SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3625-3
Zirconia (ZrO2)-based fluorite ferroelectric materials are promising for nonvolatile memory and logic devices due to their CMOS compatibility and cost advantages over hafnium oxide (HfO2). However, the metastable nature of the ferroelectric orthorhombic phase (o-phase) hinders practical application. Here, we report the strain-mediated stabilization of the ferroelectric o-phase in ZrO2 thin films grown on niobium-doped strontium titanate (NSTO) substrates with different crystallographic orientations via chemical solution deposition. Systematic structural and ferroelectric characterization, combined with simulation, reveals that substrate orientation controls in-plane tensile strain, selectively promoting epitaxial growth of the o-phase. The ZrO2 film on NSTO(110) exhibits the highest o-phase content, achieving a remanent polarization (2Pr) of 92.64 μC/cm², which remains as high as 88.54 μC/cm² after resistive-capacitive (RC) delay calibration. The device shows endurance of approximately 10^7 cycles with favorable fatigue characteristics. X-ray absorption spectroscopy (XAS) further indicates distortion of Zr-O tetrahedra, providing microscopic insight into the ferroelectricity. This work presents a novel strategy for property tuning of ZrO2 films and supports their application in storage and logic devices.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3740-y
The continuous advancement of bionanomaterial technology has driven significant strategic transformations in the design and fabrication of biomimetic nanocarriers. This review systematically traces the evolution from single-cell membrane nanovesicles to hybrid cell membrane nanovesicles integrating multiple cell membranes, culminating in cell membrane hybrid lipid nanoparticles (CM-LNPs) that combine natural cell membranes or membrane proteins with engineered synthetic phospholipids. This technological progression enables the synergistic retention of multicellular biological functions while incorporating advantageous synthetic material properties, such as enhanced engineering flexibility and surface modifiability. The article critically evaluates the advantages and limitations of traditional extrusion and ultrasonication methods for preparing cell membrane nanovesicles, highlighting the benefits and development prospects of novel microfluidic techniques in CM-LNP fabrication. Furthermore, it explores future application prospects and challenges of CM-LNPs in the biomedical field, particularly in drug delivery systems and precision medicine. The review underscores the potential of CM-LNPs to overcome clinical limitations of conventional liposomes, such as poor stability, rapid drug leakage, and inadequate targeting, by leveraging the natural homing effect of cell membranes and the tunability of synthetic lipids. Emphasis is placed on the role of microfluidics in achieving precise, scalable, and reproducible fabrication, which is critical for clinical translation. The abstract synthesizes current knowledge and identifies key research gaps, offering a forward-looking perspective on the engineering of biomimetic nanoparticles for advanced therapeutic applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3947-3
Fiber photodetectors (FPDs) with high deformability, flexible designability, and seamless integrability with everyday textiles hold tremendous potential for next-generation wearable optoelectronics. Inorganic semiconductors (ISCs) are considered ideal building blocks to design and govern the functions of FPDs owing to their superior electrical and optical properties. Recent developments in wearable technology of ISCs, especially in fiber form factor, have driven the creation of various FPDs with smart capabilities, from light sensing, information interfacing, to sophisticated logic operating, revolutionizing human-machine interaction paradigms in many emerging fields. Herein, we present a comprehensive review of recent progress of ISC-based FPDs. Firstly, key design principles for ISC-based FPDs are explored, encompassing material selection, fabrication technologies, device architectures, and textile integration strategies. Then, how defect engineering, alignment engineering, and heterojunction engineering of ISCs can control the optoelectronic performance of FPDs is examined. Following this, potential wearable applications of ISC-based FPDs in optical communication, image sensing, and health monitoring are analyzed. Finally, the challenges and perspectives for the design of high-performance ISC-based FPDs are outlined.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3702-0
Construction of metal-mediated redox sites is an appealing approach to enhance photocatalytic CO2 reduction coupled with H2O oxidation. However, conventional static redox sites generally lack spatiotemporal matching during reaction processes due to the constraints of rigid structure and the linear scaling relationship of adsorbed species. Herein, an alkanolamine-Ir synergistic system was developed, where flexible monoethanolamine (MEA) molecules function as molecular ferries to selectively adsorb CO2 via carbamate formation, while adjacent Ir nanoparticles (NPs) serve as H spillover hubs that relay protons, creating spatiotemporal adaptability that synchronizes CO2 reduction and water oxidation. In addition, time-resolved in situ spectroscopy directly captures the rapid transformation of carbamate intermediates concurrent with sustained IrOOH intermediates formation. Microkinetic modeling further demonstrates that the MEA-Ir modified system (M-Ir/ACN) creates interconnected H spillover networks between Ir NPs and MEA, facilitating efficient proton transport that drives *COOH formation with a favorable thermodynamic energy. As a result, the M-Ir/ACN achieves a 20-fold increase in CO production compared to the pristine sample while maintaining high stability throughout 45 h of continuous operation. This study presents that flexible molecular ferries boost CO2 adsorption, and deciphers how flexible molecular-metal synergy directs the trafficking of CO2-derived intermediates toward highly efficient CO2 photoreduction.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2024102303
Fluoride-containing wastewater treatment typically relies on calcium-based precipitation and flocculation, which suffer from low compliance rates and difficult valorization of fluoride-laden sludge. This study introduces a novel bismuth upconversion luminescent glass (BULG) synthesized from Bi2O3, SiO2, Yb2O3, and Er2O3, designed for efficient fluoride removal and subsequent photocatalytic application. By varying the Bi2O3:SiO2 molar ratio, a series of BULGs with superior upconversion luminescence were obtained. Under optimal conditions (Bi3+:F− molar ratio = 1:1, pH = 2), fluoride removal efficiencies exceeded 97% for all compositions, with the 0.7:0.3 Bi2O3:SiO2 formulation achieving 99.9% removal and rapid settling of the precipitate. The fluoride removal products retained upconversion luminescence and exhibited semiconductor heterojunctions, enabling complete photocatalytic degradation of ciprofloxacin (100% within 60 min). This approach not only efficiently removes fluoride ions but also valorizes the waste into a functional photocatalyst, offering a promising strategy for fluoride-containing wastewater treatment.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202408057
Urban waterlogging, exacerbated by climate change and rapid urbanization, poses increasing risks, particularly in coastal low-lying areas with dense river networks. This study simulated waterlogging in the Shajing River drainage area of the Maozhou River basin, Shenzhen, using the SOBEK hydrodynamic model. Under a 5-year return period rainfall, 47 manholes overflowed and 31.29% of stormwater pipes operated at full capacity. Twelve waterlogging-prone points were identified: eight due to insufficient drainage capacity and five due to river backflow from low elevation. Two optimization schemes were compared: enlarging pipe diameters and implementing Low Impact Development (LID) measures. Pipe enlargement reduced overflowing manholes by 32 and full-flow pipe length by 20%, effectively decreasing surface ponding. LID measures reduced overflowing manholes by only 4 and full-flow pipe length by 1.5%, but decreased maximum flooding depth by nearly 1 m, alleviating drainage system burden. The study highlights the complex causes of coastal urban waterlogging, especially river backflow under tidal influence, and recommends considering sea-level rise and storm surge in drainage design. The findings provide valuable references for attributing waterlogging causes and planning drainage network upgrades in coastal cities.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4040-0
High-performance organic second-order nonlinear optical (NLO) crystals face a persistent challenge: molecular designs that enhance hyperpolarizability often crystallize into centrosymmetric or nonpolar arrangements, suppressing bulk second-order response, while simultaneously reducing optical bandgaps, enforcing a trade-off between nonlinearity and transparency. We report a chirality-driven polar lattice engineering strategy that couples molecular asymmetry with directional intermolecular interactions to promote polar ordering. A binaphthyl-based chromophore (S-3) crystallizes in the polar space group P2₁, exhibiting strong second-harmonic generation (~3.53 × KDP), wide transparency (3.91 eV), phase-matchable birefringence (Δn = 0.15), high laser damage threshold (742.6 MW cm⁻²), and thermal stability up to 210 °C. Theoretical calculations reveal a 69% enhancement in first-order hyperpolarizability (β_tot) relative to the unfunctionalized derivative, with a net intramolecular electron transfer of 0.16 e⁻ from the chiral scaffold to the benzoate acceptor. Crucially, enantiomeric crystals exhibit identical NLO responses, confirming that bulk nonlinearity is governed by engineered lattice polarity, not molecular handedness. This work establishes chirality as an active tool for crystal engineering and provides a general design paradigm for high-performance organic NLO materials.