SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4432-9
Sodium vanadium phosphate (Na3V2(PO4)3, NVP) with NASICON structure is a promising cathode for sodium-ion batteries but suffers from low electronic conductivity and a high energy barrier for the V4+/V5+ redox couple, limiting practical energy density. A medium-entropy tuning strategy yields the multi-element substituted Na3.2V1.5Cr0.1Fe0.1Mn0.1Ni0.1Ti0.1(PO4)3 (ME-NVP). Entropy modulation tailors the microscopic electronic structure, enabling reversible V4+/V5+ redox at 4.0 V. Analyses reveal a synergistic diffusion mechanism that accelerates Na+ transport and enhances multiple-electron redox kinetics. Ex-situ X-ray diffraction confirms highly reversible structural evolution during cycling. The ME-NVP cathode delivers 116.8 mAh g-1 at 0.1C and retains 83.9% of initial capacity after 1000 cycles at 20C, with excellent performance from -12 to 50 °C. This work demonstrates that configurational entropy regulation unlocks high-energy polyanion cathodes for advanced sodium-ion batteries.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3630-2
This study demonstrates a dual-interface engineering approach for performance enhancement in perovskite-silicon tandem solar cells. By applying ethylenediamine dihydroiodide (EDAI2) to simultaneously modify both top and bottom interfaces of wide-bandgap perovskite layers, we achieve synergistic defect suppression and charge transport optimization. Time-resolved photoluminescence characterization reveals extended carrier lifetimes and improved spatial homogeneity in dual-modified perovskite films. The optimized single-junction wide-bandgap (>1.66 eV) perovskite solar cells attain a champion efficiency of 22.75% with enhanced operational stability. Implemented in perovskite-silicon tandem configuration, the devices achieve over 31% power conversion efficiency, validating the effectiveness of organic ligand-mediated dual-interface engineering in regulating carrier dynamics and advancing perovskite-based tandem photovoltaics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3713-y
Layered double hydroxides (LDHs) are promising electrocatalysts for the oxygen evolution reaction (OER), yet their practical application remains limited by poor electrical conductivity and sluggish reaction kinetics. In this work, we synthesize three high-entropy LDHs (HELDHs) featuring a hierarchical architecture of microspheres assembled from ultrathin nanosheets, via a simple hydrothermal method using a combination of low-cost, catalytically active transition metals (Fe, Co, Ni, Mn, Zn, Cu, and Cr). Among them, the FeCoNiMnZn HELDH exhibits outstanding OER performance, requiring an overpotential of only 306 mV to reach a current density of 100 mA cm−2. Notably, during 200 h of continuous operation, the device exhibits a stable and, in some cases, increasing current output. This exceptional activity is attributed to the formation of abundant cation vacancies, induced by Zn leaching, which enhance the intrinsic catalytic properties by optimizing the adsorption energies of key OER intermediates. Density functional theory calculations further validate that these vacancies modulate the electronic structure and lower reaction barriers, underscoring the effectiveness of cation-vacancy engineering in high-entropy systems for efficient and durable water oxidation catalysis. The optimized catalyst was further evaluated as the air cathode in a zinc–air battery, demonstrating practical electrochemical performance.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3634-0
Messenger RNA-lipid nanoparticle (mRNA-LNP) vaccines have demonstrated extraordinary efficacy against severe acute respiratory syndrome coronavirus 2, establishing LNPs as the premier platform for mRNA therapeutics. However, the pervasive presence of anti-polyethylene glycol (PEG) antibodies undermines PEGylated LNP performance by diminishing therapeutic efficacy. To address this challenge, we synthesized a panel of lipid-poly(2-oxazoline) (lipid-POx) conjugates as alternatives to lipid-PEG and systematically evaluated how their polymer backbone, degree of polymerization, and lipid tail structure influence LNP physicochemical properties and mRNA delivery performance. Among POx-LNPs formulated with heptadecan-9-yl 8-((2-hydroxyethyl)(6-oxo-6-(undecyloxy)hexyl)amino)octanoate (SM-102) as the base lipid, those constructed with single-tailed C18-POx exhibited smaller particle sizes and superior freeze-thaw stability. These C18-POx-LNPs maintained comparable in vivo transfection efficiency to PEG-LNPs even when fully replacing 1,2-dimyristoyl-sn-glycero-3 (DMG)-PEG. Notably, in mice bearing pre-existing anti-PEG antibodies, C18-POx-LNPs demonstrated over 200-fold higher transfection efficiency than PEG-LNPs. Additionally, repeated administration of POx-LNPs induced dose-dependent anti-POx immunoglobulin M (IgM) and IgG responses, with antibody titers inversely correlated with POx hydrophilicity. This study underscores the effectiveness of substituting PEG with POx in LNP construction to address the transfection efficiency in populations with pre-existing anti-PEG antibodies, and would inspire the development of more hydrophilic polymers for LNP formulation.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202508101
The emission of sulfur dioxide (SO2) and nitrogen oxides (NOx) from fossil fuel combustion and metal smelting industries poses severe risks to environmental and human health. This study utilized depleted lead-zinc molten slag as a desulfurizer for wet flue gas desulfurization, and the resulting desulfurization slurry was further employed for NOx removal, achieving resource utilization. The desulfurization efficiency of the slag was determined, and NaClO2 was identified as the most effective oxidant when combined with the slag slurry for NOx removal. The effects of NaClO2 concentration, reaction temperature, flue gas flow rate, oxygen concentration, NOx concentration, and pH on removal efficiency were investigated. Optimal conditions were found at NaClO2 concentration of 2.5 mmol·L−1, temperature 45 °C, flue gas flow 200 mL·min−1, O2 volume fraction 10%, NOx volume fraction 0.03%, and pH 6, achieving a NOx removal efficiency of 97.24%. Metal ion experiments revealed that Fe3+, Zn2+, Mn2+, and K+ exhibited synergistic effects with NaClO2, with Fe3+ showing the most significant enhancement. Fe3+ promoted the decomposition of NaClO2 to generate stronger oxidants such as ClO2, thereby enhancing NOx oxidation and absorption. This approach offers a cost-effective and environmentally friendly alternative to traditional selective catalytic reduction, avoiding ammonia slip and secondary pollution.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202606008
Resin-enhanced electrosorption for water treatment significantly improves ion adsorption efficiency and selectivity through synergistic effects, making it a research hotspot in the water treatment field. This technology provides an innovative solution to the bottlenecks of kinetic lag and insufficient selectivity by modulating electrode-solution interface behavior in multiple dimensions. Current technological advances include the following: a simple integration method enables desalination efficiency to exceed 92.3%; resin-coated composite electrodes eliminate the co-ion effect and achieve a 42% increase in total salt adsorption capacity; resin-derived porous carbon electrodes with tunable pore structures possess three to five times the adsorption capacity of commercially available activated carbon; and by enhancing solution convection and electrophoretic convection, the resin-filling strategy achieves a high desalination rate of (670 ± 20) mg/(L·h). Studies have demonstrated that different material combinations can achieve targeted optimization of adsorption performance based on specific water quality characteristics. Future research directions may focus on: developing intelligent resin materials with electromagnetic responsiveness; constructing a multi-scale structural design theory for resin-electrode systems; and establishing a cross-scale model integrating electrochemistry, fluid dynamics, and interface science for comprehensive analysis. In particular, in-depth studies are needed on the dynamic behavior of resin-based flow electrodes under electric/magnetic field regulation, as well as the precise construction of catalytic sites on the resin surface. This review aims to promote the widespread application and efficient practice of this technology in water treatment, providing a theoretical foundation and scientific basis for the future development of high-efficiency, selective, and stable electrosorption technologies.