SinoGreenTech Academic Portal
LX
Verified CAS / Academic Author6 Decoded Studies

Prof. LI Xueli

School of Agricultural Engineering and Food Science, Shandong University of Technology, Shandong Research Center of Engineering & Technology for Clean Energy, Zibo 255000, China

Research Publications & English Decoded Briefs

Showing 6 publications
SCIENCE CHINA Materials2026DOI: 10.1007/s40843-025-3630-2

Dual-interface engineering strategy for optimizing carrier dynamics in perovskite-silicon tandem solar cells

This study demonstrates a dual-interface engineering approach for performance enhancement in perovskite-silicon tandem solar cells. By applying ethylenediamine dihydroiodide (EDAI2) to simultaneously modify both top and bottom interfaces of wide-bandgap perovskite layers, we achieve synergistic defect suppression and charge transport optimization. Time-resolved photoluminescence characterization reveals extended carrier lifetimes and improved spatial homogeneity in dual-modified perovskite films. The optimized single-junction wide-bandgap (>1.66 eV) perovskite solar cells attain a champion efficiency of 22.75% with enhanced operational stability. Implemented in perovskite-silicon tandem configuration, the devices achieve over 31% power conversion efficiency, validating the effectiveness of organic ligand-mediated dual-interface engineering in regulating carrier dynamics and advancing perovskite-based tandem photovoltaics.

SCIENCE CHINA Materials2026DOI: 10.1007/s40843-025-3784-9

Unravel Excited State Chirality Dynamics During Symmetry-Breaking Charge Separation

Symmetry-breaking charge separation (SB-CS) is a fundamental process in natural photosynthesis and holds promise for organic semiconductor applications. However, the influence of SB-CS on excited-state chirality has remained unexplored. Here, we employ femtosecond time-resolved circularly polarized luminescence (TRCPL) and transient absorption (TA) spectroscopy to investigate the excited-state chirality dynamics of a chiral perylenediimide bichromophore (Cy-PDI 2). Our results reveal that the locally excited (LE) state decays to a symmetry-breaking charge-separated (SB-CS) state within 88 ps in tetrahydrofuran (THF), while this process is strongly quenched in toluene (TOL). Time-dependent emission dissymmetry factor g_lum(t) extracted from TRCPL kinetics demonstrates a one-order-of-magnitude enhancement of circularly polarized luminescence after SB-CS, directly reflecting the asymmetry of electron cloud distribution on an ultrafast timescale. This work provides the first direct observation of excited-state chirality evolution during SB-CS and proposes a mechanistic framework. Our findings offer deeper insight into the origin of excited-state chirality, which is crucial for understanding efficient energy transfer, enantiospecific recognition, and asymmetric catalysis in biological and chemical systems.

Journal of Fuel Chemistry and Technology2026DOI: 10.1016/S1872-5813(26)60676-7

Investigating the migration mechanisms of heavy metals under silicate polymerization in gasification slag from landfilled municipal solid waste with rice husk addition

Landfilled municipal solid waste (MSW) in China exceeds 8 billion tons, with high moisture (30–50%) and ash content (>50%), complicating conventional treatment. Slag gasification offers a clean and resource-oriented route, but heavy metal leaching from the resulting slag poses environmental risks. This study investigates the effect of rice husk addition (5–15%) on the vitrification of landfilled-waste slag and the immobilization of heavy metals (Cr, Zn, Cu). Results show that adding 5–10% rice husk lowers the slag flow temperature to a minimum of 1213 °C, attributed to active SiO2 reacting with CaO and Fe2O3 to form low-melting eutectics like anorthite. Leaching concentrations of Cr and Zn decrease from 41.60 and 108.00 mg/L to 5.89 and 7.10 mg/L, respectively, with 10–15% rice husk. The amorphous SiO2 enhances silicate polymerization (Q3, Q4 networks), promoting physical encapsulation and chemical incorporation of heavy metals into stable phases such as Zn2SiO4 and CuFe2O4, increasing the residual fraction and reducing bioavailability. At temperatures >1400 °C, volatilization of Cu and Zn increases, with residual rates dropping to 33–60% and 31–55%, respectively, while Cr remains stable (70–123%). This work elucidates the mechanistic role of rice husk in slag structure modulation and heavy metal immobilization, providing a theoretical basis for the co-treatment of landfilled waste and biomass via a 'treating waste with waste' strategy.

Journal of Fuel Chemistry and Technology2026DOI: 10.1016/S1872-5813(26)60671-8

Catalytic conversion of CO2-rich syngas to high-quality gasoline hydrocarbons over In2O3-ZrO2/SAPO-11 catalysts

The conversion of CO2 into gasoline-range hydrocarbons represents a sustainable pathway to achieve deep decarbonization in the transportation sector. Nevertheless, the traditional Fischer-Tropsch synthesis (FTS) suffers from a broad product distribution, which restricts the achievable selectivity toward C5−C11 gasoline-range hydrocarbons to roughly 45%. This study presents the development of a bifunctional catalyst that integrates In2O3/ZrO2 metal oxides with SAPO-11 molecular sieves, aiming at efficiently converting CO2/CO mixtures into C5−C11 gasoline hydrocarbons. Catalysts with varying In/Zr ratios were prepared via co-precipitation. By employing a COx (CO/CO2) co-feeding strategy (CO/COx = 0.5), the formation of by-product CO was significantly suppressed, thereby enabling the selectivity for gasoline hydrocarbons to exceed the maximum predicted by the Anderson-Schulz-Flory (ASF) model. Notably, under identical reaction conditions, the In2Zr1Ox/SAPO-11 catalyst exhibited higher performance compared with In2O3/SAPO-11 and ZrO2/SAPO-11. The COx conversion was elevated by 1.7% and 0.2%, while the selectivity toward C5–C11 hydrocarbons was enhanced by 8.0% and 16.0%, respectively. Furthermore, the In2Zr1Ox/SAPO-11 catalyst delivered a single-pass performance of 24% COx conversion and 68% selectivity for C5−C11 hydrocarbons at 380 °C, 3 MPa and a gas hourly space velocity (GHSV) of 2400 mL/(min·g). Within this product distribution, isoparaffins accounted for 32.6% of the total components, corresponding to an isoparaffin/neoparaffin ratio of 12.3. After 150 h of stability testing, the catalyst maintained a single-pass COx conversion of 23% and a C5−C11 selectivity of ~65%, demonstrating excellent catalytic activity and promising potential for industrial application.

SCIENCE CHINA Materials2026DOI: 10.1007/s40843-025-4024-1

Self-assembled theranostic nanoplatform-mediated calcium-overload for enhanced sonodynamic therapy

Sonodynamic therapy (SDT) faces limited efficacy due to robust antioxidant systems in tumors that scavenge reactive oxygen species (ROS). To overcome this, we developed a pH/ultrasound-responsive theranostic nanoplatform, Mn-CaCO3@NGQDs/PAA, via self-assembly of nitrogen-doped graphene quantum dots (NGQDs), Mn-doped CaCO3, and polyacrylic acid (PAA). This platform synergistically combines SDT with calcium overload. Under ultrasound irradiation, it generates abundant singlet oxygen (1O2), while the acidic tumor microenvironment triggers sustained Ca2+ release, inducing calcium overload. The combined effects amplify oxidative stress, suppressing tumor growth. Additionally, the nanoplatform exhibits dual-mode T1/T2-weighted magnetic resonance imaging (MRI) performance, enabling tumor localization. In vivo studies demonstrated significant tumor inhibition and apoptosis, with no notable toxicity. This integrated strategy maximizes therapeutic efficacy, offering a promising approach for enhanced tumor therapy.

SCIENCE CHINA Materials2025DOI: 10.1007/s40843-025-3631-1

Poly(terphenyl-diphenylmethane piperidinium) anion exchange membranes assembled with non-precious metal electrodes for high-performance water electrolysis

Anion exchange membrane water electrolysis (AEMWE) offers cost and dynamic-response advantages over proton exchange membrane systems, yet commercial deployment is constrained by the alkaline stability of anion exchange membranes (AEMs) and the sluggish kinetics of non-precious metal catalysts. This work reports a series of poly(terphenyl-diphenylmethane piperidinium) (QPDPMTP) membranes synthesized with varied diphenylmethane (DPM) content. The alkyl chain of DPM induces pronounced microphase separation and elevates free volume fraction, yielding an OH− conductivity of 152 mS cm−1 at 80 °C for QPDPMTP-10. After 1032 h immersion in 6 M NaOH at 80 °C, the membrane retains 90.7% of its initial conductivity. An AEMWE cell integrating QPDPMTP-10 with a non-precious NiFeCo LDH/NiS/NF anode achieves 3.11 A cm−2 at 2 V in 1 M KOH at 80 °C and sustains 1 A cm−2 for 1800 h under gradient KOH concentration. These results establish a viable pathway for durable, low-cost AEMWE systems.

Prof. LI Xueli | Publications & Academic Profile | SinoGreenTech | SinoGreenTech