SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4244-0
Near-infrared perovskite light-emitting diodes (NIR-PeLEDs) suffer from poor operational stability, largely due to interfacial reactions at the electron-transport layer (ETL)/perovskite interface. Here, we introduce a zinc ion (Zn2+)-chelated hybrid ETL derived from a Zn2+-chelated polyethylenimine ethoxylated (PEIE) complex, which partially retains the surface properties of ZnO but exhibits significantly reduced oxygen defects and surface-adsorbed hydroxyl groups. This well-modulated surface promotes perovskite crystallization and mitigates interface-induced deprotonation of organic cations during device operation. Consequently, NIR-PeLEDs employing this hybrid ETL achieve a peak external quantum efficiency (EQE) of 20.1%, a high radiance of 652 W sr-1 m-2, and an exceptional T50 lifetime of 270.7 hours at a high current density of 100 mA cm-2, which is over five times that of devices based on conventional ZnO nanocrystal (NC) ETLs. Our results present an effective ETL strategy for operationally stable NIR-PeLEDs and thoroughly reveal the critical role of regulating interfacial reactions in stabilizing buried interfacial contacts. These findings provide valuable insights for advancing perovskite optoelectronic devices that suffer from interface-induced performance degradation.
New Carbon Materials•2026•DOI: 10.1016/S1872-5805(26)61071-2
Aqueous zinc-ion capacitors (ZICs) are promising energy storage systems due to their high specific capacity and superior reliability. Heteroatom-doped carbon materials have been shown to substantially increase the capacitance of ZICs, yet the underlying mechanisms remain poorly understood. In this work, coal-based activated carbon was functionalized with both boron (B) and nitrogen (N) to serve as the cathode material in ZICs. The optimized material, designated CAC-120, exhibits a high specific capacity of 371.4 mAh g−1 at 1 A g−1 and retains 74% of its initial capacity after 10,000 cycles. Electrochemical analysis and density functional theory (DFT) calculations reveal that pyridinic N plays a crucial role in enhancing Zn2+ storage, demonstrating superior electrochemical reversibility. Furthermore, an assembled aqueous ZIC using the CAC-120 cathode achieves a high reversible capacity of 90.8 mAh g−1 at 0.2 A g−1 and exceptional long-term stability over 17,000 cycles. This work provides valuable insight into the design of high-capacity and ultrafast pseudocapacitive carbon cathodes for ZICs, highlighting the synergistic effects of pore structure engineering and heteroatom doping.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3681-6
Brominated butyl rubber (BIIR) is widely used in tires and biomedical products due to its excellent elasticity and gas barrier properties, but recycling end-of-life BIIR remains challenging because of its covalent cross-linked network. Here, we report a direct upcycling strategy for unmodified waste BIIR via nanoparticle-mediated interfacial crosslinking, avoiding chemical modification or degradation of the polymer structure. Pyridyl-functionalized silica nanoparticles (SiO2-Py) were synthesized and used to crosslink bromine atoms in waste BIIR with those of fresh BIIR, reconstructing the crosslink network without altering the original sulfur-vulcanization network. The resulting composites exhibit a dual interpenetrating network comprising the sulfur-vulcanized network and a bromine-pyridinium crosslinked silica-rich network, providing exceptional strength and toughness. Using discarded bicycle inner tubes as waste BIIR source, the upcycled composites achieved a tensile strength of ~14 MPa, toughness of ~60 MJ m−3, and ultra-low air permeability of 8.78×10−15 cm3 cm/(cm2 s Pa), significantly outperforming the original inner tube material. This work presents a scalable and effective solution for BIIR waste recycling, advancing sustainable development in the rubber industry.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202508013
The Sanshenggong section of the Yellow River is a critical hydrological monitoring and control point, whose water quality directly affects the ecological safety and sustainable water resource utilization of the middle and lower reaches. This study analyzed water quality monitoring data from 2011 to 2024 using the Mann-Kendall test to identify abrupt change years, combined with single-factor evaluation and a fuzzy comprehensive evaluation method improved by CRITIC-entropy weight combination to systematically assess water quality evolution. The Mann-Kendall test identified 2013 and 2019 as abrupt change points, with non-significant improvement from 2013 to 2015 and significant improvement after 2016. Single-factor evaluation indicated that total phosphorus (TP) was the primary exceeding factor in 2011–2012, and its declining concentration drove the water quality upgrade from Class III to Class II in 2013. The CRITIC-entropy weight combination assigned the highest weight (28.96%) to permanganate index, whose decline was the core driver of water quality improvement. The improved fuzzy evaluation showed that the membership degree of Class III water dropped to zero in 2013, indicating stable improvement, but periodic rebounds in Class II membership suggested potential degradation risks. This study provides scientific evidence for ecological protection and high-quality development of the Yellow River Basin.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3965-5
Liquid crystal elastomers (LCEs) have emerged as a promising material platform for soft robotics, effectively integrating programmable molecular orientation with the inherent flexibility of elastomers. This unique combination enables significant, reversible deformations responding to external stimuli, including heat, light, electric, and magnetic fields. Due to these characteristics, LCEs serve as an ideal material system for bridging biological principles with engineered soft robotic applications, enabling the development of adaptive and multifunctional systems with enhanced biomimetic capabilities. However, the mechanisms of bioinspired motion and the effective integration of biomimetic functions in LCE-based robots remain insufficiently explored. This review systematically examines recent advances in LCE-based biomimetic soft robots, focusing on multimodal actuation strategies, including contraction, crawling, rolling, jumping, swimming, and plant-inspired motions. It highlights integrated functional enhancements achieved via innovative material compositions, structural designs, and advanced manufacturing techniques. These developments have enabled novel robotic functionalities, including programmable actuation, self-healing and recycling, color morphing and camouflage, and tunable bioinspired surface characteristics.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202511050
Municipal solid waste (MSW) management in Inner Mongolia has long relied on landfilling, facing land scarcity and leachate management challenges. This study addresses the region's dry, cold climate, high proportion of agricultural and livestock waste, fluctuating moisture content, and weak leachate treatment capacity. An engineering optimization was implemented on an 80 t·d−1 vertical rotary gasification-incineration system featuring a dual-combustion-chamber design (primary chamber for medium-temperature pyrolysis-gasification at 550–650 °C and secondary chamber for high-temperature oxidation above 900 °C), coupled with in-situ leachate recirculation. Field measurements showed improved processing capacity and continuous operation stability. Under the project's leachate yield, in-situ recirculation achieved on-site disposal without significant adverse effects on gasification-incineration conditions, providing buffering against moisture fluctuations. During the monitoring period, major gaseous pollutant emissions remained below current national standards. The results provide engineering references for the co-processing and stable operation of small-scale county-level MSW treatment facilities.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025042502
Rice husk biochar (BC) was modified with boron (B) and nitrogen (N) doping and loaded with Fe3S4 to fabricate B-BC@Fe3S4 and N-BC@Fe3S4 catalysts for peroxydisulfate (PDS) activation and enrofloxacin (ENR) degradation. Characterization via SEM, BET, XRD, Raman, and XPS confirmed successful heteroatom incorporation and uniform Fe3S4 dispersion, enhancing specific surface area and defect sites. Degradation experiments showed that B-BC@Fe3S4 and N-BC@Fe3S4 achieved ENR removal efficiencies of 90.72% and 91.89%, respectively, significantly outperforming unmodified BC@Fe3S4 (82.21%). Mechanistic studies revealed that PDS activation proceeded via Fe3S4-mediated electron transfer generating radical species (SO4•−, •OH, O2•−) and via B/N functional groups promoting non-radical singlet oxygen (1O2) formation. Notably, N-BC@Fe3S4 exhibited superior resistance to Fe3+ leaching and greater environmental adaptability under varying pH, anion, and humic acid conditions. These findings demonstrate that B/N-doped biochar-supported Fe3S4 are effective catalysts for PDS activation, offering promising potential for antibiotic removal from real wastewater matrices.