SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4295-5
Carbon nanomaterials (CNMs), including carbon nanotubes, graphene, and fullerenes, exhibit exceptional promise in precision biomedicine due to their tunable biocompatibility, programmable surface chemistry, large specific surface area, and quantum confinement effects. However, their clinical translation is hindered by aggregation, poor physiological dispersibility, and limited targeting specificity. This review systematically elaborates on surface engineering strategies—covalent functionalization, non-covalent assembly, and heteroatom doping—to optimize the multifunctionality, biocompatibility, and targeting capabilities of CNMs at the nano-bio interface. We explore how engineered interfaces enable advanced applications in biosensing, stimuli-responsive drug delivery, multimodal bioimaging, antibacterial therapy, and regenerative tissue engineering. The review also addresses challenges such as scalability, long-term toxicity, and regulatory hurdles, and proposes future directions to expedite clinical adoption. By providing a comprehensive framework for rational surface design, this work aims to bridge the gap between fundamental materials science and clinical needs, offering a roadmap for developing next-generation carbon-based theranostics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4323-8
Sulfur-based batteries are promising for next-generation energy storage due to high theoretical capacity, natural abundance, and low cost of sulfur cathodes. However, practical implementation is impeded by sluggish sulfur redox kinetics, dissolution and migration of intermediate polysulfides, and formation of insulating discharge products. Conventional catalyst design focuses on charge distribution, adsorption energetics, and structural confinement, yet these approaches incompletely describe the complex electronic processes governing sulfur conversion. Electron spin, an intrinsic quantum degree of freedom, offers an additional dimension for modulating catalytic behavior via its influence on electronic structure and orbital interactions at catalytic interfaces. In spin-polarized systems, changes in occupation and splitting of transition-metal d orbitals can regulate d-p hybridization with sulfur species, affecting interfacial charge transfer and energetics of sulfur redox reactions. This review summarizes recent progress in elucidating and manipulating electron spin in sulfur-based battery systems. Fundamental principles connecting spin states with electronic structure and catalytic behavior are outlined, followed by experimental approaches for probing spin-related electronic properties using spectroscopic and magnetic characterization techniques. Emerging strategies for spin regulation are highlighted, including heteroatom doping, defect engineering, coordination environment modulation, chirality-induced spin selectivity, and external magnetic-field control. Remaining challenges in identifying spin effects under realistic electrochemical conditions are addressed, along with opportunities for integrating spin-related descriptors into catalyst design. Establishing quantitative relationships between spin polarization, orbital hybridization, and sulfur reaction pathways may provide new perspectives for high-performance sulfur-based batteries.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3771-9
High-entropy carbonitride ultra-high temperature ceramics (HECN-UHTCs) typically require high densification temperatures, leading to grain coarsening and degraded mechanical properties. This study introduces CrSi2 as a sintering additive for (Ti, Zr, Hf, Nb, Ta)(C, N), effectively reducing the densification temperature by 200 °C. During sintering, interdiffusion and cation exchange result in the formation of an orthorhombic (Ti, Zr, Nb)2Cr4Si5 phase within the ceramic matrix. The resulting dual-phase ceramic exhibits a hardness of 24.65 ± 0.23 GPa and a fracture toughness of 6.03 ± 0.48 MPa m1/2, significantly surpassing most reported HECN-UHTCs. Enhanced mechanical properties are attributed to crack deflection, increased localized lattice strain, and Cr grain boundary segregation. This liquid phase-assisted low-temperature sintering strategy offers a promising pathway for densifying other ultra-high temperature ceramics.
New Carbon Materials•2026•DOI: 10.1016/S1872-5805(25)61033-X
Carbon-based materials have gained significant attention in anticancer treatment due to their exceptional biocompatibility, yet critical challenges persist in establishing definitive correlations between their porous structures and functional performance. We report the use of a silica template to guide pore formation in the design of mesoporous carbon spheres (mC) with tailored pore structures for improved combined photothermal-chemotherapy. The mesopore size of mC was adjusted by kinetic control of resin polymerization and silica hydrolysis. Structural characterization showed that 4.4 nm mesopores enabled an exceptional gemcitabine loading of 228 mg g−1 and a sustained pH/thermal dual-responsive release with >70% drug release under near-infrared (NIR) irradiation. Finite element analysis demonstrated pore size-dependent heat transfer dynamics, with the improved mC achieving a superior photothermal conversion efficiency of 62% by a combination of N-doping and defect engineering. In vitro evaluations confirmed outstanding biocompatibility with >95% cell viability at 200 μg mL−1 and potent tumor suppression in pancreatic and biliary cancer models with an ~5% cell viability at 25 μg mL−1 where combined therapy showed a 3.7-fold increased cytotoxicity over monotherapy. The improved structure of mC facilitated cascade therapeutic effects with enhanced tumor permeability derived from NIR-triggered hyperthermia and prolonged therapeutic exposure due to pH-responsive drug release. This pore engineering strategy establishes a structure-function process for next-generation theranostic platforms, addressing the critical limitations of conventional pancreatic and biliary cancer therapies through spatiotemporal control of multimodal treatment.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3637-6
Traditional optical fiber communication encryption methods lack sufficient dynamic adaptability and hardware flexibility, while reconfigurable logic gates can overcome this limitation, thereby significantly improving the flexibility of encryption systems. This study reports a reconfigurable optoelectronic logic gate (OELG) system based on hafnium-zirconium oxide (HZO) ferroelectric thin films. Through ultra-low temperature atomic layer deposition technique, the fabricated HZO thin films demonstrate an exceptional pyroelectric coefficient of 1835.91 μC m−2 K−1 and robust multi-level polarization stability, enabling efficient broadband photon-to-current conversion. By leveraging the pyroelectric effect and tunable polarization states, the OELG device achieves dynamic optical signal modulation and logic processing. The OELG device supports five fundamental logic operations (AND, OR, NAND, NOR, NOT) via electrical bias and polarization control, without requiring hardware modifications. The OELG device demonstrates stable performance over 10^9 cycles with no degradation, meeting practical application requirements. Furthermore, a convolutional neural network (CNN)-integrated image encryption-decryption framework was validated, achieving 95.01% recognition accuracy on decrypted data, while unauthorized decryption attempts resulted in significant feature loss. This study addresses security challenges in optical communication networks by proposing an innovative solution that integrates pyroelectric materials with reconfigurable logic gate technology, offering a new pathway to enhance physical-layer security.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202506053
Red mud, a highly alkaline industrial solid waste from alumina production, poses severe environmental risks due to its high alkalinity, low organic matter content, and poor aggregation, which critically impede its soil reconstruction and ecological utilization. This study proposes a novel approach of low-temperature micro-oxidation to drive the synergistic soil reconstruction of red mud and coal. By constructing a low-temperature micro-oxidation atmosphere, the soil properties of the reaction products were investigated, the decomposition and reconstruction of alkaline minerals and alkali release were analyzed, and the oxidation of carbon-based minerals and organic matter transformation in coal were examined. The mechanism of the synergistic reaction between red mud and coal under low-temperature micro-oxidation was elucidated. Results showed that at 250 °C under micro-oxidation, the pH of the product decreased to 8.47, organic matter content increased to 12.98%, and the proportion of aggregates >0.250 mm increased. Alkaline minerals such as cancrinite and grossular in red mud underwent decomposition and reconstruction in the low-temperature hydrothermal environment, releasing substantial free alkali. The condensed aromatic rings of carbon-based minerals in coal were oxidized by free radicals, leading to ring-opening and bond cleavage, producing small-molecule organic acids and macromolecular humic acids. The continuous oxidation of carbon-based minerals in coal generated acids, which neutralized the alkali released from red mud, driving sustained dealkalization. The inorganic particles of red mud flocculated with macromolecular humic acids, forming micro-aggregates and significantly improving soil properties. This research provides technical support for the rapid ecological utilization of red mud at industrial scale.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202604025
To meet the minute-level early-warning requirements for odor and multi-pollutant emissions at waste treatment facilities, this study proposed a multivariate short-term time-series prediction framework applicable to multi-tier scenarios covering source and boundary points (i.e., workshops and plant boundaries). Based on continuous online monitoring data with a 5-second resolution, a long short-term memory (LSTM) model using a sliding-window and recursive multi-step prediction strategy was constructed to jointly model odor concentration (OU) and pollutants including VOCs, NH3, H2S, and CH3SH (mg/m³). An evaluation protocol aligned with environmental supervision practice was established, incorporating mean absolute error (MAE), root mean square error (RMSE), goodness-of-fit (R²), skill scores (SS) relative to a persistence baseline, and threshold-based error stratification to characterize uncertainty during peak emission periods. The results showed that at workshop monitoring sites with relatively stable operating conditions, VOCs, NH3, H2S, and CH3SH exhibited a high goodness of fit and low prediction errors. In contrast, at boundary sites affected by plume arrival delays and diffusion-dilution non-stationarity, OU and VOCs displayed significantly amplified errors during peak episodes, and the skill score advantage over the baseline became unstable at certain sites. Stratified analysis consistently revealed that non-peak periods outperformed peak periods, indicating that event-driven fluctuations were the main sources of error. Accordingly, this study suggested incorporating exogenous variables such as wind speed and direction, ventilation and gate access control, and operational rhythms, along with peak-sensitive loss functions, into the model to enhance its capacity to characterize and provide early warnings for transient emission pulses. Overall, this study established a reusable methodological baseline and evaluation paradigm for minute-scale multi-pollutant prediction, providing quantitative support for the operational management and source-to-boundary coordinated control of waste treatment facilities.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60661-5
Hierarchical aluminum-rich zeolites are promising catalysts for Knoevenagel condensation, but their synthesis is often costly and energy-intensive. This work reports a green route to hierarchical NaY zeolite using submolten salt (SMS) activated perlite as the sole silicon and aluminum source. The product exhibits high purity and crystallinity, with a framework SiO2/Al2O3 molar ratio of approximately 4.2, intercrystalline mesopores centered at about 20 nm, large external surface area, and abundant basic sites. Crystallization studies reveal that small crystals initially assemble on the activated perlite surface, then grow and aggregate to form a crystal-packed morphology with intercrystalline mesopores. In the Knoevenagel condensation of benzaldehyde with ethyl cyanoacetate, the hierarchical NaY zeolite achieves higher benzaldehyde conversion than conventional NaY zeolites, attributed to improved mass transfer and increased basic site accessibility. This work provides a cost-effective and sustainable catalyst while valorizing natural perlite.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4158-6
Near-infrared piezochromic materials exhibiting luminescence responses are critical for mechanical sensors and storage devices. Covalent organic frameworks (COFs), as crystalline porous materials, combine structural adaptability with tunable photophysical properties, yet their piezochromic applications remain underexplored. Here, we report a series of donor-acceptor structured two-dimensional COFs (2D COFs) with bright red emission, all showing pronounced red-shifts spanning red to near-infrared regions. Notably, Py-BO-COF exhibits the largest piezochromic shift of 187 nm with a high sensitivity of 44.52 nm GPa−1, significantly surpassing Py-BT-COF, TPE-BO-COF, and most reported COF/MOF systems. Py-BO-COF also demonstrates fully reversible and repeatable emission switching over multiple cycles, maintaining excellent linearity without degradation. In situ spectroscopic analyses and theoretical simulations reveal that variations in piezochromic rates arise from differences in charge-transfer (CT) processes, while the pronounced red-shift in Py-BO-COF is associated with reduced interlayer distance and enhanced coplanarity. This study systematically establishes the structure-property relationship in piezochromic 2D COFs, offering strategic guidance for designing highly sensitive and reversible pressure-responsive materials, thereby advancing smart piezochromic systems.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4015-5
Mechanochromic photonic crystals are promising for smart optical materials due to their tunable photonic stop band. Here, we report interface-engineered transparent and mechanochromic non-close-packed photonic crystals (NPCs) by incorporating polystyrene@vinyl-modified SiO2 (PS@V-SiO2) nanospheres (n_PS=1.59, n_V-SiO2=1.46) into a photocurable phenoxypolyethylene glycol acrylate (PEGPEA) matrix (n_PEGPEA=1.52). The nanospheres formed solvation-mediated liquid NPCs in the precursor. Ultraviolet (UV) curing promoted copolymerization between surface C=C bonds of nanospheres and the matrix, which reduced interfacial scattering and enabled highly transparent NPC films. Meanwhile, non-uniform polymer shrinkage led to variations in the ordering of nanospheres, especially in structures with a low volume fraction (φ ≤ 0.23). Under external strain (ε: 0–64%), the film exhibited a dynamic color response. Initially, stretching enhanced the ordering of the nanospheres and the reflection intensity of NPCs, thereby activating the structural color. Further deformation, however, introduced defects and reduced the reflectivity. A blue shift of ~213 nm was achieved in an NPC (φ = 0.23) fabricated by 170 nm of PS@V-SiO2 nanospheres, accompanied by a color gradient from red to blue. Comparisons across SiO2–poly(ethylene glycol) diacrylate (PEGDA, n_PEGDA=1.45), SiO2–PEGPEA, and PS@V-SiO2–PEGDA NPC systems highlighted the key role of interfacial scattering, which is affected by the synergistic effects of interfacial covalent polymerization, refractive index matching between the elastomer matrix and nanospheres, and the crosslinking density. This work demonstrates spectrally tunable mechanochromism via size control and patterned anti-counterfeiting labels, thereby providing insights for designing advanced anti-counterfeiting materials applicable in flexible electronics and displays.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4018-6
The pursuit of advanced wear-resistant materials for cryogenic applications is often hindered by a fundamental trade-off between enhancing strength and damage tolerance. CoCrNi-based medium-entropy alloys (MEAs), while excellent in cryogenic toughness, suffer from this very limitation. Although second-phase reinforcement boosts strength, the strain incompatibility between phases inevitably triggers cracking, which is severely exacerbated at low temperatures. This work introduces a novel microstructural design strategy based on regulated partial recrystallization to overcome this long-standing challenge. By tailoring the thermomechanical processing of a (CoCrNi)90Mo10 MEA, we engineered a unique architecture where a fully recrystallized FCC phase is homogeneously embedded within a continuous skeleton of a hard, non-recrystallized σ phase. The alloy with this optimized microstructure achieved a remarkably low wear rate at 113 K that is less than half of its as-cast and fully recrystallized counterparts. The experimental and modeling results indicate the underlying synergy: the σ skeleton provides robust structural support and distributes stress deeply, while the recrystallized FCC phase, with its high density of grain boundaries and annealing twins, acts as a compliant strain-accommodating medium, effectively suppressing interfacial cracking. This combined 'skeleton effect' and 'recrystallization effect' not only delivers exceptional cryogenic wear resistance but also offers a practical strategy for designing high-performance, crack-resistant dual-phase composites for extreme environments.
SCIENCE CHINA Materials•2025•DOI: 10.1007/s40843-025-3512-2
Liquid-phase chemically deposited lead sulfide (PbS) thin films are a cost-effective platform for extended short-wavelength infrared (eSWIR) detection, yet their performance is constrained by high densities of sulfur vacancies and oxygen-in-sulfur defects formed during deposition. This work introduces chloride ions as an in-situ additive during chemical bath deposition to passivate these defects. The similar ionic radius of Cl⁻ (176 pm) to S²⁻ (179 pm) and its coordination with Pb²⁺ enable substitutional incorporation without significant lattice distortion. The passivated films exhibit a near-unity Pb/S atomic ratio, a photoluminescence full-width at half-maximum of 75 meV, and a carrier lifetime increase exceeding 20-fold. Homojunction photodiodes fabricated from these films demonstrate a dark current density of 3.1 μA/cm² at 0 V, a responsivity of 0.79 A/W at 2.5 μm, a specific detectivity of 8.79 × 10⁹ Jones, and a response time of 19.6 μs. The resistance-area product (R₀A) reaches 8.78 Ω cm² at 300 K and 6.16 kΩ cm² at 80 K. Activation energy analysis reveals trap-assisted tunneling as the dominant dark current mechanism at higher reverse biases, attributed to grain boundaries. These results represent among the best reported performance for PbS bulk thin-film photodiodes and offer a scalable route to high-performance eSWIR sensors.