areas good, plains poor'. OPGD revealed combined effects of natural conditions and human activities, proposing a 'zonal control and targeted treatment' strategy.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202512025
Persulfate (PS) is a common oxidant in in-situ chemical oxidation (ISCO) for groundwater organic contamination, but its vertical concentration stratification may lead to inefficient remediation of light non-aqueous phase liquids (LNAPLs). To investigate the vertical stratification characteristics of PS in porous aquifers and its impact on LNAPLs remediation, static water column experiments and flowing water sand tank experiments were conducted. The migration behavior of PS under non-slow-release and slow-release conditions was compared, with Br− as a reference tracer and benzene, toluene, and xylene (BTX) as LNAPLs contaminants. Results showed that in static water columns, Br− exhibited weak vertical migration, short migration distance, and a low decay rate (0.009 d−1), consistent with a stable tracer. In contrast, PS showed strong vertical migration, with concentrations increasing with depth; under slow-release conditions, the concentration difference between the top and bottom of the column could reach two orders of magnitude. Br− migration was dominated by molecular diffusion (effective diffusion coefficient 2.2×10−9 m2·s−1), while PS migration was driven by both diffusion and density. Under slow-release conditions, the average PS decay rate was 0.072 d−1, slightly higher than the non-slow-release rate (0.059 d−1). In both column and sand tank experiments, BTX exhibited a distinct shallow-layer distribution, contrasting with PS. When the aquifer thickness is large, PS stratification limits its contact with LNAPLs contaminants, increasing remediation cost and difficulty. These findings provide theoretical reference for PS-based ISCO remediation of LNAPLs in porous aquifers.