SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3588-2
The rapid evolution of aerospace technology necessitates the development of multi-functional composites that combine light weight, mechanical robustness, thermal protection/insulation, and electromagnetic interference (EMI) shielding. C/SiC porous ceramic composites are promising for thermal protection in hypersonic vehicles. Here, we report a facile strategy to fabricate Cf/SiC composite polymer-derived ceramics (PDCs) via re-pyrolysis of high-energy ball-milled polycarbosilane-vinyltriethoxysilane-graphene oxide (PVG) with Cf/SiC(rGO)p blend interleaves. In-situ generated honeycomb-like cellular structures and non-directional channels reduce density and increase porosity. High-quality SiO2 joints, formed from Si-dangling bonds, strengthen interfacial bonding via a brazing effect, while in-situ SiOC nanowires (SiOCnws) create a hierarchically enhanced network, improving fracture toughness and crack resistance. Multi-scale interfacial/dipole polarization enhances EMI shielding. The optimized Cf(0.2)/SiC(rGO) composite exhibits low density (1.49 g cm−3), high fracture toughness (6.32 MPa m1/2), hardness (7.18 GPa), compressive strength (72.67 MPa), and EMI shielding effectiveness of 58.31 dB. It maintains structural stability under butane blowtorch ablation at ~1300 °C for 3600 s. Porous variants show thermal conductivity of 0.211 W m−1 K−1 with 69.74% porosity. These multi-functional composites are promising for thermal protection systems in aerospace applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3694-3
Lithium metal anodes (LMAs) are among the most promising candidates for next-generation batteries with high energy density. However, their practical application is hindered by persistent challenges such as dendritic lithium growth, unstable solid electrolyte interphases (SEI), and poor Coulombic efficiency. Surface coating has emerged as a viable solution to address these limitations. In particular, atomic and molecular layer deposition (ALD/MLD) techniques offer unparalleled control over the fabrication of ultrathin, conformal coatings, making them especially suitable for stabilizing LMA interfaces. This review comprehensively summarizes recent progress in applying ALD and MLD methodologies to construct durable artificial interphases on LMAs. We discuss the underlying mechanisms through which these coatings inhibit dendrite formation, improve interfacial integrity, and facilitate uniform lithium-ion transport. The roles of inorganic ALD coatings, organic MLD coatings, and their organic–inorganic hybrids are systematically examined, with a focus on their chemical composition, deposition behavior, and electrochemical characteristics. Moreover, we highlight the enhanced performance achieved through the integration of ALD/MLD-engineered interfaces in full-cell systems. The review concludes with a discussion of current challenges and potential research avenues aimed at advancing the rational development of effective LMA protection strategies. Overall, this work offers valuable insights into the role of interfacial engineering via ALD and MLD in enabling the practical deployment of lithium metal batteries.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202512052
Constructed wetlands (CWs) with conventional substrates often exhibit limited removal of nitrogen and antibiotics from secondary effluent. This study developed an iron-carbon-manganese ore (Fe-C-Mn) composite substrate CW to enhance simultaneous removal of nitrogen and tetracycline (TC). Under influent TC of 2 mg·L−1 and total nitrogen (TN) of 15 mg·L−1, the Fe-C-Mn system achieved average TC removal of 91.3%, significantly higher than the gravel control (27.2%). TN and nitrate nitrogen (NO3−-N) removals reached 71.7% and 83.3%, respectively, versus 7.8% and 1.2% in the control. Substrate analysis revealed increased surface roughness and synergistic generation of active components (Fe(II)/Fe(III) and Mn(II)), driving autotrophic denitrification and TC biodegradation/chemical degradation. Microbial community analysis indicated reduced overall diversity but selective enrichment of potential TC degraders (e.g., Trichosporon, Bacillota) and denitrifiers (e.g., unclassified_f_Rhodocyclaceae). TC degradation pathways included demethylation, hydroxylation, and ring-opening, ultimately yielding small metabolites. These findings provide theoretical and technical support for enhanced removal of antibiotics and nitrogen from secondary effluent using CWs.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4185-6
Electrochemical uranium extraction from fluorine-containing nuclear wastewater is critical for nuclear fuel recovery, yet current electrode materials suffer from limited scalability and insufficient long-term stability. Here, we report a bulk monoclinic Nb2O5−x (H-Nb2O5−x) derived from commercial bulk niobium oxide via rapid reconstruction, exhibiting exceptional activity and robustness for electrochemical uranium extraction in fluorine-rich environments. The intrinsic active pairs of low-valent Nb4+ and compact oxygen structure strongly bind with dominant uranyl fluoride species (UO2F+, UO2F2, UO2F3−, UO2F4^2−), facilitating efficient separation. In a 30 g L−1 fluoride solution, H-Nb2O5−x achieved a uranium extraction efficiency of 99.1%. Notably, in a 10-L real nuclear wastewater test, the bulk material maintained stable performance over 40 days, reducing uranium concentration from 1372.3 mg L−1 to 0.93 mg L−1. This work demonstrates a scalable, durable electrode material for industrial electrochemical uranium extraction, addressing the bottlenecks of complexation and stability in fluoride-containing waste streams.