SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4417-x
Balancing mechanical strength, corrosion resistance, and soft magnetic performance in structural-functional integrated materials remains a persistent metallurgical challenge. This study reports a face-centered cubic (FCC) Fe40Co35Ni15Al3Ta2Cr5 (at.%) high-entropy alloy (HEA) that achieves an unprecedented combination of these properties. The alloy exhibits a tensile strength of ~1200 MPa, total elongation of ~25%, saturation magnetization of 101.54 Am2·kg-1, and coercivity of 267.34 A·m-1. These values surpass most reported magnetic HEAs and conventional soft magnetic alloys. In a simulated 3.50 wt.% NaCl seawater environment, the alloy demonstrates a corrosion current density of 3.99 × 10-7 A·cm-2, comparable to 316L stainless steel. The synergy arises from nanoprecipitate engineering within the FCC matrix, which impedes dislocation motion while maintaining magnetic domain wall mobility and promoting a protective passive film. This work provides a design pathway for soft magnetic structural-functional materials suitable for corrosive marine environments, where simultaneous load-bearing and magnetic actuation are required.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4404-7
Electrochemical propylene epoxidation offers a sustainable route to propylene oxide (PO), but achieving high selectivity and stability under industrial current densities remains challenging. Herein, we report a high entropy amorphous CoFeNiCrMnBOx borate loaded with high valence Pt single atoms catalyst (a-Pt-HEBO) for stable bromine radical-mediated propylene epoxidation reaction (BrPOR). The high-entropy amorphous structure reshapes the interfacial hydrogen-bonding network and enriches free water, substantially lowering the energy barrier for water dissociation. Meanwhile, the strong electronic interactions between the coordinatively unsaturated, high-valence single Pt atoms and the substrate effectively prevent transition metal dissolution at high anodic potentials. The catalyst achieved 82.1% Faraday efficiency of PO at an industrial grade current density of 100 mA cm-2, and demonstrated excellent industrial application stability in up to 500 h of continuous test and within a scaled-up electrolyzer (4 × 4 cm2). This work provides a design for high-entropy catalysts in halogen-mediated electrosynthesis and a viable pathway toward carbon-neutral PO production.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4159-y
The electrocatalytic oxidation of ethylene glycol (EG) derived from polyethylene terephthalate (PET) waste to valuable glycolic acid (GA) represents an attractive route for waste resource upcycling. However, achieving high selectivity remains challenging due to the difficulty in steering the complex reaction pathway. In this study, PdPtCuInBi high-entropy intermetallic metallene (HEI-PdPtCuInBiene) is reported to precisely control EG oxidation reaction (EGOR) pathway for GA production by constructing multiple active sites at the atomic scale. In PET hydrolysate, it achieves a Faradaic efficiency of 99.87% and a production rate of 1.47 mmol h−1 cm−2, along with excellent stability. Mechanistic studies reveal that the high-entropy structure induces strong p-d orbital hybridization, which optimizes the electronic structure of active sites, thus weakening the adsorption of key carbonyl intermediates and suppressing C–C bond cleavage. The synergistic electronic effect among Pd, Pt, and Cu further enables differential adsorption of distinct intermediates on diverse active sites, enhancing the selective formation of GA. Techno-economic analysis exhibits high profitability (~$784.9 t−1 PET) of this route, demonstrating the great potential of high-entropy intermetallic metallene in regulating electrocatalytic upcycling of PET waste and beyond.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3653-2
Designing photosensitizers with efficient intersystem crossing (ISC) and long-lived triplet excited states is critical for photodynamic therapy (PDT). However, conventional molecular design principles often rely on heavy-atom effects or specific donor-acceptor architectures, limiting generality. Here, we report a facile and rational strategy to convert intrinsically non-photosensitizing fluorophores into effective reactive oxygen species (ROS) generators by introducing guanidinium substituents. The modified photosensitizers exhibit prolonged triplet excited state lifetimes and considerable ROS production, in stark contrast to unmodified fluorophores which show intense fluorescence and negligible ROS generation. Electron paramagnetic resonance spectroscopy and high-resolution mass spectrometry confirm the formation of stable nitrogen-centered radical cations on the guanidinium moiety, stabilized by p-π conjugation. Mechanistic studies indicate that these radicals promote ISC and prolong triplet state lifetimes. In vitro and in vivo experiments demonstrate that guanidinium-modified photosensitizers induce immunogenic cell death (ICD) and elicit potent anti-tumor immunity. This work provides a universal and facile strategy for designing organic photosensitizers through stable radical cation-containing building blocks, expanding the scope of PDT agents.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202605006
Military ecological and environmental protection is a critical component of national ecological and environmental protection. Military activities and operations, such as training and drills, weapons and equipment testing, and combat, are prone to triggering a series of ecological and environmental problems, including greenhouse gas emissions, deterioration of water resources and water quality, vegetation destruction, land degradation, and typical physical and chemical pollution, which have attracted extensive global attention. This study systematically analyzed the eco-environmental impacts of military activities on multiple environmental media (atmosphere, water, and soil) across different periods, and conducted pollution source tracing in multi-media and representative regions. It reviewed the current status of ecological and environmental protection technologies for the three major environmental media, i.e., atmosphere, water, and soil, and summarized the characteristics and constraints of military ecological and environmental research. Finally, it proposed the research trends and key development directions for military ecological and environmental protection from four dimensions: data monitoring and sharing, research and development of in-situ remediation technologies for military-civilian integrated combined pollution, green construction practices for military facilities, and optimization of management systems.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(25)60626-8
The dense crystalline structure and limited accessibility of cellulose severely hinder its efficient catalytic conversion. In response, biomimetic solid acid catalysts inspired by cellulase binding domains (CBDs) have emerged as a promising strategy to enhance cellulose hydrolysis by mimicking the substrate recognition and enrichment functions of natural enzymes. This review systematically summarizes recent advances in the design of CBD-mimetic solid acids based on four representative strategies: electrostatic anchoring, hydrophobic microenvironment engineering, spatial confinement, and covalent lock-and-key mechanisms. The underlying principles of these approaches, including substrate-specific recognition, local concentration enhancement, and synergistic “adsorption-catalysis” effects, are critically discussed to elucidate their contributions in improving catalytic affinity, selectivity, and durability. Despite significant progress, challenges such as mass-transfer resistance and insufficient structural robustness remain in complex biomass conversion systems. Looking forward, the integration of sub-enzymatic materials, such as carbon quantum dots (CQDs), into biomimetic catalysts offers new opportunities to achieve efficient, recyclable, and hierarchically organized catalytic systems, thereby providing a powerful route for the sustainable valorization of cellulose and other lignocellulosic resources.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025030403
Microplastics (MPs) act as vectors for co-migrating antibiotics and heavy metals, forming complex pollution systems with potential joint toxicity. However, the differential adsorption behaviors and underlying mechanisms of MPs toward organic versus inorganic pollutants remain insufficiently understood. This study selected polypropylene (PP) microplastics, a major component of agricultural plastic films, and investigated the adsorption of sulfamethoxazole (SMX) and Cr(VI) onto aged PP under varying environmental conditions. Results demonstrated that aging increased the maximum adsorption capacity by 2–3 times for both pollutants. Notably, aged PP exhibited approximately 30 times higher adsorption capacity for SMX than for Cr(VI). Characterization revealed that aging introduced oxygen-containing functional groups (e.g., carbonyl) on the MP surface, enhancing adsorption. Mechanistic analysis indicated that hydrogen bonding and electrostatic interactions dominated SMX adsorption, while Cr(VI) adsorption was primarily governed by electrostatic interactions and pore-filling. The stronger intermolecular forces for SMX compared to reversible pore-filling for Cr(VI) explained the observed differences. Increasing pH induced electrostatic repulsion, reducing adsorption of both pollutants. High concentrations of Na+ and Mg2+ caused charge shielding, potentially enhancing Cr(VI) adsorption but inhibiting SMX adsorption due to competition for active sites. The presence of organic matter (humic acid) had negligible effects on Cr(VI) adsorption but reduced SMX adsorption, likely due to complexation. These findings elucidate distinct molecular-level pathways for organic versus inorganic pollutant adsorption on aged MPs, highlighting the roles of hydrogen bonding and pore-filling in driving differential behaviors.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202509055
Microbial communities are the core functional units in environmental biotechnology. Magnetic field technology, as a non-invasive physical enhancement method, has shown application potential in wastewater treatment and waste resource recovery. Traditional ecological theory posits a positive correlation between species diversity and system function/stability. However, magnetic field enhancement often coincides with improved system performance and decreased microbial diversity, indicating a decoupling. This review systematically explains this phenomenon as the result of magnetic field-driven functional specialization of microbial communities. Magnetic fields act on paramagnetic targets in energy metabolism, including iron-sulfur clusters and cytochromes, alter cell surface physicochemical properties, impose oxidative stress, and select strains with high metabolic flexibility, thereby achieving targeted enrichment of key functional groups such as ammonia-oxidizing bacteria and electroactive bacteria within Proteobacteria. Although such functionally specialized communities have reduced species richness, they exhibit higher energy metabolism efficiency, enhanced electron transfer capacity, optimized interspecies cooperation networks, and strengthened system robustness. These advantages collectively support efficient and stable macroscopic bioprocess performance. This study also discusses potential limitations regarding ecosystem resilience and scenario dependence, and envisions future directions such as quantitative modeling and synergy with magnetic materials to advance magnetic field technology from empirical application to rational design.