SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3629-3
Electrically pumped lasers with reduced physical dimensions are critical for future optical information processing, storage, and photonic integrated circuits. However, electrical injection in perovskite lasers faces challenges including material instability, non-radiative losses, and Joule heating. Here, we demonstrate an ultralow-threshold perovskite microlaser decorated with gold nanoparticles (AuNPs), enabling simultaneous optical pumping and current injection at ambient temperature. The lasing threshold is reduced to 8.6 μJ/cm², approximately 44% lower than that of pristine devices (15.3 μJ/cm²). The AuNPs, with optimized size, enhance both lasing performance and electrical properties, achieving a current injection density of 2.98 kA/cm². AuNPs accelerate hot-carrier cooling, reducing non-radiative recombination and mitigating Joule heating. The threshold decreases progressively with increasing electrical assist fraction. Stability tests confirm excellent resistance to aging and humidity, with stable lasing output under co-excitation in ambient air. This work underscores the feasibility of electrically driven perovskite microlasers, offering a pathway toward electrically pumped microlaser diodes.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3538-6
The understanding of anion transporting behaviors under sub-nanoconfined regimes can guide the design of high-performance anion selective membranes (ASMs), yet it is little known. Here, we build membrane channels that combine physical rigidity with chemical affinity to anions simply through bridging graphene oxide nanosheets with charged linkers. We observe that the rigidly confined interaction imposed by channels to anions can reconfigure hydration shells in varying degrees for different anions via compensating for hydration-induced energy barriers and differentiating their rearrangement behaviors. During the configuration evolution, water molecules within hydration shells would rotate and simultaneously change their distance from the ion center. Based on the big discrepancy in configuration evolution, these membranes can realize ultrahigh selectivity of, for example, 125 for Cl−/SO4^2− and surpass the performance upper bound concerning Cl−/SO4^2− separation by other membranes. The knowledge of the configuration change of hydration shells during the dehydration process will be key to designing next-generation ASMs.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202605005
Water quality prediction is essential for river basin management, yet existing models often struggle with non-stationary, noisy monitoring data. This study collected water quality data from two city-level control sections in southern China from December 2020 to June 2024, including eight indicators: water temperature, turbidity, pH, conductivity, dissolved oxygen (DO), ammonia nitrogen (NH4+-N), total phosphorus (TP), and permanganate index (CODMn). To predict four key indicators (DO, NH4+-N, TP, CODMn), we developed hybrid models combining seasonal trend decomposition (STD), Bayesian hyperparameter optimization, and either random forest (RF) or XGBoost. STD smoothed and denoised the data while extracting seasonal factors; Bayesian optimization tuned model hyperparameters. Evaluation showed that the STD-Bayesian-XGBoost model achieved smaller bias errors and higher prediction accuracy than STD-Bayesian-RF. Specifically, XGBoost reduced root mean square error (RMSE) by 15-20% across all four indicators and improved the coefficient of determination (R²) to above 0.90, compared to RF's 0.85-0.88. The models were validated on southern river data, but the methodology is generalizable to other climatic and hydrological settings. This work provides a technical reference for pollution reduction and carbon management in regional watersheds.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3859-y
Photocatalytic CO2 reduction is an attractive route to address sustainable energy crises and environmental issues, yet its efficiency is limited by poor charge separation, narrow light absorption, sluggish kinetics, and low CO2 adsorption/activation. Here, a series of Co SA-TT-COF/CdS S-scheme heterojunction photocatalysts were synthesized by integrating Co single atoms (Co SA) decorated covalent organic frameworks (COFs) with CdS nanotubes via in situ condensation and post-modification. The TT-COF layer thickness on CdS was regulated to optimize active site density and accessibility. The optimal Co SA-TT-COF/15 wt% CdS heterojunction, with a TT-COF thickness of 50.5 nm, achieved a CO production rate of 14157 μmol g−1 h−1 and a selectivity of 90.9%, among the best COF-based photocatalysts reported. Theoretical calculations, experiments, and femtosecond transient absorption spectroscopy revealed that the S-scheme heterojunction enhances the built-in electric field, optimizes energy levels, narrows bandgaps, extends light harvesting, improves charge separation and transfer kinetics, and lowers energy barriers for CO2 adsorption/activation, directly contributing to superior performance.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3797-2
Water electrolysis is a promising method for producing green hydrogen from renewable energy sources. The mainstream membrane-based water electrolysis technologies include proton exchange membrane water electrolysis (PEMWE), alkaline water electrolysis (AWE), and anion exchange membrane water electrolysis (AEMWE). Each technology has inherent limitations: PEMWE requires expensive platinum group metal catalysts and fluorinated membranes; AWE uses porous diaphragms, limiting operational window and differential pressure capability; AEMWE suffers from quaternary ammonium group degradation under alkaline conditions. Ion-solvating membranes (ISMs), dense polymeric membranes with solvation sites that absorb aqueous alkaline electrolytes, offer an alternative. Most ISMs are based on polybenzimidazole (PBI), but achieving high efficiency at low alkali concentrations remains a bottleneck. Introducing sulfonic acid moieties into PBI enhances water and KOH uptake, improving conductivity, but alkali stability often requires crosslinking, which hampers scale-up. Henkensmeier et al. adapted sulfonated polybenzimidazole (SPBI) membranes originally for PEM fuel cells to ISMWE. By copolymerizing sulfonated and non-sulfonated monomers, they created a series of SPBI membranes with varying sulfonation degrees. The sulfonated segments boost electrolyte uptake and conductivity, while non-sulfonated units ensure alkali resistance and mechanical stability. Deprotonated benzimidazole rings increase electron density on ether carbons, enhancing stability in basic environments. The 50SOPBI-act membrane exhibited promising performance, with record ionic conductivity of 135 mS cm−1 at room temperature and 358 mS cm−1 at 80 °C in 1 M KOH, outperforming existing AEMWE and ISMWE systems.
SCIENCE CHINA Materials•2025•DOI: 10.1007/s40843-025-3631-1
Anion exchange membrane water electrolysis (AEMWE) offers cost and dynamic-response advantages over proton exchange membrane systems, yet commercial deployment is constrained by the alkaline stability of anion exchange membranes (AEMs) and the sluggish kinetics of non-precious metal catalysts. This work reports a series of poly(terphenyl-diphenylmethane piperidinium) (QPDPMTP) membranes synthesized with varied diphenylmethane (DPM) content. The alkyl chain of DPM induces pronounced microphase separation and elevates free volume fraction, yielding an OH− conductivity of 152 mS cm−1 at 80 °C for QPDPMTP-10. After 1032 h immersion in 6 M NaOH at 80 °C, the membrane retains 90.7% of its initial conductivity. An AEMWE cell integrating QPDPMTP-10 with a non-precious NiFeCo LDH/NiS/NF anode achieves 3.11 A cm−2 at 2 V in 1 M KOH at 80 °C and sustains 1 A cm−2 for 1800 h under gradient KOH concentration. These results establish a viable pathway for durable, low-cost AEMWE systems.