SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4206-6
Precise patterning of highly ordered organic semiconductor (OSC) thin-film arrays is critical for next-generation electronics. We report a ladder-like polysilsesquioxane (LPSQ) strategy to synthesize two functional analogs with tunable surface energies and robust dielectric properties. These LPSQ dielectrics, functionalized with alkyl or fluoroalkyl side chains, serve dual roles as gate insulators and patterning layers to guide blade-coating of 2,7-dioctyl[1]benzothieno[3,2-b][1]benzothiophene (C8-BTBT). This approach yields highly aligned arrays suitable for three-dimensional integration in flexible electronics. Synergistic combination of dense LPSQ dielectric packing and aligned semiconductor domains leads to excellent organic thin-film transistor (OTFT) performance, achieving approximately four-fold improvement in field-effect mobility compared to conventional silicon oxide dielectrics. Patterned LPSQ dielectrics enable high-resolution C8-BTBT patterning on plastic substrates, supporting 4-inch-scale 3D integration of flexible logic circuits, including inverters (voltage gain >100), NOR gates, and NAND gates. This work provides a scalable route to high-performance, large-area flexible organic circuits.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4022-7
Transition metal nitrides (TMNs) have emerged as promising alternatives to noble metals in electrocatalysis due to their noble metal-like electronic structures, high conductivity, low cost, and robust chemical stability against corrosion and oxidation under harsh conditions. The rational design and controlled synthesis of TMNs with distinct structures are crucial for developing highly efficient electrocatalysts. This review comprehensively summarizes representative synthetic strategies for TMNs, including direct nitridation, solid-state reaction, sol-gel assisted reaction, and wet-chemical reaction. It presents distinct structural characterizations and demonstrates their advances in electrochemical applications. Finally, the remaining challenges and future research directions for exploring TMNs with well-defined structures are proposed, aiming to guide the development of high-performance electrocatalysts.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202604026
Polycyclic aromatic hydrocarbons (PAHs) are persistent organic pollutants ubiquitously present in soils, posing severe risks to ecosystems and human health. This study synthesized MIL-88A(Fe) via a hydrothermal solvent method and applied it to the photocatalytic degradation of phenanthrene-pyrene (PHE-PYR) composite contaminants in soil, investigating the adsorption-photocatalytic synergy. Results demonstrated that adsorption of PHE-PYR onto MIL-88A(Fe) was dominated by physical and monolayer surface adsorption, with a maximum adsorption capacity of 97.25 mg/kg. This strong adsorption increased pollutant concentration near active sites, accelerating photocatalytic degradation. Under optimal conditions—3% catalyst dosage, 40% soil water content, 60 min visible light irradiation, initial pollutant concentration of 200 mg/kg, and acidic soil—the total degradation efficiency reached 79.20%. Photoelectrochemical characterization revealed significant visible-light response (200–600 nm), a narrow bandgap of 3.04 eV, and favorable band structure facilitating efficient electron-hole separation. Quenching experiments identified superoxide radicals (·O2−) and holes (h+) as primary reactive species. GC-MS analysis of intermediates indicated that PYR undergoes hydroxylation, oxidation, and ring-opening to form PHE, which is further hydroxylated and oxidized, ultimately mineralizing to CO2 and H2O. This work provides an efficient strategy for remediating PAH-contaminated soils.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3937-7
Triple-negative breast cancer (TNBC) remains a formidable clinical challenge due to its high invasiveness and adaptive resistance. We report a bio-mimetic nanoplatform (HMPB-GOx@HSA-Cu2+) integrating starvation therapy, Fenton/Fenton-like catalysis, and mild photothermal therapy (mPTT) for synergistic TNBC treatment. The nanoreactor comprises a hollow mesoporous Prussian blue (HMPB) core loaded with glucose oxidase (GOx), encapsulated in a human serum albumin (HSA) shell covalently functionalized with Cu2+ ions. This design enables spatiotemporal control of Cu2+-mediated Fenton catalysis, responding to the tumor microenvironment (TME) to generate cytotoxic hydroxyl radicals (·OH). GOx catalyzes glucose depletion, elevating H2O2 levels and acidity, thereby enhancing catalytic efficiency. Concurrently, mPTT at ~43–45°C accelerates the Fenton reaction and suppresses heat shock protein (HSP) expression, overcoming thermal tolerance via ATP depletion. In vitro and in vivo studies demonstrate significant anti-tumor efficacy through reactive oxygen species (ROS) accumulation and metabolic disruption, with excellent biocompatibility. This work presents a highly integrated strategy for precise TNBC therapy, addressing limitations of conventional monotherapies.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3977-8
Single quantum well (single-QW) two-dimensional (2D) perovskites are poised to revolutionize optoelectronic devices owing to their superior stability and optoelectronic properties. However, solution-processed 2D perovskites typically suffer from disordered multiple-QW structures, leading to inconsistent device performance. Here, we introduce a solvent-hydrolysis-driven method to control crystallization kinetics, yielding highly ordered single-QW 2D perovskite films. Dimethylamine (DMA), generated from the hydrolysis of N,N-dimethylformamide (DMF), serves as a critical mediator, preventing cluster aggregation and ensuring a uniform colloidal distribution. This approach circumvents the formation of a heterogeneous intermediate phase, thereby promoting the formation of a homogeneous (DMA,MA)PbI3 phase, which is essential for single-QW film development. The resultant photodetector exhibits outstanding performance, with a responsivity of 1153 mA/W and a detectivity of 6.98 × 10^12 Jones, along with excellent photostability under ambient conditions. These attributes render it ideal for photoelectric imaging sensors and large-scale integration. Our findings establish a scalable, solution-processed strategy for high-performance 2D perovskite materials, opening new avenues for advanced optoelectronic applications.