SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3710-y
Layered transition metal oxide cathodes for sodium-ion batteries (SIBs) suffer from Jahn–Teller distortion of MnO6, Na+/vacancy ordering, and irreversible lattice oxygen loss, causing capacity fading and voltage decay. Here, we report a P2-type material, Na0.67Ni0.3Mn0.6Li0.09Sn0.01O2 (NNMO-Li0.09Sn0.01), co-doped with closed-shell Li+ and Sn4+ ions. Li+ increases the Mn4+/Mn3+ ratio, mitigating Jahn–Teller distortion, and disrupts Ni/Mn ordering, suppressing Na+/vacancy ordering. Sn4+ forms stronger Sn–O bonds (548 kJ mol−1), enhancing bonding between transition metal ions and oxygen, reducing oxygen loss. NNMO-Li0.09Sn0.01 delivers a specific capacity of 90.3 mAh g−1 with 62.9% capacity retention after 50 cycles at 0.1 C (1 C = 200 mA g−1), and 90.3% voltage retention. This closed-shell substitution strategy offers a viable approach for enhancing structural stability of wide-voltage layered oxide cathodes.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3815-0
The development of bifunctional electrocatalysts capable of integrating biomass-derived platform molecule oxidation with organic reduction offers a promising strategy for simultaneously enhancing energy efficiency and generating high-value chemicals. However, designing catalysts that exhibit both high activity and stability in integrated systems remains a significant challenge. Herein, we report a self-supported electrode composed of nitrogen-doped carbonized wood (NCW) supported NiCo nanosheets (NiCo 0.3/NCW) that enables the electrocatalytic 5-hydroxymethylfurfural oxidation to produce 2,5-furandicarboxylic acid (FDCA) and the nitrobenzene reduction to yield aniline in an integrated electrochemical cell. The NiCo 0.3/NCW electrode achieves the production of FDCA and aniline at a low cell voltage of 1.7 V, with ~99% anodic and ~92% cathodic Faradaic efficiencies, respectively. Experimental characterizations disclose that the hierarchical porous NCW architecture promotes the dispersion of active sites, while nitrogen doping strengthens metal–support interactions. In-situ spectroscopic experiments combined with density functional theory (DFT) calculations reveal that cobalt incorporation tunes the electronic structure of nickel, thus optimizing substrate and intermediate adsorption, and lowering energy barriers. These effects ultimately enhance the performance of the natural wood-derived catalyst in integrated biomass valorization and selective organic electrosynthesis.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2024120203
Potassium permanganate (KMnO4) oxidation is a promising technology for organic pollutant removal in water due to its low cost and broad pH applicability. However, its moderate oxidation capacity results in slow degradation rates for refractory organic compounds. Carbon materials (CMs), known for their accessibility, stability, and environmental compatibility, have shown great potential in enhancing KMnO4 oxidation. This paper provides a comprehensive review of recent advancements on the enhancement of KMnO4 oxidation of organic pollutants by CMs. The performance and suitability of various CMs in improving KMnO4 oxidation were systematically compared. Additionally, two key mechanisms driving the degradation of organic pollutants in the KMnO4/CMs system were elucidated, along with a discussion on the recycling and regeneration of CMs. Finally, future research directions and development trends for this technology were outlined, aiming to offer insights to advance the practical application of KMnO4/CMs system in water treatment.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3842-8
The metal-support interactions (MSIs) play a significant role in regulating the electronic structure of metal species on oxide; however, they are often overlooked on carbon-based supports. In this work, hollow nitrogen-doped carbon (H-NC) supported Ru nanoparticles catalyst (Ru/H-NC) was prepared by a solvothermal method using H-NC as support and RuCl3 as precursor. Subsequently, Ru/H-NC was annealed at different temperatures (Ru/H-NC t °C) to adjust the effect of MSIs between H-NC support and Ru nanoparticles. The X-ray photoelectron spectroscopy results showed that the MSIs between Ru species and H-NC support increased with the increase of temperature, and more electrons were transferred from Ru species to H-NC support, thus regulating the valence state of Ru. In hydrogen evolution reaction (HER), the as-synthesized Ru/H-NC 300 °C merely requires overpotential of 35.45 mV to achieve 10 mA/cm2 at low Ru mass loading of 24.03 μg/cm2 on the glassy carbon electrode. The cyclic voltammetry test revealed that the electrochemically active surface area increased first and then decreased with the increasing MSIs. Moreover, electrochemical impedance spectroscopy results showed that HER kinetics of Ru/H-NC t °C catalysts increased first and then decreased with the MSIs enhancement. The density functional theory calculations confirmed that the MSIs effectively optimize the adsorption strength of the key intermediates (H*, HO*) on Ru clusters, and thus greatly improve the catalytic performance of Ru/H-NC in HER.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3968-3
The commercialization of perovskite solar cells (PSCs) is hindered by stability issues primarily stemming from interfacial defects. This study employed a machine learning (ML) screening approach and constructed a learnable weighted ensemble model (LWEM) to enhance prediction robustness for identifying effective interface passivation materials. The ML model predicted that an imidazolium salt-based interface modifier, 1-benzyl-3-methylimidazolium tetrafluoroborate (BMT), is suitable for planar n-i-p PSCs. Subsequent experimental results demonstrated that BMT provides synergistic passivation via an 'ion-coordination dual-lock' mechanism that significantly suppresses non-radiative recombination, facilitates hole extraction, and improves the quality of the perovskite film. The BMT-modified devices achieve a significant increase in power conversion efficiency (PCE) from 22.45% to 24.89% under AM 1.5G illumination, and attain a high PCE of 41.31% under 1000 lux light emitting diode (LED) indoor lighting. Additionally, the modified devices exhibit outstanding stability under long-term storage and maximum power point tracking conditions. This work provides a strategy for developing high-performance and highly stable PSCs for both indoor and outdoor applications.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60668-8
A series of Co-based molecular sieve catalysts with varying Si/Al ratios was synthesized via impregnation. Microstructural properties of Co active sites were characterized by XRD, TEM, Raman, H2-TPR, Py-FTIR, and XPS. Results indicate that surface Co species predominantly exist as CoOx nanoclusters and isolated Co2+, with the latter exhibiting superior N2O decomposition activity. Decreasing the Si/Al ratio of the MFI zeolite promotes the formation of isolated Co2+ active sites, thereby enhancing catalytic performance. Compared to Co/S-1 (pure silica support), the Co/HZ60 catalyst (low Si/Al ratio ZSM-5) lowers the temperature for complete N2O decomposition by 80 °C and demonstrates excellent resistance to O2 and NO. The strong interaction between the zeolite framework and Co2+ inhibits oxidation to Co3+, improving N2O adsorption and activation. This work provides a rational design strategy for efficient and stable Co-based catalysts for N2O abatement in industrial tail gases.